R1
The device is running!
<Huawei>
<Huawei>
<Huawei>SYS
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r1
[r1]interf
[r1]interface g
[r1]interface GigabitEthernet 0/0/0
[r1-GigabitEthernet0/0/0]ip add 172.16.32.129 29
Jun 6 2021 20:46:06-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]q
[r1]interf
[r1]interface l
[r1]interface LoopBack 0
[r1-LoopBack0]ip add 172.16.33.1 25
[r1-LoopBack0]q
[r1]q
<r1>ping 172.16.32.131
PING 172.16.32.131: 56 data bytes, press CTRL_C to break
Reply from 172.16.32.131: bytes=56 Sequence=1 ttl=255 time=210 ms
Reply from 172.16.32.131: bytes=56 Sequence=2 ttl=255 time=40 ms
Reply from 172.16.32.131: bytes=56 Sequence=3 ttl=255 time=60 ms
Reply from 172.16.32.131: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 172.16.32.131: bytes=56 Sequence=5 ttl=255 time=30 ms
--- 172.16.32.131 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/76/210 ms
<r1>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ospf 1
[r1-ospf-1]ospf 1 rou
[r1-ospf-1]rout
[r1-ospf-1]route-id
[r1-ospf-1]route-id 1.1.1.1
^
Error: Unrecognized command found at '^' position.
[r1-ospf-1]ospf 1 rout
[r1-ospf-1]ospf 1 route-id 1.1.1.1
^
Error: Unrecognized command found at '^' position.
[r1-ospf-1]q
[r1]ospf 1 route-id 1.1.1.1
^
Error:Too many parameters found at '^' position.
[r1]ospf 1 router-id 1.1.1.1
Info: The configuration succeeded. You need to restart the OSPF process to valid
ate the new router ID.
[r1-ospf-1]ar
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]netw
[r1-ospf-1-area-0.0.0.1]network 172.16.0.0 0.0.0.0
[r1-ospf-1-area-0.0.0.1]network 172.16.0.0 0.0.255.255
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:03-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:03-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:35-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:36-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:36-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:36-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-ospf-1-area-0.0.0.1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>os
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ospf 1
[r1-ospf-1]ar
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]st
[r1-ospf-1-area-0.0.0.1]stub
Jun 6 2021 22:03:42-08:00 r1 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=1.1.1.1, NeighborEven
t=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 22:03:42-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=1.1.1.1, Neighbor
AreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate re
ason=Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Area reset, Nei
ghborChangeTime=2021-06-06 22:03:42-08:00)
[r1-ospf-1-area-0.0.0.1]q
[r1-ospf-1]q
[r1]
R5
Please press enter to start cmd line!
################################################################################
##################################################
<Huawei>
Jun 6 2021 19:59:23-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Jun 6 2021 19:59:31-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
<Huawei>
Jun 6 2021 19:59:38-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEt
hernet0/0/2 has turned into UP state.
<Huawei>
Jun 6 2021 19:59:46-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[3]:Interface GigabitEt
hernet4/0/0 has turned into UP state.
<Huawei>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<Huawei>
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]intef
[r4]in
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/0
[r4-GigabitEthernet0/0/0]ip add
[r4-GigabitEthernet0/0/0]ip address 34.1.1.2 24
Jun 6 2021 20:05:16-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r4-GigabitEthernet0/0/0]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 4/0/0
[r4-GigabitEthernet4/0/0]ip add
[r4-GigabitEthernet4/0/0]ip address 74.1.1.2 24
Jun 6 2021 20:05:47-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet4/0/0 has entered the UP state.
[r4-GigabitEthernet4/0/0]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/2
[r4-GigabitEthernet0/0/2]ip add 64.1.1.2 24
Jun 6 2021 20:06:13-08:00 r4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r4-GigabitEthernet0/0/2]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/1
[r4-GigabitEthernet0/0/1]ip add 54.1.1.2 24
[r4-GigabitEthernet0/0/1]
Jun 6 2021 20:06:40-08:00 r4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r4-GigabitEthernet0/0/1]q
[r4]interf
[r4]interface l
[r4]interface LoopBack o
^
Error: Wrong parameter found at '^' position.
[r4]interface LoopBack 0
[r4-LoopBack0]ip add 4.4.4.4
^
Error:Incomplete command found at '^' position.
[r4-LoopBack0]ip add 4.4.4.4 24
[r4-LoopBack0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]disp
[r4]display ip
[r4]display ipint
[r4]display ip inter
[r4]display ip interface b
[r4]display ip interface brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 6
The number of interface that is DOWN in Physical is 0
The number of interface that is UP in Protocol is 6
The number of interface that is DOWN in Protocol is 0
Interface IP Address/Mask Physical Protocol
GigabitEthernet0/0/0 34.1.1.2/24 up up
GigabitEthernet0/0/1 54.1.1.2/24 up up
GigabitEthernet0/0/2 64.1.1.2/24 up up
GigabitEthernet4/0/0 74.1.1.2/24 up up
LoopBack0 4.4.4.4/24 up up(s)
NULL0 unassigned up up(s)
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
R11
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r11
[r11]interf
[r11]interface g
[r11]interface GigabitEthernet 0/0/0
[r11-GigabitEthernet0/0/0]ip add 172.16.64.2 30
[r11-GigabitEthernet0/0/0]
Jun 6 2021 20:53:38-08:00 r11 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r11-GigabitEthernet0/0/0]q
[r11]interf
[r11]interface g
[r11]interface GigabitEthernet 0/0/1
[r11-GigabitEthernet0/0/1]ip add 172.16.64.5 30
Jun 6 2021 20:54:42-08:00 r11 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r11-GigabitEthernet0/0/1]q
[r11]interf
[r11]interface l
[r11]interface LoopBack 0
[r11-LoopBack0]ip add
[r11-LoopBack0]ip address 172.16.65.1 25
[r11-LoopBack0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r11>sys
Enter system view, return user view with Ctrl+Z.
[r11]ospf 1 rout
[r11]ospf 1 router-id 11.11.11.11
[r11-ospf-1]ar
[r11-ospf-1]area 2
[r11-ospf-1-area-0.0.0.2]nrtw
[r11-ospf-1-area-0.0.0.2]netw
[r11-ospf-1-area-0.0.0.2]network 172.16.0.0 0.0.255.255
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:40-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:48-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:48-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:48-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:48-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r11-ospf-1-area-0.0.0.2]q
[r11-ospf-1]q
[r11]dis
[r11]display osp
[r11]display ospf p
[r11]display ospf peer b
[r11]display ospf peer brief
OSPF Process 1 with Router ID 11.11.11.11
Peer Statistic Information
----------------------------------------------------------------------------
Area Id Interface Neighbor id State
0.0.0.2 GigabitEthernet0/0/1 12.12.12.12 Full
----------------------------------------------------------------------------
[r11]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r11>
<r11>sys
Enter system view, return user view with Ctrl+Z.
[r11]ospf 1
[r11-ospf-1]ar
[r11-ospf-1]area 2
[r11-ospf-1-area-0.0.0.2]na
[r11-ospf-1-area-0.0.0.2]ne
[r11-ospf-1-area-0.0.0.2]nssa
Jun 6 2021 22:05:27-08:00 r11 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=12.12.12.12, Neighbo
rEvent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 22:05:27-08:00 r11 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=12.12.12.12, Nei
ghborAreaId=33554432, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmedia
te reason=Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Area reset
, NeighborChangeTime=2021-06-06 22:05:27-08:00)
[r11-ospf-1-area-0.0.0.2]
R12
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r12
[r12]ip add 172.16.64.6 30
^
Error: Unrecognized command found at '^' position.
[r12]interf
[r12]interface g
[r12]interface GigabitEthernet 0/0/0
[r12-GigabitEthernet0/0/0]ip add
[r12-GigabitEthernet0/0/0]ip address 172.16.64.6 30
Jun 6 2021 20:55:45-08:00 r12 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r12-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r12>ys
^
Error: Unrecognized command found at '^' position.
<r12>sys
Enter system view, return user view with Ctrl+Z.
[r12]interf
[r12]interface l
[r12]interface LoopBack 0
[r12-LoopBack0]ip add 172.16.160.1 20
[r12-LoopBack0]q
[r12]interf
[r12]interface l
[r12]interface LoopBack 1
[r12-LoopBack1]ip add
[r12-LoopBack1]ip address 172.16.176.1 20
[r12-LoopBack1]
R1
The device is running!
<Huawei>
<Huawei>
<Huawei>SYS
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r1
[r1]interf
[r1]interface g
[r1]interface GigabitEthernet 0/0/0
[r1-GigabitEthernet0/0/0]ip add 172.16.32.129 29
Jun 6 2021 20:46:06-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]q
[r1]interf
[r1]interface l
[r1]interface LoopBack 0
[r1-LoopBack0]ip add 172.16.33.1 25
[r1-LoopBack0]q
[r1]q
<r1>ping 172.16.32.131
PING 172.16.32.131: 56 data bytes, press CTRL_C to break
Reply from 172.16.32.131: bytes=56 Sequence=1 ttl=255 time=210 ms
Reply from 172.16.32.131: bytes=56 Sequence=2 ttl=255 time=40 ms
Reply from 172.16.32.131: bytes=56 Sequence=3 ttl=255 time=60 ms
Reply from 172.16.32.131: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 172.16.32.131: bytes=56 Sequence=5 ttl=255 time=30 ms
--- 172.16.32.131 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/76/210 ms
<r1>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ospf 1
[r1-ospf-1]ospf 1 rou
[r1-ospf-1]rout
[r1-ospf-1]route-id
[r1-ospf-1]route-id 1.1.1.1
^
Error: Unrecognized command found at '^' position.
[r1-ospf-1]ospf 1 rout
[r1-ospf-1]ospf 1 route-id 1.1.1.1
^
Error: Unrecognized command found at '^' position.
[r1-ospf-1]q
[r1]ospf 1 route-id 1.1.1.1
^
Error:Too many parameters found at '^' position.
[r1]ospf 1 router-id 1.1.1.1
Info: The configuration succeeded. You need to restart the OSPF process to valid
ate the new router ID.
[r1-ospf-1]ar
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]netw
[r1-ospf-1-area-0.0.0.1]network 172.16.0.0 0.0.0.0
[r1-ospf-1-area-0.0.0.1]network 172.16.0.0 0.0.255.255
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:03-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:03-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:35-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:36-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:36-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 21:18:36-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=130.32.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-ospf-1-area-0.0.0.1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>os
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]ospf 1
[r1-ospf-1]ar
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]st
[r1-ospf-1-area-0.0.0.1]stub
Jun 6 2021 22:03:42-08:00 r1 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=1.1.1.1, NeighborEven
t=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r1-ospf-1-area-0.0.0.1]
Jun 6 2021 22:03:42-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=1.1.1.1, Neighbor
AreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate re
ason=Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Area reset, Nei
ghborChangeTime=2021-06-06 22:03:42-08:00)
[r1-ospf-1-area-0.0.0.1]q
[r1-ospf-1]q
[r1]
R5
Please press enter to start cmd line!
################################################################################
##################################################
<Huawei>
Jun 6 2021 19:59:23-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Jun 6 2021 19:59:31-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
<Huawei>
Jun 6 2021 19:59:38-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEt
hernet0/0/2 has turned into UP state.
<Huawei>
Jun 6 2021 19:59:46-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[3]:Interface GigabitEt
hernet4/0/0 has turned into UP state.
<Huawei>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<Huawei>
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]intef
[r4]in
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/0
[r4-GigabitEthernet0/0/0]ip add
[r4-GigabitEthernet0/0/0]ip address 34.1.1.2 24
Jun 6 2021 20:05:16-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r4-GigabitEthernet0/0/0]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 4/0/0
[r4-GigabitEthernet4/0/0]ip add
[r4-GigabitEthernet4/0/0]ip address 74.1.1.2 24
Jun 6 2021 20:05:47-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet4/0/0 has entered the UP state.
[r4-GigabitEthernet4/0/0]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/2
[r4-GigabitEthernet0/0/2]ip add 64.1.1.2 24
Jun 6 2021 20:06:13-08:00 r4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r4-GigabitEthernet0/0/2]q
[r4]interf
[r4]interface g
[r4]interface GigabitEthernet 0/0/1
[r4-GigabitEthernet0/0/1]ip add 54.1.1.2 24
[r4-GigabitEthernet0/0/1]
Jun 6 2021 20:06:40-08:00 r4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r4-GigabitEthernet0/0/1]q
[r4]interf
[r4]interface l
[r4]interface LoopBack o
^
Error: Wrong parameter found at '^' position.
[r4]interface LoopBack 0
[r4-LoopBack0]ip add 4.4.4.4
^
Error:Incomplete command found at '^' position.
[r4-LoopBack0]ip add 4.4.4.4 24
[r4-LoopBack0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]disp
[r4]display ip
[r4]display ipint
[r4]display ip inter
[r4]display ip interface b
[r4]display ip interface brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 6
The number of interface that is DOWN in Physical is 0
The number of interface that is UP in Protocol is 6
The number of interface that is DOWN in Protocol is 0
Interface IP Address/Mask Physical Protocol
GigabitEthernet0/0/0 34.1.1.2/24 up up
GigabitEthernet0/0/1 54.1.1.2/24 up up
GigabitEthernet0/0/2 64.1.1.2/24 up up
GigabitEthernet4/0/0 74.1.1.2/24 up up
LoopBack0 4.4.4.4/24 up up(s)
NULL0 unassigned up up(s)
[r4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
R11
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r11
[r11]interf
[r11]interface g
[r11]interface GigabitEthernet 0/0/0
[r11-GigabitEthernet0/0/0]ip add 172.16.64.2 30
[r11-GigabitEthernet0/0/0]
Jun 6 2021 20:53:38-08:00 r11 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r11-GigabitEthernet0/0/0]q
[r11]interf
[r11]interface g
[r11]interface GigabitEthernet 0/0/1
[r11-GigabitEthernet0/0/1]ip add 172.16.64.5 30
Jun 6 2021 20:54:42-08:00 r11 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r11-GigabitEthernet0/0/1]q
[r11]interf
[r11]interface l
[r11]interface LoopBack 0
[r11-LoopBack0]ip add
[r11-LoopBack0]ip address 172.16.65.1 25
[r11-LoopBack0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r11>sys
Enter system view, return user view with Ctrl+Z.
[r11]ospf 1 rout
[r11]ospf 1 router-id 11.11.11.11
[r11-ospf-1]ar
[r11-ospf-1]area 2
[r11-ospf-1-area-0.0.0.2]nrtw
[r11-ospf-1-area-0.0.0.2]netw
[r11-ospf-1-area-0.0.0.2]network 172.16.0.0 0.0.255.255
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:40-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:48-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:48-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:48-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 21:39:48-08:00 r11 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r11-ospf-1-area-0.0.0.2]q
[r11-ospf-1]q
[r11]dis
[r11]display osp
[r11]display ospf p
[r11]display ospf peer b
[r11]display ospf peer brief
OSPF Process 1 with Router ID 11.11.11.11
Peer Statistic Information
----------------------------------------------------------------------------
Area Id Interface Neighbor id State
0.0.0.2 GigabitEthernet0/0/1 12.12.12.12 Full
----------------------------------------------------------------------------
[r11]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r11>
<r11>sys
Enter system view, return user view with Ctrl+Z.
[r11]ospf 1
[r11-ospf-1]ar
[r11-ospf-1]area 2
[r11-ospf-1-area-0.0.0.2]na
[r11-ospf-1-area-0.0.0.2]ne
[r11-ospf-1-area-0.0.0.2]nssa
Jun 6 2021 22:05:27-08:00 r11 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=12.12.12.12, Neighbo
rEvent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r11-ospf-1-area-0.0.0.2]
Jun 6 2021 22:05:27-08:00 r11 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=12.12.12.12, Nei
ghborAreaId=33554432, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmedia
te reason=Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Area reset
, NeighborChangeTime=2021-06-06 22:05:27-08:00)
[r11-ospf-1-area-0.0.0.2]
R12
The device is running!
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r12
[r12]ip add 172.16.64.6 30
^
Error: Unrecognized command found at '^' position.
[r12]interf
[r12]interface g
[r12]interface GigabitEthernet 0/0/0
[r12-GigabitEthernet0/0/0]ip add
[r12-GigabitEthernet0/0/0]ip address 172.16.64.6 30
Jun 6 2021 20:55:45-08:00 r12 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r12-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r12>ys
^
Error: Unrecognized command found at '^' position.
<r12>sys
Enter system view, return user view with Ctrl+Z.
[r12]interf
[r12]interface l
[r12]interface LoopBack 0
[r12-LoopBack0]ip add 172.16.160.1 20
[r12-LoopBack0]q
[r12]interf
[r12]interface l
[r12]interface LoopBack 1
[r12-LoopBack1]ip add
[r12-LoopBack1]ip address 172.16.176.1 20
[r12-LoopBack1]
140
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
