SPS PDSCH的HARQ反馈

R15 SPS HARQ反馈规则 38.213 9.1

General

UE在同一PUCCH中只期待被指示发送1个SPS PDSCH的HARQ-ACK信息，并且只为该PDSCH生成1bit HARQ-ACK信息。
If a UE receives a PDSCH without receiving a corresponding PDCCH, or if the UE receives a PDCCH indicating a SPS PDSCH release, the UE generates one corresponding HARQ-ACK information bit (only for the TB in the PDSCH). A UE does not expect to be indicated to transmit HARQ-ACK information for more than two SPS PDSCH receptions in a same PUCCH.

Only HARQ-ACK feedback for SPS PDSCHs shall be reported

根据激活DCI中配置的K1值，确定反馈时隙。根据SPS-Config中的n1PUCCH-AN参数确定反馈资源。
n1PUCCH-AN（PUCCH-ResourceId）：HARQ resource for PUCCH for DL SPS. The network configures the resource either as format0 or format1.

SPS HARQ-ACK is multiplexed with dynamic HARQ

对于半静态码本，根据激活DCI中配置的K1值，确定反馈时隙，以及根据反馈时机确定在码本中的位置。若预留的反馈比特数大于1，则UE将对应的HARQ-ACK信息重复多次，直至充满预留比特位。
对于动态码本，SPS HARQ-ACK比特被添加在码本尾部，多个小区的反馈信息按照serving cell index的升序排列。

R16 agreement for SPS HARQ feedback

Only HARQ-ACK feedback for SPS PDSCHs shall be reported

对于只有SPS HARQ-ACK进行反馈的情况：
与R15相比，为支持多SPS配置，R16支持更多比特的反馈，也因此支持PF2/3/4。通过RRC为所有SPS配置共同配置了至多4个PUCCH资源，且每个资源所能承载的载荷大小依次升高。UE基于HARQ-ACK有效载荷大小来确定要使用的实际PUCCH资源。多个SPS配置的反馈码本按照DL slot, SPS configuration index, serving cell index的升序排列。

• Support more than one bit of HARQ-ACK feedback for SPS PDSCH without an associated grant in a PUCCH resource
• PUCCH formats 2/3/4 are applicable in addition to PUCCH formats 0/1.
• Multiple PUCCH resources are configured common for all SPS configurations per HARQ-ACK codebook. The actual PUCCH resource to be used among PUCCH resources is determined based on HARQ-ACK payload size
  • Number of PUCCH resources is up to 4
  • FFS details (e.g., threshold for determining PUCCH resource)
• PUCCH resource i is selected if HARQ-ACK pa