C# Solidworks二次开发：枚举应用实战（第八讲）

大家好，今天还要介绍我们的枚举应用实战系列。

下面是今天要介绍的枚举值：

（1）第一个为swCommands_e，这个枚举的含义为sw工具栏和菜单命令，下面是官方的具体枚举值：

Member	Description
swCommand_Border_Editor	3156; valid only for drawings in Edit Sheet Format mode (run swCommands_e.swCommands_Edit_Template before running this command); Sheet Format toolbar > Automatic Border
swCommand_Cartoon_Shading	3170; valid only for assemblies and parts; View toolbar > View Settings > Cartoon
swCommand_ChildReferenceArrow	3152; valid only for assemblies; Assembly toolbar > Dynamic Reference Visualization (Child)
swCommand_Component_Preview_Window	3171; valid only for assemblies; Assembly toolbar > Component Preview Window
swCommand_Delete_Selected_BE	3158; valid only for drawings in Edit Sheet Format mode while the Automatic Border PropertyManager page is open; selects all items in Delete List
swCommand_Deselect_All_Selected_BE	3160; valid only for drawings in Edit Sheet Format mode while the Automatic Border PropertyManager page is open; deselects all selections in Delete List
swCommand_Hide_Show_Primary_Planes	3169; valid only for parts; View toolbar > Hide / Show Primary Planes
swCommand_ReferenceArrow_PopUp	3151; valid only for assemblies; Assembly toolbar > Dynamic Reference Visualization (Parent)
swCommand_Restore_Selected_BE	3159; valid only for drawings in Edit Sheet Format mode while the Automatic Border PropertyManager page is open; restores the selected items in Delete List
swCommand_Sheet_Format	3155; valid only for drawings; View menu > Toolbars > Sheet Format
swCommand_TemporaryFixGroup	3162; valid only for assemblies; Assembly toolbar > Temporary Fix/Group
swCommands_2DTo3D	509; alternative to swCommands_Toolbar_2dto3d; View menu > Toolbars > 2D to 3D
swCommands_2DTo3DCut	394; valid only for parts with a single 2D sketch in edit mode; 2D to 3D toolbar > Convert to Cut
swCommands_2DTo3DMakeRefsketchBack	378; valid only for parts with a single 2D sketch in edit mode; 2D to 3D toolbar > Add to Back Sketch
swCommands_2DTo3DMakeRefsketchBottom	376; valid only for parts with a single 2D sketch in edit mode; 2D to 3D toolbar > Add to Bottom Sketch
swCommands_2DTo3DMakeRefsketchFront	373; valid only for parts with a single 2D sketch in edit mode; 2D to 3D toolbar > Add to Front Sketch
swCommands_2DTo3DMakeRefsketchLeft	377; valid only for parts with a 2D sketch in edit mode; 2D to 3D toolbar > Add to Left Sketch
swCommands_2DTo3DMakeRefsketchRight	375; valid only for parts with a 2D sketch in edit mode; 2D to 3D toolbar > Add to Right Sketch
swCommands_2DTo3DMakeRefsketchTop	374; valid only for parts with a 2D sketch in edit mode; 2D to 3D toolbar > Add to Top Sketch
swCommands_3DDrawingView	548; valid only for drawings; View toolbar > 3D Drawing View
swCommands_3dExperienceDesignEngineer	3288; launches 3DEXPERIENCE from SOLIDWORKS Simulation; Tools toolbar > 3DEXPERIENCE Simulation Connector
swCommands_3DPDF_ADD_ALL_3DVIEWS	3401; MBD toolbar > Publish to 3D PDF > Include Primary Views > Select all views
swCommands_3dpmi	3212; opens the 3D PMI Compare PropertyManager page; Tools menu > 3D PMI Compare Wizard
swCommands_3dPrintValidation	3191; opens the 3-D Print Validation PropertyManager page; View toolbar > 3D Print Validation
swCommands_3DSketch	89; Sketch toolbar > 3D Sketch
swCommands_3DSketchOnPlane	567; valid only for pre-selected planes; Sketch toolbar  > 3D Sketch On Plane
swCommands_3dTexturizeSolidSurface	3333; converts solid and surface bodies to texturized graphics bodies; Features toolbar > Texturize Bodies
swCommands_3PointArc	80; Sketch toolbar > 3 Point Arc
swCommands_Activate_And_Orient_Annotation_View	2230; valid only for inactive annotation views that are oriented; in the FeatureManager design tree, Annotations > annotation_view RMB menu > Activate and Reorient
swCommands_Activate_Annotation_View	2213; in the FeatureManager design tree, Annotations > annotation_view RMB menu > Activate
swCommands_Activate_Doc_Or_Journal	2059; in the FeatureManager design tree, Design Binder  > doc_name RMB menu > Open
swCommands_Activate_Sheet	1206; valid for a selected drawing sheet that is not activated, current, or in edit mode; in the FeatureManager design tree, sheet RMB menu > Activate
swCommands_ActivateFlexiblePartComp	3418; Assembly toolbar > Make Part Flexible
swCommands_Add_Bends	2290; valid for SOLIDWORKS Electrical add-in and an open assembly with a selected route junction point, opens the Add Bends PropertyManager page; Electrical toolbar > Add Bends
swCommands_Add_Comment	2062; in the FeatureManager design tree, component_feature_or_sheet RMB menu > Comment > Add Comment
swCommands_Add_Configuration	1534; in the ConfigurationManager, configuration_name RMB menu > Add Configuration or Add Derived Configuration
swCommands_Add_Constraint_Alongx	2204; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Along X; when the Line Properties PropertyManager page is open for a selected line in the graphics area, sel_line RMB context menu > Make AlongX
swCommands_Add_Constraint_Alongy	2205; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Along Y; when the Line Properties PropertyManager page is open for a selected line in the graphics area, sel_line RMB context menu > Make AlongY
swCommands_Add_Constraint_Alongz	2206; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Along Z; when the Line Properties PropertyManager page is open for a selected line in the graphics area, sel_line RMB context menu > Make AlongZ
swCommands_Add_Constraint_Atinter	1719; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Intersection
swCommands_Add_Constraint_Atmid	1718; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Midpoint
swCommands_Add_Constraint_Atpierce	1724; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Pierce
swCommands_Add_Constraint_Coinc	1720; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Coincident
swCommands_Add_Constraint_Colinear	1712; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Colinear
swCommands_Add_Constraint_Concent	1717; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Concentric
swCommands_Add_Constraint_Coradial	1713; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Coradial
swCommands_Add_Constraint_Equalcurvature	1729; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Equal Curvature
swCommands_Add_Constraint_Equaltangent	1730; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Equal tangent
swCommands_Add_Constraint_Fix	1723; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Fix; when the Line Properties PropertyManager page is open for a selected line in the graphics area, sel_line RMB context menu > Make Fixed
swCommands_Add_Constraint_G3Touch	3425; valid only for part sketches in edit mode with a multi-selected arc and spline, adds a continuous curvature variation relation to the selected arc and spline; in the Properties PropertyManager page click Add Relations > Torsion Continuity; in the pop-up constraints dialog, click Make Torsion Continuity
swCommands_Add_Constraint_Horiz	1710; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Horizontal
swCommands_Add_Constraint_Merge	1725; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Merge
swCommands_Add_Constraint_Normal	1726; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Normal
swCommands_Add_Constraint_Onsurface	2217; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > On Surface
swCommands_Add_Constraint_Parallel	1715; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Parallel
swCommands_Add_Constraint_Parallelyz	1727; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Parallel YZ
swCommands_Add_Constraint_Parallelzx	1728; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Parallel ZX
swCommands_Add_Constraint_Perp	1714; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Perpendicular
swCommands_Add_Constraint_Planar_Offset	3003; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Offset
swCommands_Add_Constraint_SameCurvelen	3153; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Equal Arc/Spline
swCommands_Add_Constraint_Samelen	1721; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Equal
swCommands_Add_Constraint_Sym	1722; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Symmetric
swCommands_Add_Constraint_Tanface	1731; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Tangent to Face
swCommands_Add_Constraint_Tang	1716; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Tangent
swCommands_Add_Constraint_Traction	1732; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Traction
swCommands_Add_Constraint_Vert	1711; accessible only for part sketches in edit mode where this relation is possible; click Sketch toolbar > Relations > Add Relation or Tools menu > Relations > Add; select a sketch segment in the graphics area; in the Add Relations PropertyManager page click Add Relations > Vertical
swCommands_Add_Coverings	2286; valid for the SOLIDWORKS Routing add-in and a selected route segment in an open routing assembly, opens the Covering PropertyManager page; Routing Tools toolbar > Covering
swCommands_Add_Derived_Configuration	2461; in the ConfigurationManager, configuration_name RMB menu > Add Derived Configuration
swCommands_Add_Feature_Dims	1552; valid for dimensioned parts; in FeatureManager design tree, feature_name RMB menu > Show All Dimensions
swCommands_Add_Fitting	2285; valid for the SOLIDWORKS Routing add-in and a routing assembly; Piping or Flexible Tubing or User Defined toolbar > Add Fitting
swCommands_Add_OverallDim_To_ChainDim	3424; valid only if an overall chain dimension does not already exist for the chain dimension set, automatically adds an overall dimension between a selected dimension in the chain dimension set and the dimension(s) that are farthest from the selection, in both directions if applicable; RMB menu > Add Overall
swCommands_Add_Part_Block	2823; valid for blocks created in assembly layouts; in the FeatureManager design tree, block_name RMB menu > Make Part from Block
swCommands_Add_Slope	3103; valid for the SOLIDWORKS Routing add-in and a piping assembly, opens the Pipe Slope PropertyManager page; Piping toolbar > Add Slope
swCommands_Add_Split_Feat_To_Asm	1818; valid only for parts with a split feature; Insert menu > Features > Create Assembly
swCommands_Add_to_CMarkSet	3131; valid only for drawings with a center mark set; in the graphics view, center_mark RMB menu >Add to Center Mark Set
swCommands_Add_To_Palette	2171; valid for parts with a selected geometric tolerance symbol, opens the Add to Library PropertyManager page; in the graphics area, geo_tol RMB menu > Add to Library; also valid for assemblies; in the FeatureManager design tree, component_name RMB menu > Add to Library
swCommands_AddCurvatureControl	416; valid only for 2D spline sketches; Spline Tools toolbar > Add Curvature Control
swCommands_AddRelation	71; valid for sketches in edit mode; Dimensions/Relations toolbar > Add Relation
swCommands_AddRemove	515; valid for blocks in edit mode; Layout or Blocks toolbar >Add/Remove
swCommands_AddTangencyControl	415; valid only for 2D and 3D spline sketches; Spline Tools toolbar > Add Tangency Control
swCommands_AddTo_Chain_Dimension	3406; valid for a selected dimension in a chain dimension set; RMB menu > Add to Chain
swCommands_AdvancedHoleWizard	3172; opens the Hole Specification PropertyManager page; Features toolbar > Advanced Hole Wizard
swCommands_AdvancedStructuralMember	3335;  creates a structural member feature by sweeping pre-defined profiles along user-defined paths; Structure System toolbar > Create Structure System
swCommands_Align	474; alternative to swCommands_Toolbar_Align; View menu > Toolbars > Align
swCommands_Align_Horz	1511; valid for drawing view items; in the graphics area, view_item RMB menu > Alignment > Align Horizontal by Origin
swCommands_Align_Horz_By_Center	695; valid for drawing view items; in the graphics area, view_item RMB menu > Alignment > Align Horizontal by Center
swCommands_Align_Ordinate	1505; valid for drawings of circles or arcs with angular running dimensions; in the graphics area, angular_running_dimension RMB menu > Display Options > Align Running Dimension
swCommands_Align_Vert	1512; valid for drawing view items; in the graphics area, view_item RMB menu > Alignment > Align Vertical by Origin
swCommands_Align_Vert_By_Center	694; valid for drawing view items; in the graphics area, view_item RMB menu > Alignment > Align Vertical by Center
swCommands_Align_With_Assy_Origin	2274; valid in assemblies after component RMB menu > Move with Triad command; in the graphics area, triad_center_ball RMB menu > Align with Assembly Origin
swCommands_Align_With_Comp_Origin	2273; valid in assemblies after component RMB menu > Move with Triad command; in the graphics area, triad_center_ball RMB menu > Align with Component Origin
swCommands_Align_With_Selection	2279; valid after component RMB menu > Move with Triad command in assembly; in the graphics area, triad_ball_arrow RMB menu > Align with selection
swCommands_AlignBetweenLines	579; valid in drawings where a dimension or annotation and two vertical or horizontal lines are selected; Align toolbar > Align Between Lines
swCommands_AlignBottom	310; valid for multi-selected annotations or dimensions; Align toolbar > Align Bottom
swCommands_AlignCollinearRadial	145; valid for multi-selected dimensions; Align toolbar > Align Collinear/Radial
swCommands_AlignedSectionView	108; valid for parts and assemblies; in the Section View Assist PropertyManager page; Cutting Line > Aligned
swCommands_AlignHorizontal	314; valid for multi-selected annotations or dimensions; Align toolbar > Align Horizontal
swCommands_AlignLeft	389; valid for selected text; Formatting toolbar > Align Left
swCommands_AlignParallelConcentric	146; valid for multi-selected dimensions; Align toolbar > Align Parallel/Concentric
swCommands_AlignRight	388; valid for selected text; Formatting toolbar > Align Right
swCommands_AlignSketch	379; valid for parts; 2D To 3D toolbar > Align Sketch or Tools > Sketch Tools > Align > Sketch
swCommands_AlignTop	309; valid for multi-selected annotations or dimensions; Align toolbar > Align Top
swCommands_AlignVertical	315; valid for multi-selected annotations or dimensions; Align toolbar > Align Vertical
swCommands_AlternatePositionView	357; valid for a selected drawing sheet with alternate position views; Drawing toolbar > Alternate Position View
swCommands_AlternativeHandwrittenDim_0	3388; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the first of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_1
swCommands_AlternativeHandwrittenDim_1	3389; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the second of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_2
swCommands_AlternativeHandwrittenDim_2	3390; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the third of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_3
swCommands_AlternativeHandwrittenDim_3	3391; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the fourth of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_4
swCommands_AlternativeHandwrittenDim_4	3392; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the fifth of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_5
swCommands_AlternativeHandwrittenDim_5	3393; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the sixth of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_6
swCommands_AlternativeHandwrittenDim_6	3394; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the seventh of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_7
swCommands_AlternativeHandwrittenDim_7	3395; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the eighth of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_8
swCommands_AlternativeHandwrittenDim_8	3396; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the ninth of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_9
swCommands_AlternativeHandwrittenDim_9	3397; valid only on supporting pen/stylus hardware, updates a selected handwritten dimension with the tenth of ten alternative values that were calculated from InkAnalysis handwriting recognition; RMB dimension context menu > alternative_value_10
swCommands_Ambient_Occlusion	3030; valid only if  RealView Graphics is enabled in parts and assemblies; View toolbar > View Settings > Ambient Occlusion
swCommands_AnalysistoolsDraftAnalysis	2885; valid for assemblies with a mold base and design parts; Mold Tools toolbar > Draft Analysis
swCommands_AnalysistoolsPartingLineAnalysis	2887; valid for assemblies with a mold base and design parts; Mold Tools toolbar > Parting Line Analysis
swCommands_AnalysistoolsUndercutAnalysis	2886; valid for assemblies with a mold base and design parts; Mold Tools toolbar > Undercut Analysis
swCommands_AngleSnap	536; valid during sketch creation only with parts that contain curves such as circles, arcs, fillets, parabolas, ellipses, partial ellipses, or splines; Quick Snaps toolbar > Angle Snap
swCommands_AngularOrdinateDimension	3068; valid only for arcs in drawing views; Dimensions/Relations toolbar > Angular Running Dimension
swCommands_Anim_Custom_Msg_Display_Camera_By_Name	2353; valid only in the context of Motion Studies for a selected Orientation and Camera View bar key; in the Motion Study gantt chart, orientation_and_camera_views_time_bar_key RMB menu > View Orientation > camera_view_name
swCommands_Anim_Custom_Msg_Display_Vw_By_Name	2352; valid only in the context of Motion Studies for a selected Orientation and Camera View bar key; in the Motion Study gantt chart, orientation_and_camera_views_time_bar_key RMB menu > View Orientation > view_name
swCommands_Anim_Edit_Dim	2798; valid only in the context of Motion Studies; in the MotionManager tree, MateGroup1 > mate_name > mate_dimension RMB menu > Edit Dimension
swCommands_Anim_Lock_Viewpoint	2644; valid only in the context of Motion Studies; in the MotionManager tree, Orientation and Camera Views RMB menu > Disable View Key Creation
swCommands_Anim_Suppress_Viewpoint	2643; valid only in the context of Motion Studies; in the MotionManager tree, Orientation and Camera Views RMB menu > Disable Playback of View Keys
swCommands_Anim_View_Back	2344; valid only in the context of Motion Studies for a selected Orientation and Camera View time bar; in the gantt chart, orientation_and_camera_views_time_bar RMB menu > View Orientation > Back
swCommands_Anim_View_Bottom	2348 valid only in the context of Motion Studies for a selected Orientation and Camera View time bar; in the gantt chart, orientation_and_camera_views_time_bar RMB menu > View Orientation > Bottom
swCommands_Anim_View_Camera	2354; valid only in the context of Motion Studies with a camera view and for a selected Orientation and Camera View time bar; in the Motion Study gantt chart, orientation_and_camera_views_time_bar RMB > Camera View
swCommands_Anim_View_Dimetric	2351; valid only in the context of Motion Studies and a selected Orientation and Camera View time bar; in the gantt chart, orientation_and_camera_views_time_bar RMB menu > View Orientation > Dimetric
swCommands_Anim_View_Front	2343; valid only in the context of Motion Studies and a selected Orientation and Camera View time bar; in the gantt chart, orientation_and_camera_views_time_bar RMB menu > View Orientation > Front
swCommands_Anim_View_Isometric	2349; valid only in the context of Motion Studies and a selected Orientation and Camera View time bar; in the gantt chart, orientation_and_camera_views_time_bar RMB menu > View Orientation > Isometric
swCommands_Anim_View_Left	2345; valid only in the context of Motion Studies and a selected Orientation and Camera View time bar; in the gantt chart, orientation_and_camera_views_time_bar RMB menu > View Orientation > Left
swCommands_Anim_View_Right	2346; valid only in the context of Motion Studies and a selected Orientation and Camera View row; in the gantt chart, orientation_and_camera_views_time_bar RMB menu > View Orientation > Right
swCommands_Anim_View_Top	2347; valid only in the context of Motion Studies and a selected Orientation and Camera View time bar; in the gantt chart, orientation_and_camera_views_time_bar RMB menu > View Orientation > Top
swCommands_Anim_View_Trimetric	2350; valid only in the context of Motion Studies and a selected Orientation and Camera View time bar; in the gantt chart, orientation_and_camera_views_time_bar RMB menu > View Orientation > Trimetric
swCommands_Animation_CancelSolver	2929; Motion Study tab RMB menu > Cancel Solver Status
swCommands_Animation_Delete	2144; Motion Study tab RMB menu > Delete
swCommands_Animation_Duplicate	2827; Motion Study tab RMB menu > Duplicate
swCommands_Animation_Ff	1962; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Fast Forward
swCommands_Animation_Goto_End	1963; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, End
swCommands_Animation_Goto_Start	1959; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Start
swCommands_Animation_MoveCurTime	2918; valid only in the context of Motion Studies; opens the Edit Time dialog; in Motion Study gantt chart, RMB menu > Move Time Bar
swCommands_Animation_New	2142; valid for assemblies; Assembly toolbar > New Motion Study
swCommands_Animation_Pause	1964; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Pause
swCommands_Animation_Play	1961; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Play
swCommands_Animation_Play_Fast	1971; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Fast Play
swCommands_Animation_Play_From_Start	657; MotionManager toolbar > Play from Start
swCommands_Animation_Play_Loop	1968; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Playback Mode: Loop
swCommands_Animation_Play_Normal	1967; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Playback Mode: Normal
swCommands_Animation_Play_Reciprocate	1969; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Playback Mode: Reciprocate
swCommands_Animation_Play_Slow	1970; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Slow Play
swCommands_Animation_Record	1966; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Save Animation
swCommands_Animation_Rename	2143; Motion Study tab RMB menu > Rename
swCommands_Animation_Rewind	1960; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Rewind
swCommands_Animation_SolverStatus	2930; Motion Study tab RMB menu > Show Solver Status
swCommands_Animation_Stop	1965; valid only when exploding a view or collapsing an exploded view; Configurations tab > exploded_view_name RMB menu > Animate Explode/Collapse; in Animation Controller Pop-Up Toolbar, Stop
swCommands_Animation_Wizard	659; valid only in the context of Motion Studies, opens the Select an Animation Type dialog; in a Motion Study gantt chart, RMB menu > Animation Wizard; also available on the MotionManager toolbar
swCommands_AnimEditTime_Dlg_Cancel	2920; valid only in the context of Motion Studies; in the Motion Study gantt chart RMB menu > Move Time Bar > Edit Time dialog > Cancel
swCommands_AnimEditTime_Dlg_Increment	2923; valid only in the context of Motion Studies; in the Motion Study gantt chart RMB menu > Move Time Bar > Edit Time dialog > Spin Increment
swCommands_AnimEditTime_Dlg_Ok	2919; valid only in the context of Motion Studies; in the Motion Study gantt chart RMB menu > Move Time Bar > Edit Time dialog > OK
swCommands_AnimEditTime_Dlg_SetOffset	2922; valid only in the context of Motion Studies; in the Motion Study gantt chart RMB menu > Move Time Bar > Edit Time dialog > Offset
swCommands_AnimEditTime_Dlg_SetTime	2921; valid only in the context of Motion Studies; in the Motion Study gantt chart RMB menu > Move Time Bar > Edit Time dialog > Exact Time
swCommands_Animkey_Clear	2137; valid only in the context of Motion Studies for a selected gantt chart time bar key; in the Motion Study gantt chart, orientation_and_camera_views_time_bar_key RMB > Delete
swCommands_Animkey_Copy	2135; valid only in the context of Motion Studies for a selected gantt chart time bar key; in Motion Study gantt chart, time_bar_key RMB menu > Copy
swCommands_Animkey_Cut	2134; valid only in the context of Motion Studies for a selected gantt chart time bar key; in the Motion Study gantt chart, time_bar_key RMB menu > Cut
swCommands_Animkey_EditTime	2917; valid only in the context of Motion Studies for a selected gantt chart time bar key, opens the Edit Time dialog; in the Motion Study gantt chart, time_bar_key RMB menu > Edit Key Point Time
swCommands_Animkey_Interp_Easein_Sin	2161; valid only in the context of Motion Studies for a selected gantt chart time bar key at position B; in the Motion Study gantt chart, time_bar_key_pos_B RMB menu > Interpolation mode > Ease in
swCommands_Animkey_Interp_Easeinout_Sin	2163; valid only in the context of Motion Studies for a selected gantt chart time bar key at position B; in the Motion Study gantt chart, time_bar_key_pos_B RMB menu > Interpolation mode > Ease in/Ease out
swCommands_Animkey_Interp_Easeout_Sin	2162; valid only in the context of Motion Studies for a selected gantt chart time bar key at position B; in the Motion Study gantt chart, time_bar_key_pos_B RMB menu > Interpolation mode > Ease out
swCommands_Animkey_Interp_Linear	2157; valid only in the context of Motion Studies for a selected gantt chart time bar key at position B; in the Motion Study gantt chart, time_bar_key_pos_B RMB menu > Interpolation mode > Linear
swCommands_Animkey_Interp_Step_End	2156; valid only in the context of Motion Studies for a selected gantt chart time bar key at position B; in the Motion Study gantt chart, time_bar_key_pos_B RMB menu > Interpolation mode > Snap
swCommands_Animkey_Paste	2136; valid only in the context of Motion Studies for a copied gantt chart time bar key; in the Motion Study gantt chart, time_bar_key RMB menu > Paste
swCommands_Animkey_Place	2140; valid only in the context of Motion Studies; in the Motion Study gantt chart, RMB menu > Place Key
swCommands_Animkey_Replace	2141; valid only in the context of Motion Studies for a selected gantt chart time bar key; in the Motion Study gantt chart, time_bar_key RMB menu > Replace Key
swCommands_Animkey_Reverse_Path	2150; valid only in the context of Motion Studies for a selected assembly gantt chart time bar key; in the Motion Study gantt chart, time_bar_key RMB menu > Reverse Path
swCommands_Animkey_Select_All	2138; valid only in the context of Motion Studies; in the Motion Study gantt chart, RMB menu > Select All
swCommands_Animkey_Suppress	2155; valid only in the context of Motion Studies for a selected gantt chart time bar key; in the Motion Study gantt chart, time_bar_key RMB > Suppress Key
swCommands_AnimMateSuppress	2932; valid only in the context of Motion Studies for a selected mate; in the Motion Study gantt chart, mate_line_gantt_time_bar RMB menu > Suppress
swCommands_AnimMateUnsuppress	2933; valid only in the context of Motion Studies for a selected mate; in the Motion Study gantt chart, mate_line_gantt_time_bar RMB menu > Unsuppress
swCommands_Ann_Feat_Dim	1550; in the FeatureManager design tree, Annotations folder RMB menu > Show Feature Dimensions
swCommands_Ann_Ref_Dim	1551; in the FeatureManager design tree, Annotations folder RMB menu > Show Reference Dimensions
swCommands_Ann_Show	1549; in the FeatureManager design tree, Annotations folder RMB menu > Display Annotations
swCommands_Annotation_View_Create	2210; in the FeatureManager design tree, Annotations folder RMB menu > Insert Annotation View
swCommands_Annotation_View_Hide	2233; in the FeatureManager design tree, Annotations > annotation_view RMB menu > Hide
swCommands_Annotation_View_Show	2232; in the FeatureManager design tree, Annotations > annotation_view RMB menu > Show
swCommands_AnnotationAlignLeft	307; valid for multi-selected annotations; Align toolbar > Align Left
swCommands_AnnotationAlignRight	308; valid for multi-selected annotations; Align toolbar > Align Right
swCommands_Annotations	475; alternative to swCommands_Toolbar_Annotation; View menu > Toolbars > Annotation
swCommands_Api_Help_Contents	833; ? menu > API Help
swCommands_App_Exit	2825; File menu > Exit
swCommands_App_Servicepacks	1233; ? menu > Check for Updates
swCommands_Apply	696; dialog resource Apply
swCommands_AreaHatchFill	384; valid only for a selected face or closed sketch profile in a drawing; Annotations toolbar > Area Hatch/Fill
swCommands_Asm_Cir_Feat_Pattern	1376; valid for a selected assembly hole or cut and a selected axis about which to create the circular pattern, opens the Circular Pattern PropertyManager page; Insert menu > Assembly Feature > Circular Pattern
swCommands_Asm_Feat_Chamfer	2957; valid for a selected assembly feature, opens the Chamfer PropertyManager page; Insert menu > Assembly Feature > Chamfer
swCommands_Asm_Feat_Cut_Extr	1001; valid for a selected location on an assembly, opens the Extrude PropertyManager page; Insert menu > Assembly Feature > Cut > Extrude
swCommands_Asm_Feat_Cut_Revolve	1002; valid for a selected location on an assembly, opens the Revolve PropertyManager page; Insert menu > Assembly Feature > Cut > Revolve
swCommands_Asm_Feat_Cut_Sweep	2958; valid for assemblies, opens the Cut-Sweep PropertyManager page; Insert menu > Assembly Feature > Cut > Sweep
swCommands_Asm_Feat_Fillet	2956; valid for a selected assembly feature, opens the Fillet PropertyManager page; Insert menu > Assembly Feature > Fillet
swCommands_Asm_Feature_Hole	1003; valid for a selected location on an assembly; Insert menu > Assembly Feature > Hole > Simple
swCommands_Asm_Lin_Feat_Pattern	1375; valid for a selected assembly hole or cut and a selected axis for the pattern direction, opens the Linear Pattern PropertyManager page; Insert menu > Assembly Feature > Linear Pattern
swCommands_Asm_Sketch_Feat_Pattern	1382; valid for a selected assembly hole or cut, opens the Sketch Driven Pattern PropertyManager page; Insert menu > Assembly Feature > Sketch Driven Pattern
swCommands_Asm_Table_Feat_Pattern	1380; valid for a selected assembly hole or cut, opens the Table Driven Pattern dialog; Insert menu > Assembly Feature > Table Driven Pattern
swCommands_Assemblies	476; alternative to swCommands_Toolbar_Assembly; View menu > Toolbars > Assembly
swCommands_Assembly_Stats	1215; valid for assemblies; Assembly toolbar > Performance Evaluation
swCommands_AssemblyTransparency	3; valid only for assemblies that have one or more components in edit mode; in the graphics area, click RMB menu > Assembly Transparency
swCommands_Asset_Publish	3215; opens the Asset Publisher PropertyManager page; Tools menu or toolbar > Asset Publisher
swCommands_Assign_Smart_Fastener	2452; valid only for Toolbox add-ins and assemblies and only when editing a Smart Fastener grouping, opens the Smart Fastener dialog; in the Smart Fasteners PropertyManager page, Results > Group1 > Series1 RMB menu > Change fastener type
swCommands_Attach_Dimensions	986; valid only for drawings; Tools menu > Dimensions > Attach Dimensions
swCommands_Auto_Ann_View_Generate	2223; in the FeatureManager design tree, Annotations folder RMB menu > Automatically Place into Annotation Views
swCommands_Auto_Dimension_Toggle	3026; valid for an open sketch with an active sketch tool; Sketch toolbar > Add Dimension
swCommands_Auto_Jog	639; valid for a selected ordinate dimension; in the graphics area, ord_dim RMB menu > Display Options > Re-Jog Ordinate
swCommands_Auto_Size	1702; valid for a reference plane that is re-sized; in the graphics area ref_plane RMB menu > Autosize
swCommands_AutoArrangeDimension	2976; valid for multi-selected annotations or dimensions; Align toolbar > Auto Arrange Dimensions
swCommands_AutoBalloon	447; valid for drawings; Annotations toolbar > Auto Balloon
swCommands_AutoExplodeLine	3296; valid for assemblies, opens Smart Explode Lines PropertyManager to insert or edit smart explode lines for a selected explode view; Assembly toolbar > Insert/Edit Smart Explode Lines
swCommands_Autoinfer_Toggle	1301; valid for drawings; Tools menu > Sketch Settings > Enable Snapping
swCommands_Automatic_Cutlist	2601; valid for a selected body folder or cut list folder; in the FeatureManager design tree, folder RMB menu > Create Cut Lists Automatically
swCommands_AutomaticRelations	52; Dimensions/Relations toolbar > Automatic Relations
swCommands_AutomaticUpdateCutlists	3122; valid for a cut list folder that has enabled Create Cut Lists Automatically; in the FeatureManager design tree, folder RMB menu > Update Automatically
swCommands_Autosolve_Toggle	997; valid for drawings; Tools menu > Sketch Settings > Automatic Solve
swCommands_Auxiliary	391; valid for part documents with a single 2D sketch in edit mode; 2D to 3D toolbar > Auxiliary Sketch
swCommands_AuxiliaryView	33; valid for drawings; Drawing toolbar > Auxiliary View
swCommands_Axis	22; valid for parts; Reference Geometry toolbar > Axis or Features toolbar > Reference Geometry > Axis
swCommands_Back	162; View toolbar > View Orientation > Back
swCommands_Backward	1616; palette toolbar > Back

上面只是其中一部分，完全版请自己看API。

（2）第二个为swCostFeatureType_e,这个枚举值为成本特征类型，下面是官方的具体枚举值：

Member	Description
swcAdditiveFeatureType	63
swcCustomBodiesFolderType	4
swcCustomBodyItemType	10
swcCustomOperationsFolderType	6
swcEndcapFolderType	69
swcEndCutFeatureItemType	67
swcEndCutFeaturesFolderType	66
swcGussetsFolderType	70
swcMachineCustomSetupCostSubFolderType	60
swcMachinedBodiesFolderType	0
swcMachinedBodyItemType	8
swcMachineOperationSetupCostSubFolderType	59
swcMachineSetupCostItemType	61
swcMachineSetupCostSubFolderType	58
swcMachiningChamferFeatureItemType	22
swcMachiningChamferOperationItemType	23
swcMachiningCustomOperationFolderType	43
swcMachiningEndProfileFeatureItem	54
swcMachiningFaceAdditionalOperationItem	24
swcMachiningFaceFeatureItemType	25
swcMachiningFaceOperationItemType	26
swcMachiningFilletFeatureItem	57
swcMachiningGrooveFeatureItem	55
swcMachiningHoleFeatureItem	38
swcMachiningHoleOperationsFolderType	44
swcMachiningItemBendFeatureType	62
swcMachiningItemCustomOperation	36
swcMachiningLibraryFeaturesFolderType	45
swcMachiningLibraryFeatureType	53
swcMachiningLocalSetupCostItemType	28
swcMachiningMillAdditionalOperationItemType	29
swcMachiningMillFeatureItemType	27
swcMachiningMillOperationItemType	30
swcMachiningMillOperationsFolderType	46
swcMachiningNCAFolderType	48
swcMachiningOperationHoleCDrill	40
swcMachiningOperationHoleDrill	39
swcMachiningOperationHoleTapping	41
swcMachiningPatternedHoleFeatureItemType	31
swcMachiningPatternedHoleSubFeatureItemType	32
swcMachiningPlateCutpathFolderType	42
swcMachiningPlateCutpathItem	37
swcMachiningSetupCostFeatureItem	33
swcMachiningSetupCostFolderType	49
swcMachiningSetupCostItemType	34
swcMachiningSetupCostOperationItemType	35
swcMachiningTurnOperationsFolderType	47
swcMachiningVolumeAdditionalOperationItem	52
swcMachiningVolumeFeatureItemType	50
swcMachiningVolumeOperationItemType	51
swcMultiBodySetupCostItem	11
swcNoCostAssignedBody	56
swcNoCostAssignedFolderType	7
swcSetupBodyFolderType	2
swcSheetMetalBendsFolderType	13
swcSheetMetalBodiesFolderType	1
swcSheetMetalBodyItemType	9
swcSheetMetalCustomOperationsFolderType	14
swcSheetMetalCutPathesFolderType	15
swcSheetMetalCutPathItemType	12
swcSheetMetalItemCustomOperation	21
swcSheetMetalItemFeatureType	19
swcSheetMetalItemSetupCost	20
swcSheetMetalLibraryFeaturesFolderType	16
swcSheetMetalLibraryNoCostAssignedFolderType	17
swcSheetMetalSetupCostFolderType	18
swcStructuralBodiesFolderType	3
swcStructuralBodyItemType	68
swcWeldFeatureItemType	64
swcWeldingFolderType	5
swcWeldOperationItemType	65

本篇文章要介绍的就是这么多，我们下篇文章再见。