OSPF-MGRE类型实验

最新推荐文章于 2024-06-14 13:37:51 发布

sureTd

最新推荐文章于 2024-06-14 13:37:51 发布

阅读量40

点赞数

文章标签：网络

本文链接：https://blog.csdn.net/m0_53283585/article/details/128777981

版权

在这里插入图片描述
实验拓扑：

实验配置

R1：
[r1-LoopBack0]ip add 192.168.1.1 24
[r1-GigabitEthernet0/0/0]ip add 16.1.1.1 24
[r1-GigabitEthernet0/0/2]ip add 61.1.1.1 24

R2：
[r2-LoopBack0]ip add 192.168.2.1 24
[r2-GigabitEthernet0/0/0]ip add 26.1.1.1 24

R3：
[r3-LoopBack0]ip add 192.168.3.1 24
[r3-GigabitEthernet0/0/0]ip add 36.1.1.1 24

R4：
[r4-LoopBack0]ip address 192.168.4.1 24
[r4-GigabitEthernet0/0/0]ip add 46.1.1.1 24

R5：
[r5-LoopBack0]ip add 192.168.5.1 24
[r5-GigabitEthernet0/0/0]ip add 56.1.1.1 24

R6：
[r6-GigabitEthernet0/0/0]ip add 16.1.1.2 24
[r6-GigabitEthernet2/0/0]ip add 61.1.1.2 24
[r6-GigabitEthernet0/0/1]ip add 26.1.1.2 24
[r6-GigabitEthernet0/0/2]ip add 36.1.1.2 24
[r6-GigabitEthernet3/0/0]ip add 56.1.1.2 24
[r6-GigabitEthernet4/0/0]ip add 46.1.1.2 24

在这里插入图片描述

R1：[r1]ip route-static 0.0.0.0 0 16.1.1.2
[r1]ip route-static 0.0.0.0 0 61.1.1.2
R2：[r2]ip route-static 0.0.0.0 0 26.1.1.2
R3：[r3]ip route-static 0.0.0.0 0 36.1.1.2
R4：[r4]ip route-static 0.0.0.0 0 46.1.1.2
R5：[r5]ip route-static 0.0.0.0 0 56.1.1.2

在这里插入图片描述

R1：
[r1]interface Tunnel 0/0/0
[r1-Tunnel0/0/0]ip add 10.1.1.1 24
[r1-Tunnel0/0/0]tunnel-protocol gre p2mp
[r1-Tunnel0/0/0]source 16.1.1.1
[r1-Tunnel0/0/0]nhrp entry multicast dynamic
[r1-Tunnel0/0/0]nhrp network-id 100

R2：
[r2]interface Tunnel 0/0/0
[r2-Tunnel0/0/0]ip add 10.1.1.2 24
[r2-Tunnel0/0/0]tunnel-protocol gre p2mp
[r2-Tunnel0/0/0]source g0/0/0
[r2-Tunnel0/0/0]nhrp entry 10.1.1.1 16.1.1.1 register
[r2-Tunnel0/0/0]nhrp network-id 100

R3：
[r3]interface Tunnel 0/0/0
[r3-Tunnel0/0/0]ip address 10.1.1.3 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp
[r3-Tunnel0/0/0]source g0/0/0
[r3-Tunnel0/0/0]nhrp entry 10.1.1.1 16.1.1.1 register
[r3-Tunnel0/0/0]nhrp network-id 100

MGEE:

R1：
[r1]int Tunnel 0/0/1
[r1-Tunnel0/0/1]ip add 10.1.2.1 24
[r1-Tunnel0/0/1]tunnel-protocol gre p2mp
[r1-Tunnel0/0/1]source 61.1.1.1
[r1-Tunnel0/0/1]nhrp entry multicast dynamic
[r1-Tunnel0/0/1]nhrp network-id 101

R4：
[r4]int Tunnel 0/0/1
[r4-Tunnel0/0/1]ip add 10.1.2.4 24
[r4-Tunnel0/0/1]tunnel-protocol gre p2mp
[r4-Tunnel0/0/1]source g0/0/0
[r4-Tunnel0/0/1]nhrp entry 10.1.2.1 61.1.1.1 register
[r4-Tunnel0/0/1]nhrp network-id 101

R5：
[r5]int Tunnel 0/0/1
[r5-Tunnel0/0/1]ip address 10.1.2.5 24
[r5-Tunnel0/0/1]tunnel-protocol gre p2mp
[r5-Tunnel0/0/1]source g0/0/0
[r5-Tunnel0/0/1]nhrp entry 10.1.2.1 61.1.1.1 register
[r5-Tunnel0/0/1]nhrp network-id 101

Ospf的配置：

R1：
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]network 192.168.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]network 10.1.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]network 10.1.2.1 0.0.0.0

R2：
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]network 192.168.2.1 0.0.0.0
[r2-ospf-1-area-0.0.0.0]network 10.1.1.2 0.0.0.0

R3：
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]network 192.168.3.1 0.0.0.0
[r3-ospf-1-area-0.0.0.0]network 10.1.1.3 0.0.0.0

R4：
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]network 192.168.4.1 0.0.0.0
[r4-ospf-1-area-0.0.0.0]network 10.1.2.4 0.0.0.0

R5：
[r5]ospf 1 router-id 5.5.5.5
[r5-ospf-1]area 0
[r5-ospf-1-area-0.0.0.0]network 192.168.5.1 0.0.0.0
[r5-ospf-1-area-0.0.0.0]network 10.1.2.5 0.0.0.0

改变端口协议方式：

[r1-Tunnel0/0/0]ospf network-type broadcast
[r1-Tunnel0/0/0]ospf dr-priority 1
[r1-Tunnel0/0/1]ospf network-type broadcast
[r2-Tunnel0/0/0]ospf network-type broadcast
[r2-Tunnel0/0/0]ospf dr-priority 0
[r3-Tunnel0/0/0]ospf network-type broadcast
[r3-Tunnel0/0/0]ospf dr-priority 0
[r4-Tunnel0/0/1]ospf network-type broadcast
[r5-Tunnel0/0/1]ospf network-type broadcast
[r5-Tunnel0/0/1]nhrp entry multicast dynamic