使用kubeadm部署Kubernetes 1.26

最新推荐文章于 2024-04-26 22:37:54 发布

HiSiri~

最新推荐文章于 2024-04-26 22:37:54 发布

阅读量595

点赞数 1

文章标签： kubernetes 运维 docker

本文链接：https://blog.csdn.net/m0_51691302/article/details/129087770

版权

使用kubeadm部署Kubernetes 1.26

参考

Installing kubeadm
Creating a cluster with kubeadm
https://github.com/containerd/containerd
https://pkg.go.dev/k8s.io/kubernetes/cmd/kubeadm/app/apis/kubeadm/v1beta2
https://docs.projectcalico.org/

1.准备

1.1 系统配置

在安装之前，需要先做好如下准备。3台CentOS 7.9主机如下：

cat /etc/hosts
192.168.96.151    node1
192.168.96.152    node2
192.168.96.153    node3

在各个主机上完成下面的系统配置。

如果各个主机启用了防火墙策略，需要开放Kubernetes各个组件所需要的端口，可以查看Ports and Protocols中的内容, 开放相关端口或者关闭主机的防火墙。

禁用SELINUX：

setenforce 0

vi /etc/selinux/config
SELINUX=disabled

创建/etc/modules-load.d/containerd.conf配置文件:

cat << EOF > /etc/modules-load.d/containerd.conf
overlay
br_netfilter
EOF

执行以下命令使配置生效:

modprobe overlay
modprobe br_netfilter

创建/etc/sysctl.d/99-kubernetes-cri.conf配置文件：

cat << EOF > /etc/sysctl.d/99-kubernetes-cri.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
user.max_user_namespaces=28633
EOF

执行以下命令使配置生效:

sysctl -p /etc/sysctl.d/99-kubernetes-cri.conf

1.2 配置服务器支持开启ipvs的前提条件

由于ipvs已经加入到了内核的主干，所以为kube-proxy开启ipvs的前提需要加载以下的内核模块：

ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack_ipv4

在各个服务器节点上执行以下脚本:

cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF
chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4

上面脚本创建了的/etc/sysconfig/modules/ipvs.modules文件，保证在节点重启后能自动加载所需模块。使用lsmod | grep -e ip_vs -e nf_conntrack_ipv4命令查看是否已经正确加载所需的内核模块。

接下来还需要确保各个节点上已经安装了ipset软件包，为了便于查看ipvs的代理规则，最好安装一下管理工具ipvsadm。

yum install -y ipset ipvsadm

如果不满足以上前提条件，则即使kube-proxy的配置开启了ipvs模式，也会退回到iptables模式。

1.3 部署容器运行时Containerd

在各个服务器节点上安装容器运行时Containerd。

下载Containerd的二进制包:

wget https://github.com/containerd/containerd/releases/download/v1.6.14/cri-containerd-cni-1.6.14-linux-amd64.tar.gz

cri-containerd-cni-1.6.14-linux-amd64.tar.gz压缩包中已经按照官方二进制部署推荐的目录结构布局好。里面包含了systemd配置文件，containerd以及cni的部署文件。将解压缩到系统的根目录/中:

tar -zxvf cri-containerd-cni-1.6.14-linux-amd64.tar.gz -C /

etc/
etc/cni/
etc/cni/net.d/
etc/cni/net.d/10-containerd-net.conflist
etc/systemd/
etc/systemd/system/
etc/systemd/system/containerd.service
etc/crictl.yaml
usr/
usr/local/
usr/local/sbin/
usr/local/sbin/runc
usr/local/bin/
usr/local/bin/containerd-stress
usr/local/bin/containerd-shim
usr/local/bin/containerd-shim-runc-v1
usr/local/bin/crictl
usr/local/bin/critest
usr/local/bin/containerd-shim-runc-v2
usr/local/bin/ctd-decoder
usr/local/bin/containerd
usr/local/bin/ctr
opt/
opt/cni/
opt/cni/bin/
opt/cni/bin/ptp
opt/cni/bin/bandwidth
opt/cni/bin/static
opt/cni/bin/dhcp
...
opt/containerd/
opt/containerd/cluster/
...

注意经测试cri-containerd-cni-1.6.4-linux-amd64.tar.gz包中包含的runc在CentOS 7下的动态链接有问题，这里从runc的github上单独下载runc，并替换上面安装的containerd中的runc:

wget https://github.com/opencontainers/runc/releases/download/v1.1.2/runc.amd64

接下来生成containerd的配置文件:

mkdir -p /etc/containerd
containerd config default > /etc/containerd/config.toml

根据文档Container runtimes 中的内容，对于使用systemd作为init system的Linux的发行版，使用systemd作为容器的cgroup driver可以确保服务器节点在资源紧张的情况更加稳定，因此这里配置各个节点上containerd的cgroup driver为systemd。

修改前面生成的配置文件/etc/containerd/config.toml：

[plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc]
  ...
  [plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc.options]
    SystemdCgroup = true

再修改/etc/containerd/config.toml中的

[plugins."io.containerd.grpc.v1.cri"]
  ...
  # sandbox_image = "k8s.gcr.io/pause:3.6"
  sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.9"

配置containerd开机启动，并启动containerd

systemctl enable containerd --now

使用crictl测试一下，确保可以打印出版本信息并且没有错误信息输出:

crictl version

Version:  0.1.0
RuntimeName:  containerd
RuntimeVersion:  v1.6.14
RuntimeApiVersion:  v1

2.使用kubeadm部署Kubernetes

2.1 安装kubeadm和kubelet

下面在各节点安装kubeadm和kubelet：

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
        http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

yum makecache fast
yum install kubelet kubeadm kubectl

运行kubelet --help可以看到原来kubelet的绝大多数命令行flag参数都被DEPRECATED了，官方推荐我们使用--config指定配置文件，并在配置文件中指定原来这些flag所配置的内容。具体内容可以查看这里Set Kubelet parameters via a config file。最初Kubernetes这么做是为了支持动态Kubelet配置（Dynamic Kubelet Configuration），但动态Kubelet配置特性从k8s 1.22中已弃用，并在1.24中被移除。如果需要调整集群汇总所有节点kubelet的配置，还是推荐使用ansible等工具将配置分发到各个节点。

kubelet的配置文件必须是json或yaml格式，具体可查看这里。

Kubernetes 1.8开始要求关闭系统的Swap，如果不关闭，默认配置下kubelet将无法启动。关闭系统的Swap方法如下:

swapoff -a

修改/etc/fstab文件，注释掉 SWAP 的自动挂载，使用free -m确认swap已经关闭。

swappiness参数调整，修改/etc/sysctl.d/99-kubernetes-cri.conf添加下面一行：

vm.swappiness=0

执行sysctl -p /etc/sysctl.d/99-kubernetes-cri.conf使修改生效。

2.2 使用kubeadm init初始化集群

在各节点开机启动kubelet服务：

systemctl enable kubelet.service

使用kubeadm config print init-defaults --component-configs KubeletConfiguration可以打印集群初始化默认的使用的配置：

apiVersion: kubeadm.k8s.io/v1beta3
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 1.2.3.4
  bindPort: 6443
nodeRegistration:
  criSocket: unix:///var/run/containerd/containerd.sock
  imagePullPolicy: IfNotPresent
  name: node
  taints: null
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta3
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controllerManager: {}
dns: {}
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.k8s.io
kind: ClusterConfiguration
kubernetesVersion: 1.26.0
networking:
  dnsDomain: cluster.local
  serviceSubnet: 10.96.0.0/12
scheduler: {}
---
apiVersion: kubelet.config.k8s.io/v1beta1
authentication:
  anonymous:
    enabled: false
  webhook:
    cacheTTL: 0s
    enabled: true
  x509:
    clientCAFile: /etc/kubernetes/pki/ca.crt
authorization:
  mode: Webhook
  webhook:
    cacheAuthorizedTTL: 0s
    cacheUnauthorizedTTL: 0s
cgroupDriver: systemd
clusterDNS:
- 10.96.0.10
clusterDomain: cluster.local
cpuManagerReconcilePeriod: 0s
evictionPressureTransitionPeriod: 0s
fileCheckFrequency: 0s
healthzBindAddress: 127.0.0.1
healthzPort: 10248
httpCheckFrequency: 0s
imageMinimumGCAge: 0s
kind: KubeletConfiguration
logging:
  flushFrequency: 0
  options:
    json:
      infoBufferSize: "0"
  verbosity: 0
memorySwap: {}
nodeStatusReportFrequency: 0s
nodeStatusUpdateFrequency: 0s
rotateCertificates: true
runtimeRequestTimeout: 0s
shutdownGracePeriod: 0s
shutdownGracePeriodCriticalPods: 0s
staticPodPath: /etc/kubernetes/manifests
streamingConnectionIdleTimeout: 0s
syncFrequency: 0s
volumeStatsAggPeriod: 0s

从默认的配置中可以看到，可以使用imageRepository定制在集群初始化时拉取k8s所需镜像的地址。基于默认配置定制出本次使用kubeadm初始化集群所需的配置文件kubeadm.yaml：

apiVersion: kubeadm.k8s.io/v1beta3
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 192.168.96.151
  bindPort: 6443
nodeRegistration:
  criSocket: unix:///run/containerd/containerd.sock
  taints:
  - effect: PreferNoSchedule
    key: node-role.kubernetes.io/master
---
apiVersion: kubeadm.k8s.io/v1beta2
kind: ClusterConfiguration
kubernetesVersion: 1.26.0
imageRepository: registry.aliyuncs.com/google_containers
networking:
  podSubnet: 10.244.0.0/16
---
apiVersion: kubelet.config.k8s.io/v1beta1
kind: KubeletConfiguration
cgroupDriver: systemd
failSwapOn: false
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: ipvs

这里定制了imageRepository为阿里云的registry，避免因gcr被墙，无法直接拉取镜像。criSocket设置了容器运行时为containerd。同时设置kubelet的cgroupDriver为systemd，设置kube-proxy代理模式为ipvs。

在开始初始化集群之前可以使用kubeadm config images pull --config kubeadm.yaml预先在各个服务器节点上拉取所k8s需要的容器镜像。

kubeadm config images pull --config kubeadm.yaml
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-apiserver:v1.26.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-controller-manager:v1.26.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-scheduler:v1.26.0
[config/images] Pulled registry.aliyuncs.com/google_containers/kube-proxy:v1.26.0
[config/images] Pulled registry.aliyuncs.com/google_containers/pause:3.9
[config/images] Pulled registry.aliyuncs.com/google_containers/etcd:3.5.6-0
[config/images] Pulled registry.aliyuncs.com/google_containers/coredns:v1.9.3

接下来使用kubeadm初始化集群，选择node1作为Master Node，在node1上执行下面的命令：

kubeadm init --config kubeadm.yaml

W0104 16:55:08.531622   29428 common.go:84] your configuration file uses a deprecated API spec: "kubeadm.k8s.io/v1beta2". Please use 'kubeadm config migrate --old-config old.yaml --new-config new.yaml', which will write the new, similar spec using a newer API version.
[init] Using Kubernetes version: v1.26.0
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Using existing ca certificate authority
[certs] Using existing apiserver certificate and key on disk
[certs] Using existing apiserver-kubelet-client certificate and key on disk
[certs] Using existing front-proxy-ca certificate authority
[certs] Using existing front-proxy-client certificate and key on disk
[certs] Using existing etcd/ca certificate authority
[certs] Using existing etcd/server certificate and key on disk
[certs] Using existing etcd/peer certificate and key on disk
[certs] Using existing etcd/healthcheck-client certificate and key on disk
[certs] Using existing apiserver-etcd-client certificate and key on disk
[certs] Using the existing "sa" key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Using existing kubeconfig file: "/etc/kubernetes/admin.conf"
[kubeconfig] Using existing kubeconfig file: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Using existing kubeconfig file: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Using existing kubeconfig file: "/etc/kubernetes/scheduler.conf"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 9.503362 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node node1 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node node1 as control-plane by adding the taints [node-role.kubernetes.io/master:PreferNoSchedule]
[bootstrap-token] Using token: o4pn35.3zjs1udp6uw1eg8w
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.96.151:6443 --token o4pn35.3zjs1udp6uw1eg8w \
	--discovery-token-ca-cert-hash sha256:9db5dbc8e0c6d8f399fad5afbac4a169a6a253eae23d24cb3edbd8d7ac0877a9

上面记录了完成的初始化输出的内容，根据输出的内容基本上可以看出手动初始化安装一个Kubernetes集群所需要的关键步骤。其中有以下关键内容：

[certs]生成相关的各种证书
[kubeconfig]生成相关的kubeconfig文件
[kubelet-start] 生成kubelet的配置文件"/var/lib/kubelet/config.yaml"
[control-plane]使用/etc/kubernetes/manifests目录中的yaml文件创建apiserver、controller-manager、scheduler的静态pod
[bootstraptoken]生成token记录下来，后边使用kubeadm join往集群中添加节点时会用到
[addons]安装基本插件:CoreDNS, kube-proxy
下面的命令是配置常规用户如何使用kubectl访问集群：

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

最后给出了将另外2个节点加入集群的命令

kubeadm join 192.168.96.151:6443 --token o4pn35.3zjs1udp6uw1eg8w \
	--discovery-token-ca-cert-hash sha256:9db5dbc8e0c6d8f399fad5afbac4a169a6a253eae23d24cb3edbd8d7ac0877a9

查看一下集群状态，确认个组件都处于healthy状态：

kubectl get cs

Warning: v1 ComponentStatus is deprecated in v1.19+
NAME                 STATUS    MESSAGE                         ERROR
controller-manager   Healthy   ok
scheduler            Healthy   ok
etcd-0               Healthy   {"health":"true","reason":""}

集群初始化如果遇到问题，可以使用kubeadm reset命令进行清理。

2.3 安装包管理器helm 3

Helm是Kubernetes的包管理器，后续流程也将使用Helm安装Kubernetes的常用组件。这里先在master节点node1上安装helm。

wget https://get.helm.sh/helm-v3.10.3-linux-amd64.tar.gz
tar -zxvf helm-v3.10.3-linux-amd64.tar.gz
mv linux-amd64/helm  /usr/local/bin/

执行helm list确认没有错误输出。

2.4 部署Pod Network组件Calico

选择calico作为k8s的Pod网络组件，下面使用helm在k8s集群中安装calico。

下载tigera-operator的helm chart:

wget https://github.com/projectcalico/calico/releases/download/v3.24.5/tigera-operator-v3.24.5.tgz

查看这个chart的中可定制的配置:

helm show values tigera-operator-v3.24.5.tgz

imagePullSecrets: {}

installation:
  enabled: true
  kubernetesProvider: ""

apiServer:
  enabled: true

certs:
  node:
    key:
    cert:
    commonName:
  typha:
    key:
    cert:
    commonName:
    caBundle:

# Resource requests and limits for the tigera/operator pod.
resources: {}

# Tolerations for the tigera/operator pod.
tolerations:
- effect: NoExecute
  operator: Exists
- effect: NoSchedule
  operator: Exists

# NodeSelector for the tigera/operator pod.
nodeSelector:
  kubernetes.io/os: linux

# Custom annotations for the tigera/operator pod.
podAnnotations: {}

# Custom labels for the tigera/operator pod.
podLabels: {}

# Image and registry configuration for the tigera/operator pod.
tigeraOperator:
  image: tigera/operator
  version: v1.28.5
  registry: quay.io
calicoctl:
  image: docker.io/calico/ctl
  tag: v3.24.5

定制的values.yaml如下:

# 可针对上面的配置进行定制,例如calico的镜像改成从私有库拉取。
# 这里只是个人本地环境测试k8s新版本，这里只有下面几行配置
apiServer:
  enabled: false

使用helm安装calico：

helm install calico tigera-operator-v3.24.5.tgz -n kube-system  --create-namespace -f values.yaml

等待并确认所有pod处于Running状态:

kubectl get pod -n kube-system | grep tigera-operator
tigera-operator-5fb55776df-wxbph   1/1     Running   0             5m10s

kubectl get pods -n calico-system
NAME                                       READY   STATUS    RESTARTS   AGE
calico-kube-controllers-68884f975d-5d7p9   1/1     Running   0          5m24s
calico-node-twbdh                          1/1     Running   0          5m24s
calico-typha-7b4bdd99c5-ssdn2              1/1     Running   0          5m24s

查看一下calico向k8s中添加的api资源:

kubectl api-resources | grep calico
bgpconfigurations                              crd.projectcalico.org/v1               false        BGPConfiguration
bgppeers                                       crd.projectcalico.org/v1               false        BGPPeer
blockaffinities                                crd.projectcalico.org/v1               false        BlockAffinity
caliconodestatuses                             crd.projectcalico.org/v1               false        CalicoNodeStatus
clusterinformations                            crd.projectcalico.org/v1               false        ClusterInformation
felixconfigurations                            crd.projectcalico.org/v1               false        FelixConfiguration
globalnetworkpolicies                          crd.projectcalico.org/v1               false        GlobalNetworkPolicy
globalnetworksets                              crd.projectcalico.org/v1               false        GlobalNetworkSet
hostendpoints                                  crd.projectcalico.org/v1               false        HostEndpoint
ipamblocks                                     crd.projectcalico.org/v1               false        IPAMBlock
ipamconfigs                                    crd.projectcalico.org/v1               false        IPAMConfig
ipamhandles                                    crd.projectcalico.org/v1               false        IPAMHandle
ippools                                        crd.projectcalico.org/v1               false        IPPool
ipreservations                                 crd.projectcalico.org/v1               false        IPReservation
kubecontrollersconfigurations                  crd.projectcalico.org/v1               false        KubeControllersConfiguration
networkpolicies                                crd.projectcalico.org/v1               true         NetworkPolicy
networksets                                    crd.projectcalico.org/v1               true         NetworkSet

这些api资源是属于calico的，因此不建议使用kubectl来管理，推荐按照calicoctl来管理这些api资源。将calicoctl安装为kubectl的插件:

cd /usr/local/bin
curl -o kubectl-calico -O -L  "https://github.com/projectcalico/calicoctl/releases/download/v3.21.5/calicoctl-linux-amd64" 
chmod +x kubectl-calico

验证插件正常工作:

kubectl calico -h

2.5 验证k8s DNS是否可用

kubectl run curl --image=radial/busyboxplus:curl -it
If you don't see a command prompt, try pressing enter.
[ root@curl:/ ]$

进入后执行nslookup kubernetes.default确认解析正常:

nslookup kubernetes.default
Server:    10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local

Name:      kubernetes.default
Address 1: 10.96.0.1 kubernetes.default.svc.cluster.local

2.6 向Kubernetes集群中添加Node节点

下面将node2, node3添加到Kubernetes集群中，分别在node2, node3上执行:

kubeadm join 192.168.96.151:6443 --token o4pn35.3zjs1udp6uw1eg8w \
	--discovery-token-ca-cert-hash sha256:9db5dbc8e0c6d8f399fad5afbac4a169a6a253eae23d24cb3edbd8d7ac0877a9

node2和node3加入集群很是顺利，在master节点上执行命令查看集群中的节点：

kubectl get node
NAME    STATUS   ROLES           AGE   VERSION
node1   Ready    control-plane   29m   v1.26.0
node2   Ready    <none>          31s   v1.26.0
node3   Ready    <none>          19s   v1.26.0

3.Kubernetes常用组件部署

3.1 使用Helm部署ingress-nginx

为了便于将集群中的服务暴露到集群外部，需要使用Ingress。接下来使用Helm将ingress-nginx部署到Kubernetes上。 Nginx Ingress Controller被部署在Kubernetes的边缘节点上。

这里将node1(192.168.96.151)作为边缘节点，打上Label：

kubectl label node node1 node-role.kubernetes.io/edge=

下载ingress-nginx的helm chart:

wget https://github.com/kubernetes/ingress-nginx/releases/download/helm-chart-4.4.2/ingress-nginx-4.4.2.tgz

查看ingress-nginx-4.4.2.tgz这个chart的可定制配置:

helm show values ingress-nginx-4.4.2.tgz

对values.yaml配置定制如下:

controller:
  ingressClassResource:
    name: nginx
    enabled: true
    default: true
    controllerValue: "k8s.io/ingress-nginx"
  admissionWebhooks:
    enabled: false
  replicaCount: 1
  image:
    # registry: registry.k8s.io
    # image: ingress-nginx/controller
    # tag: "v1.5.1"
    registry: docker.io
    image: unreachableg/registry.k8s.io_ingress-nginx_controller
    tag: "v1.5.1"
    digest: sha256:97fa1ff828554ff4ee1b0416e54ae2238b27d1faa6d314d5a94a92f1f99cf767
  hostNetwork: true
  nodeSelector:
    node-role.kubernetes.io/edge: ''
  affinity:
    podAntiAffinity:
        requiredDuringSchedulingIgnoredDuringExecution:
        - labelSelector:
            matchExpressions:
            - key: app
              operator: In
              values:
              - nginx-ingress
            - key: component
              operator: In
              values:
              - controller
          topologyKey: kubernetes.io/hostname
  tolerations:
      - key: node-role.kubernetes.io/master
        operator: Exists
        effect: NoSchedule
      - key: node-role.kubernetes.io/master
        operator: Exists
        effect: PreferNoSchedule

nginx ingress controller的副本数replicaCount为1，将被调度到node1这个边缘节点上。这里并没有指定nginx ingress controller service的externalIPs，而是通过hostNetwork: true设置nginx ingress controller使用宿主机网络。因为k8s.gcr.io被墙，这里替换成unreachableg/registry.k8s.io_ingress-nginx_controller提前拉取一下镜像:

crictl pull unreachableg/registry.k8s.io_ingress-nginx_controller:v1.5.1

helm install ingress-nginx ingress-nginx-4.4.2.tgz --create-namespace -n ingress-nginx -f values.yaml

kubectl get pod -n ingress-nginx
NAME                                       READY   STATUS    RESTARTS   AGE
ingress-nginx-controller-7c96f857f-cbmhx   1/1     Running   0          39s

测试访问http://192.168.96.151返回默认的nginx 404页，则部署完成。

3.2 使用Helm部署dashboard

先部署metrics-server：

wget https://github.com/kubernetes-sigs/metrics-server/releases/download/metrics-server-helm-chart-3.8.3/components.yaml

修改components.yaml中的image为docker.io/unreachableg/k8s.gcr.io_metrics-server_metrics-server:v0.6.2。修改components.yaml中容器的启动参数，加入--kubelet-insecure-tls。

kubectl apply -f components.yaml

metrics-server的pod正常启动后，等一段时间就可以使用kubectl top查看集群和pod的metrics信息:

kubectl top node
NAME    CPU(cores)   CPU%   MEMORY(bytes)   MEMORY%
node1   509m         12%    3654Mi          47%
node2   133m         3%     1786Mi          23%
node3   117m         2%     1810Mi          23%

kubectl top pod -n kube-system
NAME                               CPU(cores)   MEMORY(bytes)
coredns-74586cf9b6-575nl           6m           16Mi
coredns-74586cf9b6-mbn8s           5m           17Mi
etcd-node1                         49m          91Mi
kube-apiserver-node1               142m         490Mi
kube-controller-manager-node1      38m          54Mi
kube-proxy-k5lzs                   26m          19Mi
kube-proxy-rb5pf                   9m           15Mi
kube-proxy-w5zpk                   27m          16Mi
kube-scheduler-node1               7m           18Mi
metrics-server-8dfd488f5-r8pbh     8m           21Mi
tigera-operator-5fb55776df-wxbph   10m          38Mi

接下来使用helm部署k8s的dashboard，添加chart repo:

helm repo add kubernetes-dashboard https://kubernetes.github.io/dashboard/
helm repo update

查看chart的可定制配置:

helm show values kubernetes-dashboard/kubernetes-dashboard

对values.yaml定制配置如下:

image:
  repository: kubernetesui/dashboard
  tag: v2.7.0
ingress:
  enabled: true
  annotations:
    nginx.ingress.kubernetes.io/ssl-redirect: "true"
    nginx.ingress.kubernetes.io/backend-protocol: "HTTPS"
  hosts:
  - k8s.example.com
  tls:
    - secretName: example-com-tls-secret
      hosts:
      - k8s.example.com
metricsScraper:
  enabled: true

以上配置中, 部署的dashboard将通过ingress以域名k8s.example.com暴露出来, 并为此域名开启HTTPS。

为了开启HTTPS，需要为此域名申请SSL证书或使用自签证书，这里使用的证书和私钥文件分别为cert.pem和key.pem。生成私钥文件：

csharpCopy code
openssl genrsa -out key.pem 2048

其中，key.pem 是生成的私钥文件的文件名，2048 是指定的密钥长度。

生成证书文件：

csharpCopy codeopenssl req -new -key key.pem -out mycsr.csr
openssl x509 -req -in mycsr.csr -signkey key.pem -out cert.pem

其中，mycsr.csr 是证书签名请求文件，cert.pem 是生成的证书文件。

在以上命令中，-key 选项用于指定要用于证书签名的私钥文件，-req 选项用于生成证书签名请求文件，-signkey 选项用于将证书签名请求和私钥结合生成证书文件。在生成证书文件时，还可以指定证书有效期、主题等信息，具体可以参考 OpenSSL 的文档和命令选项。

先创建存放k8s.example.comssl证书的secret:

kubectl create secret tls example-com-tls-secret \
  --cert=cert.pem \
  --key=key.pem \
  -n kube-system

使用helm部署dashboard:

helm install kubernetes-dashboard kubernetes-dashboard/kubernetes-dashboard \
-n kube-system \
-f values.yaml

确认上面的命令部署成功。修改svc类型ClusterIP为 NodePort

kubectl edit svc kubernetes-dashboard -n kube-system

创建管理员sa:

kubectl create serviceaccount kube-dashboard-admin-sa -n kube-system

kubectl create clusterrolebinding kube-dashboard-admin-sa \
--clusterrole=cluster-admin --serviceaccount=kube-system:kube-dashboard-admin-sa

创建集群管理员登录dashboard所需token:

kubectl describe secrets -n kube-system $(kubectl -n kube-system get secret | awk '/dashboard-admin/{print $1}')

使用上面的token登录k8s dashboard。

Snipaste_2023-02-17_14-56-11

HiSiri~

关注

1
点赞
踩
2

收藏

觉得还不错? 一键收藏
2
评论
使用kubeadm部署Kubernetes 1.26

kubeadm是Kubernetes官方提供的用于快速安部署Kubernetes集群的工具，伴随Kubernetes每个版本的发布都会同步更新，kubeadm会对集群配置方面的一些实践做调整，通过实验kubeadm可以学习到Kubernetes官方在集群配置上一些新的最佳实践。
复制链接

扫一扫