路由实验7777777

最新推荐文章于 2024-05-28 20:49:56 发布
最新推荐文章于 2024-05-28 20:49:56 发布
阅读量6.9k 收藏 13
点赞数 14
分类专栏： ♥日常学习笔记 文章标签： 网络 csdn 网络协议
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/kaituozhizzz/article/details/121434198
版权

 写下地址，写地址，下一跳

<Huawei>sys
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname R1
[R1]inter
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]ip ad
[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 30
Nov 19 2021 23:05:06-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R1-GigabitEthernet0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R1>
<R1>
<R1>
<R1>sys
<R1>system-view 
Enter system view, return user view with Ctrl+Z.
[R1]int
[R1]interface g0/0/1
[R1-GigabitEthernet0/0/1]ip ad
[R1-GigabitEthernet0/0/1]ip address 192.168.1.21 30
Nov 19 2021 23:29:45-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R1-GigabitEthernet0/0/1]ip address 192.168.1.22 30
[R1-GigabitEthernet0/0/1]
Nov 19 2021 23:30:14-08:00 R1 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.100663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.33554432.100663296 ARP detects IP conflict. (IP address=22.1.168.192, Local interface=GigabitEthernet0/0/1, Local MAC=00e0-fce6-6b2d, Local vlan=0, Local CE vlan=0, Receive interface=GigabitEthernet0/0/1, Receive MAC=00e0-fcd1-6f46, Receive vlan=0, Receive CE vlan=0, IP conflict type=Local IP conflict). 
[R1-GigabitEthernet0/0/1]
Nov 19 2021 23:30:14-08:00 R1 %%01ARP/4/ARP_DUPLICATE_IPADDR(l)[1]:Received an ARP packet with a duplicate IP address from the interface. (IpAddress=22.1.168.192, InterfaceName=GigabitEthernet0/0/1, MacAddress=00e0-fcd1-6f46) 
[R1-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R1>
<R1>
<R1>int
<R1>sys  
<R1>system-view 
Enter system view, return user view with Ctrl+Z.
[R1]inter
[R1]interface loo
[R1]interface LoopBack 0
[R1-LoopBack0]ip ad
[R1-LoopBack0]ip address 192.168.1.33 28
[R1-LoopBack0]quit
[R1]int
[R1]interface lo
Nov 19 2021 23:50:24-08:00 R1 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.100663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.33554432.100663296 ARP detects IP conflict. (IP address=22.1.168.192, Local interface=GigabitEthernet0/0/1, Local MAC=00e0-fce6-6b2d, Local vlan=0, Local CE vlan=0, Receive interface=GigabitEthernet0/0/1, Receive MAC=00e0-fcd1-6f46, Receive vlan=0, Receive CE vlan=0, IP conflict type=Local IP conflict). 
[R1]interface look
[R1]interface loo 
[R1]interface LoopBack 1
[R1-LoopBack1]ip ad
[R1-LoopBack1]ip address 192.168.1.49 28
[R1-LoopBack1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R1>
<R1>
<R1>
<R1>
<R1>
<R1>
<R1>sys
<R1>system-view 
Enter system view, return user view with Ctrl+Z.
[R1]disp
[R1]display ip b
[R1]display ip bri
[R1]display ip brie
[R1]display ip brief
               ^
Error: Unrecognized command found at '^' position.
[R1]dis
[R1]display ip int
[R1]display ip interface b
[R1]display ip interface brief 
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 5
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 5
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.1.1/30       up         up        
GigabitEthernet0/0/1              192.168.1.22/30      up         up        
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         192.168.1.33/28      up         up(s)     
LoopBack1                         192.168.1.49/28      up         up(s)     
NULL0                             unassigned           up         up(s)     
[R1]dsi
[R1]dis
[R1]display ip r
[R1]display ip rd-filter
[R1]display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 16       Routes : 16       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
    192.168.1.0/30  Direct  0    0           D   192.168.1.1     GigabitEthernet0/0/0
    192.168.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
    192.168.1.3/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
   192.168.1.20/30  Direct  0    0           D   192.168.1.22    GigabitEthernet0/0/1
   192.168.1.22/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/1
   192.168.1.23/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/1
   192.168.1.32/28  Direct  0    0           D   192.168.1.33    LoopBack0
   192.168.1.33/32  Direct  0    0           D   127.0.0.1       LoopBack0
   192.168.1.47/32  Direct  0    0           D   127.0.0.1       LoopBack0
   192.168.1.48/28  Direct  0    0           D   192.168.1.49    LoopBack1
   192.168.1.49/32  Direct  0    0           D   127.0.0.1       LoopBack1
   192.168.1.63/32  Direct  0    0           D   127.0.0.1       LoopBack1
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R1>
<R1>
<R1>sys
<R1>system-view 
Enter system view, return user view with Ctrl+Z.
[R1]ip rou
[R1]ip route
[R1]ip route-static 192.168.1.4 30 192.168.1.2
[R1]ip rout
[R1]ip route
[R1]ip route-static 192.168.1.16 30 192.168.1.21 
[R1]ip rou  
[R1]ip route
[R1]ip route-static 192.168.1.8 30 192.168.1.2
[R1]ip route-static 192.168.1.8 30 192.168.1.21
[R1]ip rou
[R1]ip route
[R1]ip route-static 192.168.1.12 30 192.168.1.2
[R1]ip route-static 192.168.1.12 30 192.168.1.21
[R1]
Nov 20 2021 00:30:19-08:00 R1 %%01ARP/4/ARP_DUPLICATE_IPADDR(l)[0]:Received an ARP packet with a duplicate IP address from the interface. (IpAddress=22.1.168.192, InterfaceName=GigabitEthernet0/0/1, MacAddress=00e0-fcd1-6f46) 
[R1]
Nov 20 2021 00:30:44-08:00 R1 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.100663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.33554432.100663296 ARP detects IP conflict. (IP address=22.1.168.192, Local interface=GigabitEthernet0/0/1, Local MAC=00e0-fce6-6b2d, Local vlan=0, Local CE vlan=0, Receive interface=GigabitEthernet0/0/1, Receive MAC=00e0-fcd1-6f46, Receive vlan=0, Receive CE vlan=0, IP conflict type=Local IP conflict). 
[R1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R1>
<R1>
<R1>sys
<R1>system-view 
Enter system view, return user view with Ctrl+Z.
[R1]ip rou
[R1]ip route
[R1]ip route-static 192.168.1.64 27 192.168.1.2
[R1]ip rou
[R1]ip route
[R1]ip route-static 192.168.1.96 27 192.168.1.21
[R1]ip rout
[R1]ip route
[R1]ip route-static 192.168.1.128 27 192.168.1.2
[R1]ip route-static 192.168.1.128 27 192.168.1.21
[R1]
Nov 20 2021 01:30:20-08:00 R1 %%01ARP/4/ARP_DUPLICATE_IPADDR(l)[0]:Received an ARP packet with a duplicate IP address from the interface. (IpAddress=22.1.168.192, InterfaceName=GigabitEthernet0/0/1, MacAddress=00e0-fcd1-6f46) 
[R1]quit
<R1>dis
<R1>display c
<R1>display calibrate
<R1>display capwap
<R1>display channel
<R1>display clock
<R1>display config
<R1>display controller
<R1>display cpos
<R1>display cpu-defend
<R1>display cpu-usage
<R1>display current-configuration
Nov 20 2021 01:31:10-08:00 R1 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.100663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.33554432.100663296 ARP detects IP conflict. (IP address=22.1.168.192, Local interface=GigabitEthernet0/0/1, Local MAC=00e0-fce6-6b2d, Local vlan=0, Local CE vlan=0, Receive interface=GigabitEthernet0/0/1, Receive MAC=00e0-fcd1-6f46, Receive vlan=0, Receive CE vlan=0, IP conflict type=Local IP conflict). 
<R1>display current-configuration
[V200R003C00]
#
 sysname R1
#
 snmp-agent local-engineid 800007DB03000000000000
 snmp-agent 
#
 clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load portalpage.zip
#
 drop illegal-mac alarm
#
 set cpu-usage threshold 80 restore 75
#
aaa 
 authentication-scheme default
 authorization-scheme default
 accounting-scheme default
 domain default 
 domain default_admin 
 local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
 local-user admin service-type http
#
firewall zone Local                       
 priority 15                              
#                                         
interface GigabitEthernet0/0/0            
 ip address 192.168.1.1 255.255.255.252   
#                                         
interface GigabitEthernet0/0/1            
 ip address 192.168.1.22 255.255.255.252  
#                                         
interface GigabitEthernet0/0/2            
#                                         
interface NULL0                           
#                                         
interface LoopBack0                       
 ip address 192.168.1.33 255.255.255.240  
#                                         
interface LoopBack1                       
 ip address 192.168.1.49 255.255.255.240  
#                                         
ip route-static 192.168.1.4 255.255.255.252 192.168.1.2
ip route-static 192.168.1.8 255.255.255.252 192.168.1.2
ip route-static 192.168.1.8 255.255.255.252 192.168.1.21
ip route-static 192.168.1.12 255.255.255.252 192.168.1.2
ip route-static 192.168.1.12 255.255.255.252 192.168.1.21
ip route-static 192.168.1.16 255.255.255.252 192.168.1.21
ip route-static 192.168.1.64 255.255.255.224 192.168.1.2
ip route-static 192.168.1.96 255.255.255.224 192.168.1.21
ip route-static 192.168.1.128 255.255.255.224 192.168.1.2
ip route-static 192.168.1.128 255.255.255.224 192.168.1.21
#                                         
user-interface con 0                      
 authentication-mode password             
user-interface vty 0 4                    
user-interface vty 16 20                  
#                                         
wlan ac                                   
#                                         
return                                    
<R1>
<R1>
<R1>
<R1>
<R1>
<R1>
<R1>
<R1>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R1>save
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R1>
Nov 20 2021 02:01:25-08:00 R1 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.100663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.33554432.100663296 ARP detects IP conflict. (IP address=22.1.168.192, Local interface=GigabitEthernet0/0/1, Local MAC=00e0-fce6-6b2d, Local vlan=0, Local CE vlan=0, Receive interface=GigabitEthernet0/0/1, Receive MAC=00e0-fcd1-6f46, Receive vlan=0, Receive CE vlan=0, IP conflict type=Local IP conflict). 
<R1>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

R2

<Huawei>sys
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname R2
[R2]inter
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]ip ad
[R2-GigabitEthernet0/0/0]ip address 192.168.1.2 30
Nov 19 2021 23:05:54-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R2-GigabitEthernet0/0/0]quit
[R2]inter
[R2]interface g0/0/1
[R2-GigabitEthernet0/0/1]ip ad
[R2-GigabitEthernet0/0/1]ip address 192.168.1.5 30
Nov 19 2021 23:07:15-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R2-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>
<R2>
<R2>ping 192.168.1.1  
  PING 192.168.1.1: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.1: bytes=56 Sequence=1 ttl=255 time=100 ms
    Reply from 192.168.1.1: bytes=56 Sequence=2 ttl=255 time=40 ms
    Reply from 192.168.1.1: bytes=56 Sequence=3 ttl=255 time=10 ms
    Reply from 192.168.1.1: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 192.168.1.1: bytes=56 Sequence=5 ttl=255 time=30 ms

  --- 192.168.1.1 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/40/100 ms

<R2>ping 192.168.1.6
  PING 192.168.1.6: 56  data bytes, press CTRL_C to break
    Request time out
    Request time out
    Request time out
    Request time out
    Request time out

  --- 192.168.1.6 ping statistics ---
    5 packet(s) transmitted
    0 packet(s) received
    100.00% packet loss

<R2>ping 192.168.1.6 30
                     ^
Error:Too many parameters found at '^' position.
<R2>ping 192.168.1.6 30
                     ^
Error:Too many parameters found at '^' position.
<R2>
<R2>
<R2>
<R2>
<R2>
<R2>ping 192.168.1.1   
<R2>inter              
<R2>inter
<R2>sys  
<R2>system-view 
Enter system view, return user view with Ctrl+Z.
[R2]inter
[R2]interface g0/0/1
[R2-GigabitEthernet0/0/1]ip ad
[R2-GigabitEthernet0/0/1]ip address 192.168.1.5
                                                ^
Error:Incomplete command found at '^' position.
[R2-GigabitEthernet0/0/1]quit
[R2]ping 192.168.1.1
  PING 192.168.1.1: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.1: bytes=56 Sequence=1 ttl=255 time=10 ms
    Reply from 192.168.1.1: bytes=56 Sequence=2 ttl=255 time=30 ms
    Reply from 192.168.1.1: bytes=56 Sequence=3 ttl=255 time=10 ms
    Reply from 192.168.1.1: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 192.168.1.1: bytes=56 Sequence=5 ttl=255 time=20 ms

  --- 192.168.1.1 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/18/30 ms

[R2]ping 192.168
Error: Unknown host 192.168.
[R2]ping 192.168.1.5
  PING 192.168.1.5: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.5: bytes=56 Sequence=1 ttl=255 time=10 ms
    Reply from 192.168.1.5: bytes=56 Sequence=2 ttl=255 time=1 ms
    Reply from 192.168.1.5: bytes=56 Sequence=3 ttl=255 time=1 ms
    Reply from 192.168.1.5: bytes=56 Sequence=4 ttl=255 time=1 ms
    Reply from 192.168.1.5: bytes=56 Sequence=5 ttl=255 time=1 ms

  --- 192.168.1.5 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 1/2/10 ms

[R2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>
<R2>
<R2>sys
<R2>system-view 
Enter system view, return user view with Ctrl+Z.
[R2]int 
[R2]interface loo 
[R2]interface LoopBack 0
[R2-LoopBack0]ip ad
[R2-LoopBack0]ip address 192.168.1.65 28
[R2-LoopBack0]quit
[R2]int
[R2]interface loo
[R2]interface LoopBack 1
[R2-LoopBack1]ip 
[R2-LoopBack1]ip ad
[R2-LoopBack1]ip address 192.168.1.81 28
[R2-LoopBack1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>
<R2>
<R2>
<R2>sys
<R2>system-view 
Enter system view, return user view with Ctrl+Z.
[R2]ip route-static 192.168.1.4 255.255.255.252 192.168.1.2
Error: The next-hop address is invalid.
[R2]ip route-static 192.168.1.8 255.255.255.252 192.168.1.2
Error: The next-hop address is invalid.
[R2]ip route-static 192.168.1.8 255.255.255.252 192.168.1.21
[R2]ip route-static 192.168.1.12 255.255.255.252 192.168.1.2
Error: The next-hop address is invalid.
[R2]ip route-static 192.168.1.12 255.255.255.252 192.168.1.21
[R2]ip route-static 192.168.1.16 255.255.255.252 192.168.1.21
[R2]ip route-static 192.168.1.64 255.255.255.224 192.168.1.2
Error: The next-hop address is invalid.
[R2]ip route-static 192.168.1.96 255.255.255.224 192.168.1.21
[R2]ip route-static 192.168.1.128 255.255.255.224 192.168.1.2
Error: The next-hop address is invalid.
[R2]ip route-static 192.168.1.128 255.255.255.224 192.168.1.21
[R2]dis
[R2]display cu
[R2]display current-configuration 
[V200R003C00]
#
 sysname R2
#
 snmp-agent local-engineid 800007DB03000000000000
 snmp-agent 
#
 clock timezone China-Standard-Time minus 08:00:00
#
portal local-server load portalpage.zip
#
 drop illegal-mac alarm
#
 set cpu-usage threshold 80 restore 75
#
aaa 
 authentication-scheme default
 authorization-scheme default
 accounting-scheme default
 domain default 
 domain default_admin 
 local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$
 local-user admin service-type http
#
firewall zone Local                       
 priority 15                              
#                                         
interface GigabitEthernet0/0/0            
 ip address 192.168.1.2 255.255.255.252   
#                                         
interface GigabitEthernet0/0/1            
 ip address 192.168.1.5 255.255.255.252   
#                                         
interface GigabitEthernet0/0/2            
#                                         
interface NULL0                           
#                                         
interface LoopBack0                       
 ip address 192.168.1.65 255.255.255.240  
#                                         
interface LoopBack1                       
 ip address 192.168.1.81 255.255.255.240  
#                                         
ip route-static 192.168.1.8 255.255.255.252 192.168.1.21
ip route-static 192.168.1.12 255.255.255.252 192.168.1.21
ip route-static 192.168.1.16 255.255.255.252 192.168.1.21
ip route-static 192.168.1.96 255.255.255.224 192.168.1.21
ip route-static 192.168.1.128 255.255.255.224 192.168.1.21
#                                         
user-interface con 0                      
 authentication-mode password             
user-interface vty 0 4                    
user-interface vty 16 20                  
#                                         
wlan ac                                   
#                                         
return                                    
[R2]
[R2]
[R2]
[R2]
[R2]dis
[R2]display ip rou
[R2]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 16       Routes : 16       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
    192.168.1.0/30  Direct  0    0           D   192.168.1.2     GigabitEthernet0/0/0
    192.168.1.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
    192.168.1.3/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
    192.168.1.4/30  Direct  0    0           D   192.168.1.5     GigabitEthernet0/0/1
    192.168.1.5/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/1
    192.168.1.7/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/1
   192.168.1.64/28  Direct  0    0           D   192.168.1.65    LoopBack0
   192.168.1.65/32  Direct  0    0           D   127.0.0.1       LoopBack0
   192.168.1.79/32  Direct  0    0           D   127.0.0.1       LoopBack0
   192.168.1.80/28  Direct  0    0           D   192.168.1.81    LoopBack1
   192.168.1.81/32  Direct  0    0           D   127.0.0.1       LoopBack1
   192.168.1.95/32  Direct  0    0           D   127.0.0.1       LoopBack1
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R2]dis
[R2]display ip ro
[R2]display ip routing-table 
[R2]display ip routing-table p
[R2]display ip routing-table protocol st
[R2]display ip routing-table protocol static 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : Static
         Destinations : 5        Routes : 5        Configured Routes : 5

Static routing table status : <Active>
         Destinations : 0        Routes : 0

Static routing table status : <Inactive>
         Destinations : 5        Routes : 5

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

    192.168.1.8/30  Static  60   0               192.168.1.21    Unknown
   192.168.1.12/30  Static  60   0               192.168.1.21    Unknown
   192.168.1.16/30  Static  60   0               192.168.1.21    Unknown
   192.168.1.96/27  Static  60   0               192.168.1.21    Unknown
  192.168.1.128/27  Static  60   0               192.168.1.21    Unknown

[R2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>save
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R2>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>

<Huawei>
<Huawei>
<Huawei>
<Huawei>sys
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R33
[R33]3
     ^
Error: Unrecognized command found at '^' position.
[R33]sys
[R33]sysname R3
[R3]inter
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]ip ad
[R3-GigabitEthernet0/0/0]ip address 192.168.1.22 30
[R3-GigabitEthernet0/0/0]
Nov 19 2021 23:26:46-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]quit
[R3]int
[R3]interface g0/0/1
[R3-GigabitEthernet0/0/1]ip ad
[R3-GigabitEthernet0/0/1]ip address 192.168.1.18 30
Nov 19 2021 23:27:33-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R3-GigabitEthernet0/0/1]
Nov 19 2021 23:30:15-08:00 R3 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.100663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.33554432.100663296 ARP detects IP conflict. (IP address=22.1.168.192, Local interface=GigabitEthernet0/0/0, Local MAC=00e0-fcd1-6f46, Local vlan=0, Local CE vlan=0, Receive interface=GigabitEthernet0/0/0, Receive MAC=00e0-fce6-6b2d, Receive vlan=0, Receive CE vlan=0, IP conflict type=Local IP conflict). 
[R3-GigabitEthernet0/0/1]
Nov 19 2021 23:30:15-08:00 R3 %%01ARP/4/ARP_DUPLICATE_IPADDR(l)[2]:Received an ARP packet with a duplicate IP address from the interface. (IpAddress=22.1.168.192, InterfaceName=GigabitEthernet0/0/0, MacAddress=00e0-fce6-6b2d) 
[R3-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>
<R3>
<R3>
<R3>ping 192.168.1.5 30
                     ^
Error:Too many parameters found at '^' position.
<R3>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>
<R3> 
<R3>
<R3>
<R3>sys
<R3>system-view 
Enter system view, return user view with Ctrl+Z.
[R3]ping 192.168.1.21
  PING 192.168.1.21: 56  data bytes, press CTRL_C to break
    Request time out
    Request time out
    Request time out
    Request time out
    Request time out

  --- 192.168.1.21 ping statistics ---
    5 packet(s) transmitted
    0 packet(s) received
    100.00% packet loss

[R3]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>
<R3>
<R3>sys
<R3>system-view 
Enter system view, return user view with Ctrl+Z.
[R3]inter
[R3]interface loo
[R3]interface LoopBack 0
[R3-LoopBack0]ip ad
[R3-LoopBack0]ip address 192.168.1.97 28
[R3-LoopBack0]quit
[R3]int
[R3]interface loo
[R3]interface LoopBack 1
[R3-LoopBack1]ip ad
[R3-LoopBack1]ip address 192.168.1.113 28
[R3-LoopBack1]
Nov 20 2021 00:00:25-08:00 R3 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.100663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.33554432.100663296 ARP detects IP conflict. (IP address=22.1.168.192, Local interface=GigabitEthernet0/0/0, Local MAC=00e0-fcd1-6f46, Local vlan=0, Local CE vlan=0, Receive interface=GigabitEthernet0/0/0, Receive MAC=00e0-fce6-6b2d, Receive vlan=0, Receive CE vlan=0, IP conflict type=Local IP conflict). 
[R3-LoopBack1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>save
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R3>
Nov 20 2021 02:01:26-08:00 R3 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.100663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.33554432.100663296 ARP detects IP conflict. (IP address=22.1.168.192, Local interface=GigabitEthernet0/0/0, Local MAC=00e0-fcd1-6f46, Local vlan=0, Local CE vlan=0, Receive interface=GigabitEthernet0/0/0, Receive MAC=00e0-fce6-6b2d, Receive vlan=0, Receive CE vlan=0, IP conflict type=Local IP conflict). 
<R3>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>
<Huawei>sys
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R4
[R4]inter
[R4]interface g0/0/0
[R4-GigabitEthernet0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>
<R4>in
<R4>inter
<R4>sys  
<R4>system-view 
Enter system view, return user view with Ctrl+Z.
[R4]int
[R4]interface g0/0/0
[R4-GigabitEthernet0/0/0]ip ad
[R4-GigabitEthernet0/0/0]ip address 192
                                    ^
Error: Wrong parameter found at '^' position.
[R4-GigabitEthernet0/0/0]ip address 192.168.1.6 30
Nov 19 2021 23:17:12-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R4-GigabitEthernet0/0/0]quit
[R4]inter
[R4]interface g0/0/1
[R4-GigabitEthernet0/0/1]ipad
[R4-GigabitEthernet0/0/1]ip ad 
[R4-GigabitEthernet0/0/1]quit                
[R4]inter
[R4]interface g4/0/0
[R4-GigabitEthernet4/0/0]ip ad
[R4-GigabitEthernet4/0/0]ip address 192.168.1.9 30
[R4-GigabitEthernet4/0/0]
Nov 19 2021 23:19:32-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet4/0/0 has entered the UP state. 
[R4-GigabitEthernet4/0/0]quit
[R4]int  
[R4]interface g0/0/2
[R4-GigabitEthernet0/0/2]ip ad
[R4-GigabitEthernet0/0/2]ip address 192.168.1.14 30
[R4-GigabitEthernet0/0/2]
Nov 19 2021 23:23:04-08:00 R4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R4-GigabitEthernet0/0/2]quit
[R4]int
[R4]interface g0/0/0 
[R4-GigabitEthernet0/0/0]ip ad
[R4-GigabitEthernet0/0/0]ip address 192.168.1.17 30
[R4-GigabitEthernet0/0/0]
[R4-GigabitEthernet0/0/0]interface g0/0/1          
[R4-GigabitEthernet0/0/1]ip ad
[R4-GigabitEthernet0/0/1]ip address 192.168.1.17 30
Error: The specified address conflicts with another address.
[R4-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>
<R4>
<R4>
<R4>ping 192.168.1.10
  PING 192.168.1.10: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.10: bytes=56 Sequence=1 ttl=255 time=60 ms
    Reply from 192.168.1.10: bytes=56 Sequence=2 ttl=255 time=10 ms
    Reply from 192.168.1.10: bytes=56 Sequence=3 ttl=255 time=30 ms
    Reply from 192.168.1.10: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 192.168.1.10: bytes=56 Sequence=5 ttl=255 time=20 ms

  --- 192.168.1.10 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/28/60 ms

<R4>ping 192.?  
  STRING<1-255>  IP address or hostname of a remote system
<R4>ping 192.168.1.13
  PING 192.168.1.13: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.13: bytes=56 Sequence=1 ttl=255 time=10 ms
    Reply from 192.168.1.13: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 192.168.1.13: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 192.168.1.13: bytes=56 Sequence=4 ttl=255 time=10 ms
    Reply from 192.168.1.13: bytes=56 Sequence=5 ttl=255 time=30 ms

  --- 192.168.1.13 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/18/30 ms

<R4>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>
<R4>
<R4>
<R4>sys
<R4>system-view 
Enter system view, return user view with Ctrl+Z.
[R4]int
[R4]interface loo
[R4]interface LoopBack 0
[R4-LoopBack0]ip ad
[R4-LoopBack0]ip address 192.168.1.129 28
[R4-LoopBack0]quit
[R4]inter
[R4]interface loo
[R4]interface LoopBack 1
[R4-LoopBack1]ip ad
[R4-LoopBack1]ip address 192.168.1.145 28
[R4-LoopBack1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>save
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R4>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any ke

<Huawei>
<Huawei>
<Huawei>sys
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys
[Huawei]sysname R5
[R5]inter
[R5]interface g0/0/1
[R5-GigabitEthernet0/0/1]ip ad
[R5-GigabitEthernet0/0/1]ip address 192
                                    ^
Error: Wrong parameter found at '^' position.
[R5-GigabitEthernet0/0/1]ip address 192.168.1.10 30
Nov 19 2021 23:20:49-08:00 R5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R5-GigabitEthernet0/0/1]quit
[R5]inter
[R5]interface g0/0/0
[R5-GigabitEthernet0/0/0]ip ad
[R5-GigabitEthernet0/0/0]ip address 192.168.1.13 30
Nov 19 2021 23:21:54-08:00 R5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R5-GigabitEthernet0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R5>
<R5>
<R5>
<R5>ping 192.168.1.9
  PING 192.168.1.9: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.9: bytes=56 Sequence=1 ttl=255 time=20 ms
    Reply from 192.168.1.9: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 192.168.1.9: bytes=56 Sequence=3 ttl=255 time=10 ms
    Reply from 192.168.1.9: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 192.168.1.9: bytes=56 Sequence=5 ttl=255 time=10 ms

  --- 192.168.1.9 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/16/20 ms

<R5>quit

  Configuration console exit, please press any key to log on

<R5>
<R5>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R5>
<R5>
<R5>
<R5>sys
<R5>system-view 
Enter system view, return user view with Ctrl+Z.
[R5]inter
[R5]interface loo 
[R5]interface LoopBack 0
[R5-LoopBack0]ip ad
[R5-LoopBack0]ip address 5.5.5.5 28
[R5-LoopBack0]quit
[R5]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R5>save
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait.......
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R5>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

y to log on

kaituozhizzz
关注
  • 14
    点赞
  • 踩
  • 13
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 1
    评论
专栏目录
路由器1
shiqiang002的博客
04-02 5620
路由器 路由器的工作原理 路由表 路由器中维护的路由条目的集合 路由器根据路由表选择路径 路由表的形成 直连网段：配置IP地址，端口up状态，形成直连路由 非直连网段：需要静态路由或者动态路由将网段添加到路由表中 静态路由 手工配置，单向的，缺乏灵活性 可精准管理 默认路由 默认路由属于静态路由， 网段是0.0.0.0 0 当找不到对应的网段时，找默认路由转发数据 路由器的转发数据包封装过程 如图所示，通过路由器事项两个网段的PC4与PC5通信 第一步：PC4 ARP广播 静态路由配置 display
访问控制列表(ACL)
Yusheng9527的博客
10-21 1234
@TOC 作用 读取第三层和第四层包头信息 根据预先定义好的规则对包进行过滤 用来对数据包做访问控制 结合其他协议，用来匹配范围 通信4元素：源地址、目的地址、源端口、目的端口 + 协议=五元素 访问控制列表在接口应用的方向 出：已经经过路由器的处理，正在离开路由器的数据包 入：已经达到路由器接口的数据包，将被路由器处理 列表应用到接口的方向与数据关系有关 访问控制列表的处理过程 匹配第一条 发送到目的端口 匹配第二条 匹配第三条 丢弃 拒绝 如果两条都不匹配
静态路由实验.pkt
06-23
静态路由实验： 1.给各设备设置IP： 2.设置静态路由：ip route 目的地址 掩码 下一跳地址 RouterA(config)#ip route 192.168.3.0 255.255.255.0 192.168.2.2 RouterB(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.1 3.测试连通性
华为、华三、思科、锐捷交换机路由器设备命令行常见错误信息
最新发布
小木的博客
05-28 809
使用CLI命令行界面，如果输入错误，系统将会向用户报告错误信息。 知己知彼，方能百战不殆。下面是小木为大家收集整理的几大厂商常见的命令行错误提示。
静态路由实验
Sigefreedom的博客
01-04 749
静态路由实验
路由练习作业
newqian的博客
01-04 603
练习作业
rip动态路由实验.pkt
07-02
RIP动态路由实验：V1版本、V2版本（对有类路由进行汇总） ripV1：以每30秒一次的频率拷贝自己的路由表副本作为路由更新发送给其直连邻居，更新方式为直播，即以255.255.255.255为目的地址发送报文 ripV2：更新方式为...
静态路由实验.docx
06-23
在这个静态路由实验中，我们将深入理解静态路由的工作原理，配置过程以及如何验证其有效性。 首先，我们要明确实验的目标是通过设置静态路由来实现网络中的设备间通信。实验拓扑未在描述中给出，但从配置来看，我们...
RIP动态路由实验.docx
07-02
总结来说，RIP动态路由实验涵盖了RIPv1和RIPv2的基本配置和操作。RIPv1适用于简单网络，而RIPv2则更适合复杂网络，因为它提供了更好的子网支持和更高效的更新机制。理解这两种协议的差异和操作方式对于网络管理员来...
静态路由实验总结.docx
07-24
静态路由实验总结 静态路由是指在路由器中配置的静态路由表项，用于指导数据包的转发。静态路由实验是计算机网络实验中的一种重要实验，旨在验证静态路由的配置和应用。 知识点一：静态路由的概念 静态路由是指在...
动态路由实验总结.docx
07-24
"动态路由实验总结" 本实验总结了动态路由实验的整个过程，包括实验准备、实验过程和心得体会三个部分。实验中使用了 RIP 和 OSPF 两个协议，配置了四个路由器和两个主机，进行了 IP 地址的配置、 RIP 协议的配置和...
组网实例教程（非常经典的教材）
01-03
有配套的组网例子，非常值得推荐。这个是我见过最好的一个了。需要的进来下了。
2021-01-28
StriverNumber1的博客
01-28 1443
HCIA 寒假静态路由 1、R1—R4均有两个环回 R1 192.168.1.49/32 Direct 0 0 D 127.0.0.1 LoopBack0 192.168.1.63/32 Direct 0 0 D 127.0.0.1 LoopBack0 192.168.1.64/27 Direct 0 0 D 192.168.1.65 LoopBack1 192.168.1.6
路由原理及配置
NSD1907的博客
05-20 889
什么是路由 路由器的功能：连接不同的网段，把数据从不同的网段进行传递 如何获得路由表 直连路由实列 配置方法 配置0口 system-view 进入系统试图 Enter system view, return user view with Ctrl+Z. [Huawei]interface GigabitEthernet 0/0/0 进入接口试图 [Huawei-GigabitEthernet0/0/0]ip address 192.168.1.254 255.255.255.0 配置0口IP地址 M
ENSP之静态、缺省路由的配置实验
m0_53662978的博客
03-11 8466
一、学习目标 掌握静态路由的配置方法； 掌握测试静态路由连通性的方法； 掌握通过配置缺省路由实现本地网络访问外部网络； 掌握静态备份路由的配置方法； 二、实验前的准备 1. 拓扑图： 2. ENSP版本： 3. 路由器S1、S2、S3 型号：S2220 三、实验步骤： 1. 在R1、R2、R3上配置接口ip地址以及回环口地址 <Huawei>system-view Enter system view, return user view with Ctrl.
网络实验实例
想成功，靠自己
12-28 1602
网络实验实例实验题需求：全网互通思路：LSW7LSW8LSW5LSW6R5R6正常情况下通信结果：断开路由器之间G口后的通信测试 实验题 需求：全网互通 思路： 双侧单臂路由 MSTP多实例生成树，选择指定的Vlan通过主端口，避免环路产生 静态路由 优先级的选择 LSW7 The device is running! <Huawei>undo te mo Info: Current terminal monitor is off. <Huawei>sys Ente
华为设备配置Telnet与SSH服务实现运程连接网络设备
Hades_Ling的CSDN博客
11-27 3123
华为设备、telnet、ssh、ensp、ensp串口号、crt、hcia
学习HCIA得第二节---------远程登录
qq_62466609的博客
03-27 276
学习HCIA得第二节---------远程登录。
静态路由配置
qq_69770925的博客
08-15 1342
静态路由
路由实验全攻略：从基础配置到动态路由
"这篇文档是关于路由实验的综合总结，涵盖了路由器的基本配置、单臂路由、静态路由、RIP（V1和V2版本）、OSPF动态路由、路由再发布实验，以及访问控制列表（ACL）、NAT（静态、动态和NAPT）的配置实践。" 在路由器...
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

kaituozhizzz

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值