NGW二级行星齿轮减速机设计【9张CAD图纸+14000多字说明书】

本文详细阐述了一种NGW行星减速器的设计过程,该减速器特点是结构紧凑、效率高,适用于化工、机器人等领域。设计中采用了齿式浮动机构实现负载均衡,法兰式箱体和分离式内齿圈以增强结构稳定性。通过对齿轮、轴、行星架和箱体的计算与强度校核,确保了减速器的性能。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

NGW行星减速器设计

摘 要

本文完成了行星齿轮减速机的结构设计。该减速机具有较小的传动比,而且,它具有结构紧凑、传动效率高、外廓尺寸小和重量轻、承载能力大、运动平稳、抗冲击和震动的能力较强、噪声低的特点,适用于化工、轻工业以及机器人等领域。这些功用对于现代机械传动的发展有着较重要的意义。

首先简要介绍了课题的背景以及齿轮减速机的研究现状和发展趋势,然后比较了各种传动结构,从而确定了传动的基本类型。论文主体部分是对传动机构主要构件包括太阳轮、行星轮、内齿圈及行星架的设计计算,通过所给的输入功率、传动比、输入转速以及工况系数确定齿轮减速机的大致结构之后,对其进行了整体结构的设计计算和主要零部件的强度校核计算。其中该减速机的设计与其他减速机的结构设计相比有三大特点:其一,为了使三个行星轮的载荷均匀分配,采用了齿式浮动机构,即太阳轮与高速轴通过齿式联轴器将二者连接在一起,从而实现了太阳轮的浮动;其二,该减速机的箱体采用的是法兰式箱体,上下箱体分别铸造而成;其三,内齿圈与箱体采用分离式,通过螺栓和圆锥销将其与上下箱体固定在一起。最后对整个设计过程进行了总结,基本上完成了对该减速机的整体结构设计。

关键词:行星齿轮,传动机构,结构设计,校核计算


 

ABSTRACT

This completed a single-stage planetary gear reducer design. The gear has a smaller transmission ratio, and it has a compact, high transmission efficiency, outline, small size and light weight, carrying capacity, smooth motion, shock and vibration resistant and low noise characteristics, Used in chemical, light industry and robotics fields. The function of the development of modern mechanical transmission has a more important significance.

First paper introduces the background and the subject of gear reducer situation and development trend, and then compared various transmission structures, which determine the basic type of transmission. Thesis is the main part of the main components of drive mechanism including the sun wheel, planet gear, ring gear and planet carrier in the design calculation, given by the input power, gear ratio, input speed and the condition factor to determine the approximate structure after the gear reducer And to carry out the design and calculation of the overall structure and main components of the strength check calculation. One of the other gear reducer design and compared the structural design of the three major characteristics: First, the three planetary gear to make the load evenly, using a gear-type floating body, the sun gear and high-speed shaft through the gear together Coupling the two together to achieve a floating sun gear; Second, the box uses a reducer flange box, upper and lower box were cast; Third, the ring gear and Box with separate, through bolts and tapered pins will be fixed together with the upper and lower box. Finally, a summary of the entire design process is basically complete the overall design of the reducer.

KEY WORDS: planetary gear,driving machanism,structural design,checking calculation

目 录

前 言

第1章 传动方案的确定

1.1 设计任务

1.1.1 齿轮传动的特点

1.1.2 齿轮传动的两大类型

1.2行星机构的类型选择

1.2.1 行星机构的类型及特点

1.2.2 确定行星齿轮传动类型

第2章 齿轮的设计计算

2.1 配齿计算

2.1.1 确定各齿轮的齿数

2.1.2 初算中心距和模数

2.2 几何尺寸计算

2.3 装配条件验算

2.3.1 邻接条件

2.3.2 同心条件

2.3.2 安装条件

2.4 齿轮强度校核

2.4.1 a-c传动强度校核

2.4.1 c-b传动强度校核

第3章 轴的设计计算

3.1 行星轴设计

3.2 转轴的设计

3.2.1 输入轴设计

3.2.2 输出轴设计

第4章 行星架和箱体的设计

4.1 行星架的设计

4.1.1 行星架结构方案

4.1.2 行星架制造精度

4.2 箱体的设计

结 论

致谢

参考文献

…………

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值