rip环境下的MGRE实验

一、实验内容及要求

1. R5为ISP，只能进行IP地址配置；其所有地址均为公有IP地址
2. R1和R5间使用PPP的PAP认证，R5为主认证方；
3. R2与R5之间使用PPP的chap认证，R5为主认证方；
4. R3与R5之间使用HDLC封装。
5. R1/R2/R3构建一个MGRE环境，R1为中心站点；
6. R1、R4间为点到点的GRE。
7. 整个私有网络基于RIP全网可达
8. 所有PC设置私有IP为源IP，可以访问R5环回

 

二、地址配置

//配置公共网络

R1

----r1 的 mgre

• [r1]interface GigabitEthernet 0/0/0
• [r1-GigabitEthernet0/0/0]ip address 192.168.1.3 24
• [r1-GigabitEthernet0/0/0]q
• [r1]interface Serial 2/0/0
• [r1]-Serial2/0/0]ip address 15.0.0.2 8

[r1]ip route-static 0.0.0.0 0 15.0.0.3

--r1 的 gre

• [r1-Tunnel0/0/0]interface Tunnel 0/0/1
• [r1-Tunnel0/0/1]ip address 192.168.6.1 24
• [r1-Tunnel0/0/1]tunnel-protocol gre
• [r1-Tunnel0/0/1]source 15.0.0.2
• [r1-Tunnel0/0/1]destination 45.0.0.2

R2

• [r2]interface GigabitEthernet 0/0/0
• [r2-GigabitEthernet0/0/0]ip address 192.168.2.3 24
• [r2-GigabitEthernet0/0/0]g
• [r2]interface Serial 2/0/0
• [r2-Serial2/0/0]ip ad

[r2-Serial2/0/0]ip address 25.0.0.2 8
[r2]ip route-static 0.0.0.0 0 25.0.0.3

R3

• [r3]interface GigabitEthernet 0/0/0
• [r3-GigabitEthernet0/0/0]ip ad
• [r3-GigabitEthernet0/0/0]ip address 192.168.3.3 24
• [r3-GigabitEthernet0/0/0]q
• [r3]linterface Serial 2/0/0
• [r3]-Serial2/0/0]ip address 35.0.0.2 8

[r3]ip route-static 0.0.0.0 0 35.0.0.3

R4

• [R4]interface GigabitEthernet 0/0/0
• [R4-GigabitEthernet0/0/0]ip address 45.0.0.2 8
• [R4-GigabitEthernet0/0/0]interface GigabitEthernet 0/0/1
• [R4-GigabitEthernet0/0/1]ip address 192.168.4.3 24

[R4]ip route-static 0.0.0.0 0 45.0.0.3

R5

• [ISP]interface Serial 1/0/0
• [ISP-Serial1/0/0]ip address 15.0.0.3 8
• [ISP-Serial1/0/0]interface serial 2/0/0
• [ISP-Serial2/0/0]ip address 25.0.0.3 8
• [ISP-Serial2/0/0]interface Serial 1/0/1
• [ISP-Serial1/0/1]ip address 35.0.0.3 8
• [ISP-Serial1/0/1]q
• [ISP]interface GigabitEthernet 0/0/0
• [ISP-GigabitEthernet0/0/0]ip address 45.0.0.3 8

//配置私网

//中心配置

• [r1]int
• [r1]interface Tunnel 0/0/0
• [r1-Tunnel0/0/0]ip address 192.168.5.1 24
• [r1-Tunnel0/0/0]tunnel-protocol gre p2mp
• [r1-Tunnel0/0/0]source 15.0.0.2
• [r1-Tunnel0/0/0]nhrp network-id 1

//分支配置 msre

• [r2]interface Tunnel 0/0/0
• [r2-Tunnel0/0/0]ip address 192.168.5.2 24
• [r2-Tunnel0/0/0]tunnel-protocol gre p2mp
• [r2-Tunnel0/0/0lsource 25.0.0.2