STC12单片机OLED显示字符串、中文

已于 2022-02-18 12:28:10 修改
阅读量3.7k 收藏 53
点赞数 6
分类专栏： STC12C5A60S2库 文章标签： 单片机
于 2022-01-30 20:34:55 首次发布
原文链接：https://blog.csdn.net/lzxiaotu?spm=1011.2124.3001.5343
版权

快速导航
STC12已封装好的函数库

1、 OLED初始化

/**********************************************************
 *程序名称：OLED.c
 *开发环境：Keil C51
 *程序功能：OLED基本显示函数
 *硬件设备：STC12C5A60S2
 *编写时间：2021.7.21
 *注意事项：程序运行需包含"oled.h"头文件
 *作者：小途
 **********************************************************/
 
 
 
 
#include "oled.h"
#include "LQ12864.h"

/*I2C通信接口*/
sbit SCL = P0^7;//串行时钟
sbit SDA = P0^6;//串行数据


/*常用宏定义*/
#define high 1
#define low 0

#define	Brightness	0xCF 
#define X_WIDTH 	128
#define Y_WIDTH 	64


/***OLED驱动程序用的延时程序**********/
void OLED_delay(unsigned int z)
{
	unsigned int x,y;
	for(x=z;x>0;x--)
		for(y=110;y>0;y--);
}

/**********************************************
//IIC Start
**********************************************/
void IIC_Start()
{
   SCL = high;		
   SDA = high;
   SDA = low;
   SCL = low;
}

/**********************************************
//IIC Stop
**********************************************/
void IIC_Stop()
{
   SCL = low;
   SDA = low;
   SCL = high;
   SDA = high;
}


/**********************************************
// 通过I2C总线写一个字节
**********************************************/
void Write_IIC_Byte(unsigned char IIC_Byte)
{
	unsigned char i;
	for(i=0;i<8;i++)
	{
		if(IIC_Byte & 0x80)
			SDA=high;
		else
			SDA=low;
		SCL=high;
		SCL=low;
		IIC_Byte<<=1;
	}
	SDA=1;
	SCL=1;
	SCL=0;
}

/**OLED写数据******************/ 
void OLED_WrDat(unsigned char IIC_Data)
{
	IIC_Start();
	Write_IIC_Byte(0x78);
	Write_IIC_Byte(0x40);			//write data
	Write_IIC_Byte(IIC_Data);
	IIC_Stop();
}

/**OLED写命令************/
void OLED_WrCmd(unsigned char IIC_Command)
{
	IIC_Start();
	Write_IIC_Byte(0x78);            //Slave address,SA0=0
	Write_IIC_Byte(0x00);			//write command
	Write_IIC_Byte(IIC_Command);
	IIC_Stop();
}

/**OLED 设置坐标***********/
void OLED_Set_Pos(unsigned char x, unsigned char y) 
{ 
	OLED_WrCmd(0xb0+y);
	OLED_WrCmd(((x&0xf0)>>4)|0x10);
	OLED_WrCmd((x&0x0f)|0x01);
} 

/***OLED全屏************************************/
void OLED_Fill(unsigned char bmp_dat) 
{
	unsigned char y,x;
	for(y=0;y<8;y++)
	{
		OLED_WrCmd(0xb0+y);
		OLED_WrCmd(0x01);
		OLED_WrCmd(0x10);
		for(x=0;x<X_WIDTH;x++)
		OLED_WrDat(bmp_dat);
	}
}

/**OLED复位************************************/
void OLED_CLS(void)
{
	unsigned char y,x;
	for(y=0;y<8;y++)
	{
		OLED_WrCmd(0xb0+y);
		OLED_WrCmd(0x01);
		OLED_WrCmd(0x10);
		for(x=0;x<X_WIDTH;x++)
		OLED_WrDat(0);
	}
}

/**OLED初始化***/
void OLED_Init(void)
{
	OLED_delay(500);//初始化之前的延时很重要！
	OLED_WrCmd(0xae);//--turn off oled panel
	OLED_WrCmd(0x00);//---set low column address
	OLED_WrCmd(0x10);//---set high column address
	OLED_WrCmd(0x40);//--set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)
	OLED_WrCmd(0x81);//--set contrast control register
	OLED_WrCmd(Brightness); // Set SEG Output Current Brightness
	OLED_WrCmd(0xa1);//--Set SEG/Column Mapping     0xa0左右反置 0xa1正常
	OLED_WrCmd(0xc8);//Set COM/Row Scan Direction   0xc0上下反置 0xc8正常
	OLED_WrCmd(0xa6);//--set normal display
	OLED_WrCmd(0xa8);//--set multiplex ratio(1 to 64)
	OLED_WrCmd(0x3f);//--1/64 duty
	OLED_WrCmd(0xd3);//-set display offset	Shift Mapping RAM Counter (0x00~0x3F)
	OLED_WrCmd(0x00);//-not offset
	OLED_WrCmd(0xd5);//--set display clock divide ratio/oscillator frequency
	OLED_WrCmd(0x80);//--set divide ratio, Set Clock as 100 Frames/Sec
	OLED_WrCmd(0xd9);//--set pre-charge period
	OLED_WrCmd(0xf1);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
	OLED_WrCmd(0xda);//--set com pins hardware configuration
	OLED_WrCmd(0x12);
	OLED_WrCmd(0xdb);//--set vcomh
	OLED_WrCmd(0x40);//Set VCOM Deselect Level
	OLED_WrCmd(0x20);//-Set Page Addressing Mode (0x00/0x01/0x02)
	OLED_WrCmd(0x02);//
	OLED_WrCmd(0x8d);//--set Charge Pump enable/disable
	OLED_WrCmd(0x14);//--set(0x10) disable
	OLED_WrCmd(0xa4);// Disable Entire Display On (0xa4/0xa5)
	OLED_WrCmd(0xa6);// Disable Inverse Display On (0xa6/a7) 
	OLED_WrCmd(0xaf);//--turn on oled panel
	OLED_Fill(0x00); //初始清屏
	OLED_Set_Pos(0,0);
}

2、OLED显示中文字符

void OLED_P16x16Ch(unsigned char x, y, N)
{
	unsigned char wm=0;
	unsigned int adder=32*N;
	OLED_Set_Pos(x , y);
	for(wm = 0;wm < 16;wm++)
	{
		OLED_WrDat(F16x16[adder]);
		adder += 1;
	}
	OLED_Set_Pos(x,y + 1);
	for(wm = 0;wm < 16;wm++)
	{
		OLED_WrDat(F16x16[adder]);
		adder += 1;
	} 	  	
}



/*******16*16的点阵字体取模方式：共阴——列行式——逆向输出*********/
unsigned char code F16x16[] = 	  
{ 

  //超(0) 声(1) 波(2) 测(3) 距(4) ：(5)

0x40,0x48,0x48,0x48,0xFF,0x48,0x48,0x42,0xA2,0x9E,0x82,0xA2,0xC2,0xBE,0x00,0x00,
0x80,0x60,0x1F,0x20,0x7F,0x44,0x44,0x40,0x4F,0x48,0x48,0x48,0x48,0x4F,0x40,0x00,/*"超",0*/

0x04,0x14,0xD4,0x54,0x54,0x54,0x54,0xDF,0x54,0x54,0x54,0x54,0xD4,0x14,0x04,0x00,
0x80,0x60,0x1F,0x02,0x02,0x02,0x02,0x03,0x02,0x02,0x02,0x02,0x03,0x00,0x00,0x00,/*"声",1*/

0x10,0x60,0x02,0x0C,0xC0,0x00,0xF8,0x88,0x88,0x88,0xFF,0x88,0x88,0xA8,0x18,0x00,
0x04,0x04,0x7C,0x03,0x80,0x60,0x1F,0x80,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00,/*"波",2*/

0x10,0x60,0x02,0x8C,0x00,0xFE,0x02,0xF2,0x02,0xFE,0x00,0xF8,0x00,0xFF,0x00,0x00,
0x04,0x04,0x7E,0x01,0x80,0x47,0x30,0x0F,0x10,0x27,0x00,0x47,0x80,0x7F,0x00,0x00,/*"测",3*/

0x00,0x3E,0x22,0xE2,0x22,0x3E,0x00,0xFE,0x22,0x22,0x22,0x22,0x22,0xE2,0x02,0x00,
0x20,0x3F,0x20,0x1F,0x11,0x11,0x00,0x7F,0x44,0x44,0x44,0x44,0x44,0x47,0x40,0x00,/*"距",4*/

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x36,0x36,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"：",5*/



};

字模软件(PCtoLCD2013)设置
请添加图片描述

3、OLED显示字符

//显示字符
void OLED_Show_Char(uint8 row, uint8 col, uint8 ascii_char)
{
	uint8 i,j;
	
	i = ascii_char - ' ';	//获取字符偏移量，这是因为字库跟标准ASCII码表相差32，即一个空格
	
	
	OLED_WrCmd(0xB0+(row&0x07));//设置页地址		
	OLED_WrCmd((col&0x0F));//设置列地址
	OLED_WrCmd(((col&0xF0)>>4)|0x10);
	for(j=0; j<8; j++)
	{
		OLED_WrDat(oled_fonts1608[i][j]);
	}
	OLED_WrCmd((0xB0+(row&0x07)+1));	//设置下一页地址
	OLED_WrCmd((col&0x0F));			//设置列地址
	OLED_WrCmd(((col&0xF0)>>4)|0x10);
	for(j=0; j<8; j++)
	{
		OLED_WrDat(oled_fonts1608[i][j+8]);
	}
}

//显示字符串
void OLED_Show_String(uint8 row, uint8 col, uint8 *ascii_string)
{
	while(*ascii_string != '\0')
	{
		if(col == 128)//防止出现长度大于16的字符串在同一行显示的情况
		{
			col = 0;
			row += 2;
		}
		OLED_Show_Char(row, col, *ascii_string);
		col += 8;
		ascii_string++;
	}
}


//ASCII表可显示字符
//字体大小：8 × 16
unsigned char code oled_fonts1608[][16]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//  0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};

工程Demo及字模软件
链接：https://pan.baidu.com/s/1BS8ml9xkhCwbl_Z74ZrWQw
提取码：p4qy

小明n.n
关注
  • 6
    点赞
  • 踩
  • 53
    收藏
    觉得还不错? 一键收藏
  • 2
    评论
专栏目录
基于STC12C5A60S2系列1T 8051单片机的IIC通信的0.96寸4针OLED12864显示大小写英文的应用
CWQLTYH的博客
05-07 507
main.c#define uchar unsigned char//自定义无符号字符型为uchar#define uint unsigned int//自定义无符号整数型为uintvoid main()//主函数//OLED12864初始化函数while(1)//主循环//从第0小页（即8小行为一小页）开始到第1小页（即8小行为一小页）的第0大列（即8小列为一大列）显示EnglishCharacterArrayOf16Row8Column[][8]变量中的第0个大写字母"A"
OLED_Print(可显示中英文混合字符串).rar
04-18
stm32f103c8t6+OLED，实现OLED_Print函数，可以在OLED屏幕上显示中英文和符号混合的任意字符串，具体看文章https://blog.csdn.net/qq_41790078/article/details/105594835
0.96寸OLED显示屏STC12C5A60S2IIC_例程
08-20
0.96寸OLED显示屏STC12C5A60S2IIC_例程，实机运行通过。
基于51-STC12C5A60S2单片机智能人体心率体温检测OLED设计24-336
最新发布
Danpianjihuizong的博客
06-29 146
24-336、51-STC12C5A60S2人体心率检测系统设计-OLED-心率-DS18B20-BELL-蓝牙-KEY本设计由STC12C5A60S2单片机最小系统电路+0.96寸OLED液晶显示电路+Pulsesensor心率传感器电路+DS18B20温度检测电路+蜂鸣器报警电路+蓝牙模块电路+按键电路+电源电路组成。1、OLED液晶实时显示心率、温度以及心率阈值和温度阈值。2、如果心率或者体温超过其对应的阈值，则蜂鸣器报警，否则蜂鸣器不报警。3、系统将液晶显示的数据通过蓝牙模块实时上传到蓝牙串口助手A
STC8增强型单片机进阶开发--OLED显示器(SPI)
xuewenyu_的博客
06-04 943
例如：随着人工智能的不断发展，机器学习这门技术也越来越重要，很多人都开启了学习机器学习，本文就介绍了机器学习的基础内容。例如：以上就是今天要讲的内容，本文仅仅简单介绍了pandas的使用，而pandas提供了大量能使我们快速便捷地处理数据的函数和方法。
OLED显示字符串(用厂商代码)
weixin_46251230的博客
08-03 1884
在LQ12864.h文件中可以找到OLED的一些使用函数，如初始化、写数据、写命令等函数，可以看到有OLED 设置坐标的函数，显示8*16一组标准ASCII字符串函数，可以拿这两个出来用用。OLED买来后，在商家给的参考资料中找到范例代码，打开51版本的，参考里面现有的代码进一步完善OLED的使用开发。先新建一个头文件OLEDASCII.h来放点阵数据，在codetab.h头文件中找到8*16的点阵，然后复制过来。因为上面使用了显示8*16的函数，所以点阵也用8 * 16的才行。...
0.96寸OLED显示屏显示字符串、汉字（stm32标准库）
qq_50749196的博客
08-09 4468
OLED，即有机发光二极管OLED由于同时具备自发光，不需背光源、对比度高、厚度薄、视角广、反应速度快、可用于挠曲性面板、使用温度范围广、构造及制程较简单等优异之特性，被认为是下一代的平面显示器新兴应用技术。OLED显示其实说白了就是对于像素点的点亮和熄灭进行操作。本文采用的是4针的0.96寸OLED显示进行讲解，采用的是模拟IIC协议，屏幕整体分辨率为128*64驱动芯片为SSD1306，下面是引脚功能介绍。0.96寸OLED屏幕显示引脚介绍名称注释GND电源地VCC电源正（3.3～5V）
从0开始点亮OLED屏幕（三）OLED画点，显示字符、字符串
qq_62637071的博客
04-27 1203
而一个数据有8个点，我们可以利用画点函数去显示出来，即画一个点，y坐标加1，画完一个数据后便让x加1画后续一列的8个像素点，此时应该将y的值从新回到一开始的y值，也就是把y0赋过来。size1/8得此字符所占页数，(size1/2)得字符在x的位数，页数乘x方向位数即得出需要写的次数size2。可以发现第三个形参定义的是一个指针，指向要显示的字符串地址，到时显示完一个字符，地址自增，显示下一个字符，在此之前先判断一下是不是合法的字符(是不是可打印显示字符)，最小为空格32、最大为'~':126。
STM32开发基于SPI接口的OLED数据显示
Liu-FE的博客
12-26 2637
进行对SPI串口的通信的学习，进而用STM32建立工程实现OLED的数据显示
STC单片机0.96OLED显示温湿度
07-12
4. **数据处理与显示**：将获取到的温湿度数据格式化为适合显示的字符串，调用OLED屏幕的显示函数在屏幕上输出。这可能包括设置字体、颜色、坐标等参数。 5. **主循环**：在主程序循环中，定期读取传感器数据并更新...
stc51单片机驱动OLED 屏幕程序
04-24
如果要显示字符串，可以遍历字符串中的每个字符，调用`OLED_ShowChar()`。 此外，还可以实现清除屏幕、移动光标、改变文字颜色等功能。例如，`void OLED_Clear()`清空屏幕，`void OLED_SetCursor(uint8 x, uint8 y)...
ESP8266串口输入字符串，同时用0.96寸OLED显示输出（原创）
07-29
（本程序为原创）本程序用arduino IDE 编程实现从ESP8266 （包含ESP8266d的版本有nodemcu ，esp-12E， esp-12F，miniD1）从串口输入字符串，从0.96寸OLED显示出来，用的是arduinoIDE编程，OLED驱动为SSD1306，可以扩展为很多应用，包括字符串从8266的串口输入，OLED提示输出，等等。OLED驱动为I2c有问题EMAIL：wunnu@qq.com共同学习
OLED 0.96寸 SPI显示方案 全套代码整理 字符显示
12-11
OLED 0.96寸 SPI显示方案 全套代码整理 字符显示 底层驱动，字符显示函数，6*8字符函数，8*16字符函数，自带字库
OLED显示汉字
02-08
STM32F103显示汉字实验，新手教程代码，
STC12C5A60S2+OLED+pid+16*16键盘+PWM+空心杯电机
11-06
STC12C5A60S2主控+OLED显示+pid负反馈调节+16*16键盘输入转速（3000r/min~28000r/min）+PWM调制+空心杯电机转速调节+光电门采集转速（2孔一圈）
STC15W408AS驱动0.96英寸OLED显示屏程序
07-13
亲自测试好用的STC15W408AS驱动0.96英寸OLED显示屏程序，文件包括keil文件，驱动显示屏函数代码分析，和显示屏显示实际效果图片。 文件夹中包含两个代码文件，其中一个《显示图片》为和文件夹中手机显示图片一样，还有一个O1文件为显示0---999加计数程序，以测试个位十位百位在显示屏中显示的效果。
51单片机OLED显示模块程序，IIC协议
04-26
以中景园电子科技的IIC应答...包括ASCII字符显示、字符串显示、数字显示、汉字显示、图片显示等功能。目前在STC15W408AS+0.96寸OLED显示系统测试通过，如需移植请自行修改延时函数和软件模拟IIC用到的那两个IO口定义
STC12C5A60S2单片机A/D采样在OLED做一个简易的电压表
07-23
在这个项目中，我们将讨论如何利用这款单片机实现一个简单的电压表，该电压表通过A/D（模拟/数字）转换器采样输入电压，并在OLED（有机发光二极管）显示屏上实时显示，并通过串口通信将数据发送到外部设备。...
STC单片机+SHT20温湿度传感器 - 串口调试助手显示（模拟IIC）.rar
04-22
STC单片机和SHT20温湿度传感器的结合是物联网和自动化系统中常见的应用。STC单片机是一款基于8051内核的微控制器，以其高性价比、低功耗和丰富的I/O接口而被广泛使用。SHT20则是瑞士Sensirion公司生产的高精度温湿度...
stc15OLED显示温度代码
06-12
以下是一个基于STC15单片机和IIC OLED屏幕的示例代码，用于读取DS18B20温度传感器的值并将其显示在OLED屏幕上： ```c #include #include #include #include #include #include #include "ds18b20.h" // DS18B...
评论 2
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值