双向重发布实验

1.配置底层IP及环回
[R1]int lo0
[R1-LoopBack0]ip add 1.1.1.1 24
[R1-LoopBack0]
[R1-LoopBack0]
[R1-LoopBack0]int g0/0/1
[R1-GigabitEthernet0/0/1]q
[R1]int
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]ip add 12.1.1.1 24
[R1]int
[R1]interface g0/0/1
[R1-GigabitEthernet0/0/1]ip add 13.1.1.1 24

[R2]int
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]ip add 12.1.1.2 24
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 24.1.1.1 24

[R3]int
[R3-GigabitEthernet0/0/0]int lo0
[R3-LoopBack0]ip add 3.3.3.3 24
[R3-GigabitEthernet0/0/0]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 34.1.1.1 24
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 13.1.1.2 24

[R4]int
[R4]interface g0/0/0
[R4-GigabitEthernet0/0/0]ip add 24.1.1.2 24
[R4-GigabitEthernet0/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 34.1.1.2 24
[R4-GigabitEthernet0/0/1]int lo0
[R4-LoopBack0]ip add 4.4.4.4 24
[R4-LoopBack0]int g0/0/2
[R4-GigabitEthernet0/0/2]ip add 45.1.1.1 24

[R5]int    
[R5]interface g0/0/0
[R5-GigabitEthernet0/0/0]ip add 45.1.1.2 24
[R5-GigabitEthernet0/0/0]int g0/0/1
[R5-GigabitEthernet0/0/1]ip add 56.1.1.1 24
[R5-GigabitEthernet0/0/1]int lo0
[R5-LoopBack0]ip add 5.5.5.5 24

[R6]int   
[R6]interface g0/0/0
[R6-GigabitEthernet0/0/0]ip add 56.1.1.2 24
[R6-GigabitEthernet0/0/0]int lo0
[R6-LoopBack0]ip add 6.6.6.6 24
[R6-LoopBack0]int
[R6-LoopBack0]int g0/0/1
[R6-GigabitEthernet0/0/1]ip add 67.1.1.1 24

[R7]interface g0/0/0
[R7-GigabitEthernet0/0/0]ip add 67.1.1.2 24
[R7-GigabitEthernet0/0/0]int lo0
[R7-LoopBack0]ip add 7.7.7.7 24

2配置路由

[R1]rip 1
[R1-rip-1]ver 2
[R1-rip-1]net
[R1-rip-1]network 12.0.0.0
[R1-rip-1]net
[R1-rip-1]network 13.0.0.0
[R1-rip-1]net
[R1-rip-1]network 1.0.0.0
 

[R2]rip 1
[R2-rip-1]ver 2
[R2-rip-1]network 2.0.0.0
[R2-rip-1]network 12.0.0.0
[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 24.1.1.1 0.0.0.0

[R3-rip-1]ver 2
[R3-rip-1]network 13.0.0.0
[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 34.1.1.1 0.0.0.0
[R3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0

[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.0
[R4-ospf-1-area-0.0.0.0]undo network 4.4.4.4 0.0.0.0
[R4-ospf-1-area-0.0.0.0]network 0.0.0.0 255.255.255.255

[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1-area-0.0.0.0]network 45.1.1.2 0.0.0.0
[R5-ospf-1-area-0.0.0.0]network 5.5.5.5 

[R6]ospf 1 router-id 6.6.6.6
[R6-ospf-1-area-0.0.0.0]network 56.1.1.2 0.0.0.0
[R6-ospf-1-area-0.0.0.0]network 6.6.6.6 0.0.0.0
[R6-ospf-1-area-0.0.0.0]network 67.1.1.1 0.0.0.0

[R7]ospf 1 router-id 7.7.7.7
[R7-ospf-1-area-0.0.0.0]network 67.1.1.2 0.0.0.0

3.单向重发布

[r7]ospf 1

[r7-ospf-1]import-route direct

4.双向重发布

[r2]rip 1    
[r2-rip-1]import-route ospf 1
[r2-rip-1]q
[r2]ospf 1
[r2-ospf-1]import-route rip     

[r3]rip 1
[r3-rip-1]import-route ospf 1 
[r3-rip-1]q
[r3]ospf 1
[r3-ospf-1]import-route rip 

4.修改优先级

[r3]ip ip-prefix a permit 7.7.7.0 24
[r3]route-policy q permit node 10
[r3-route-policy]if-match ip-prefix a 
[r3-route-policy]apply preference 151 
[r3]rip 1
[r3-rip-1]preference route-policy q
 

5.更改环回类型

[r2]ip ip-prefix z permit 12.1.1.0 24
[r2]ip ip-prefix z permit 2.2.2.0 24
[r2]route-policy z permit node 10
[r2-route-policy]if-match  ip-prefix z
[r2-route-policy]apply cost-type type-1 
[r2-route-policy]q
[r2]route-policy z permit node 20
[r2]ospf 1
[r2-ospf-1]import-route rip route-policy z

[r3]
[r3]ip ip-prefix z permit 13.1.1.0 24
[r3]route-policy z permit node 10
[r3-route-policy]if-match ip-prefix z
[r3-route-policy]apply cost-type type-1
[r3-route-policy]q
[r3]
[r3]route-policy z permit node 20
[r3-route-policy]q
[r3]ospf 1
[r3-ospf-1]import-route rip route-policy z