路由重分布

ADoubleLiu

于 2022-05-24 11:42:49 发布

阅读量602

点赞数 1

分类专栏： Cisco 文章标签：网络

本文链接：https://blog.csdn.net/m0_54082441/article/details/124943915

版权

Cisco 专栏收录该内容

13 篇文章 2 订阅

订阅专栏


Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#host R1
R1(config)#int s0/0/0
R1(config-if)#ip add 192.168.12.1 255.255.255.0
R1(config-if)#clock rate 64000
R1(config-if)#no shutdown 
R1(config)#int loopback 0
R1(config-if)#ip add 1.1.1.1 255.255.255.0
R1(config-if)#no shutdown 
R1(config)#int loopback 1
R1(config-if)#ip add 202.121.241.8 255.255.255.0
R1(config-if)#no shutdown 
R1(config-if)#exit

R1(config)#router rip
R1(config-router)#version 2
R1(config-router)#net 192.168.12.0 
R1(config-router)#net 1.1.1.0
R1(config-router)#exit
R1(config)#ip route 0.0.0.0 0.0.0.0 loopback 1
R1(config)#exit


R1(config)#router rip
R1(config-router)#redistribute static metric 3
R1(config-router)#exit


Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#host R2
R2(config)#int loopback 0
R2(config-if)#ip ad 2.2.2.2 255.255.255.0
R2(config-if)#no shutdown
R2(config-if)#exit
R2(config)#int s0/0/0
R2(config-if)#ip add 192.168.12.2 255.255.255.0
R2(config-if)#no shutdown 
R2(config-if)#exit
R2(config)#int s0/0/1
R2(config-if)#exit
R2(config)#int s0/0/1
R2(config-if)#clock rate 64000
R2(config-if)#ip add 192.168.23.1 255.255.255.0
R2(config-if)#no shutdown 

R2(config)#router rip
R2(config-router)#ver
R2(config-router)#version 2
R2(config-router)#net 192.168.12.0


R2(config-if)#router eigrp 1
R2(config-router)#net 2.2.2.0
R2(config-router)#net 192.168.23.0
R2(config-router)#exit

R2(config)#router rip 
R2(config-router)#redistribute eigrp 1 metric 4

R2(config)#router eigrp 1
R2(config-router)#redistribute rip metric 1000 100 255 1 1500



Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#host R3
R3(config)#int loopback 0
R3(config-if)#ip add 3.3.3.3 255.255.255.0
R3(config-if)#no shutdown 
R3(config-if)#exit
R3(config)#int s0/0/1
R3(config-if)#ip add 192.168.23.2 255.255.255.0
R3(config-if)#no shutdown 
R3(config-if)#exit
R3(config)#int s0/0/0
R3(config-if)#ip add 192.168.34.1 255.255.255.0
R3(config-if)#clock rate 64000
R3(config-if)#no shutdown 
R3(config-if)#exit

R3(config)#router eigrp 1
R3(config-router)#net 192.168.23.0


R3(config)#router ospf 1
R3(config-router)#net 3.3.3.0 0.0.0.255 area 0
R3(config-router)#net 192.168.34.0 0.0.0.255 area 0
R3(config-router)#exit


R3(config)#router eigrp 1
R3(config-router)#redistribute ospf 1 metric 1000 100 255  1 1500

R3(config)#router ospf 1
R3(config-router)#redistribute eigrp 1 metric 30 metric-type 1 subnets


Router>en
Router#conf t
Router(config)#host R4
 
R4(config)#int loopback 0
R4(config-if)#ip add 4.4.4.4 255.255.255.0
R4(config-if)#no shutdown
R4(config-if)#exit 
R4(config)#int s0/0/0
R4(config-if)#ip add 192.168.34.2 255.255.255.0
R4(config-if)#no shutdown 

R4(config-if)#router ospf 1
R4(config-router)#net 4.4.4.0 0.0.0.255 area 0
R4(config-router)#net 192.168.34.0 0.0.0.255 area 0