2021-06-09

 

 

R1

The device is running!

 

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sysname r1

[r1]interf

[r1]interface g

[r1]interface GigabitEthernet 0/0/0

[r1-GigabitEthernet0/0/0]ip add 12.1.1.1 24

Jun  9 2021 18:19:20-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP

on the interface GigabitEthernet0/0/0 has entered the UP state.

[r1-GigabitEthernet0/0/0]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r1>

<r1>sys

Enter system view, return user view with Ctrl+Z.

[r1]interg

[r1]inter

[r1]interface g

[r1]interface l

[r1]interface LoopBack 0

[r1-LoopBack0]ip add 1.1.1.1 24

[r1-LoopBack0]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r1>sys

Enter system view, return user view with Ctrl+Z.

[r1]bgp 1

[r1-bgp]rout

[r1-bgp]route-id 1.1.1.1

        ^

Error: Unrecognized command found at '^' position.

[r1-bgp]route-s

[r1-bgp]route-select

                     ^

Error:Incomplete command found at '^' position.

[r1-bgp]route-select

                     ^

Error:Incomplete command found at '^' position.

[r1-bgp]rou

[r1-bgp]route-select

                     ^

Error:Incomplete command found at '^' position.

[r1-bgp]bg

[r1-bgp]q

[r1]bg

[r1]bgp 1

[r1-bgp]router-i

[r1-bgp]router-id 1.1.1.1

[r1-bgp]p

[r1-bgp]peer 12.1.1.2 as

[r1-bgp]peer 12.1.1.2 as-nu

[r1-bgp]peer 12.1.1.2 as-number 2

[r1-bgp]q

[r1]disp

[r1]display bgp p

[r1]display bgp r

[r1]display bgp routing-table

[r1]

Jun  9 2021 19:29:18-08:00 r1 %%01BGP/3/STATE_CHG_UPDOWN(l)[0]:The status of the

 peer 12.1.1.2 changed from OPENCONFIRM to ESTABLISHED. (InstanceName=Public, St

ateChangeReason=Up)  

[r1]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r1>

<r1>sys

Enter system view, return user view with Ctrl+Z.

[r1]bgp 1

[r1-bgp]netw

[r1-bgp]network 1.1.1.0 24

[r1-bgp]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r1>

<r1>sys

Enter system view, return user view with Ctrl+Z.

[r1]disp

[r1]display bg

[r1]display bgp  ro

[r1]display bgp  routing-table

 

 BGP Local router ID is 1.1.1.1

 Status codes: * - valid, > - best, d - damped,

               h - history,  i - internal, s - suppressed, S - Stale

               Origin : i - IGP, e - EGP, ? - incomplete

 

 

 Total Number of Routes: 2

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 

 *>   1.1.1.0/24         0.0.0.0         0                     0      i

 *>   5.5.5.0/24         12.1.1.2                              0      2 3i

[r1]q

<r1>ping -a 1.1.1.1 5.5.5.5

  PING 5.5.5.5: 56  data bytes, press CTRL_C to break

    Reply from 5.5.5.5: bytes=56 Sequence=1 ttl=252 time=100 ms

    Reply from 5.5.5.5: bytes=56 Sequence=2 ttl=252 time=60 ms

    Reply from 5.5.5.5: bytes=56 Sequence=3 ttl=252 time=60 ms

    Reply from 5.5.5.5: bytes=56 Sequence=4 ttl=252 time=50 ms

    Reply from 5.5.5.5: bytes=56 Sequence=5 ttl=252 time=50 ms

 

  --- 5.5.5.5 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 50/64/100 ms

 

<r1>sys

Enter system view, return user view with Ctrl+Z.

[r1]dis

[r1]display bgp r

[r1]display bgp routing-table

 

 BGP Local router ID is 1.1.1.1

 Status codes: * - valid, > - best, d - damped,

               h - history,  i - internal, s - suppressed, S - Stale

               Origin : i - IGP, e - EGP, ? - incomplete

 

 

 Total Number of Routes: 3

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 

 *>   1.1.1.0/24         0.0.0.0         0                     0      i

 *>   2.2.2.0/24         12.1.1.2        0                     0      2i

 *>   5.5.5.0/24         12.1.1.2                              0      2 3i

[r1]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

 

R3

<r3>

<r3>

<r3>sys

Enter system view, return user view with Ctrl+Z.

[r3]disp

[r3]display ip

[r3]display ip in

[r3]display ip interface  b

[r3]display ip interface  brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 4

The number of interface that is DOWN in Physical is 1

The number of interface that is UP in Protocol is 3

The number of interface that is DOWN in Protocol is 2

 

Interface                         IP Address/Mask      Physical   Protocol  

GigabitEthernet0/0/0              23.1.1.2/24          up         up        

GigabitEthernet0/0/1              unassigned           up         down      

GigabitEthernet0/0/2              unassigned           down       down      

LoopBack0                         3.3.3.3/24           up         up(s)     

NULL0                             unassigned           up         up(s)     

[r3]interf

[r3]interface g

[r3]interface GigabitEthernet 0/0/1

[r3-GigabitEthernet0/0/1]ip add 34.1.1.1 24

[r3-GigabitEthernet0/0/1]

Jun  9 2021 18:47:03-08:00 r3 %%01IFNET/4/LINK_STATE(l)[7]:The line protocol IP

on the interface GigabitEthernet0/0/1 has entered the UP state.

[r3-GigabitEthernet0/0/1]

Jun  9 2021 18:47:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve

nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.34, NeighborE

vent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[r3-GigabitEthernet0/0/1]

Jun  9 2021 18:47:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve

nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.34, NeighborE

vent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[r3-GigabitEthernet0/0/1]

Jun  9 2021 18:47:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.34, Neighbor

Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[r3-GigabitEthernet0/0/1]

Jun  9 2021 18:47:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.34, Neighbor

Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha

nge)

[r3-GigabitEthernet0/0/1]

Jun  9 2021 18:47:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.34, Neighbor

Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading

)

[r3-GigabitEthernet0/0/1]

Jun  9 2021 18:47:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.34, Neighbor

Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[r3-GigabitEthernet0/0/1]

[r3-GigabitEthernet0/0/1]

[r3-GigabitEthernet0/0/1]q

[r3]disp

[r3]display os

[r3]display ospf p

[r3]display ospf peer b

[r3]display ospf peer brief

 

 OSPF Process 1 with Router ID 3.3.3.3

  Peer Statistic Information

 ----------------------------------------------------------------------------

 Area Id          Interface                        Neighbor id      State    

 0.0.0.0          GigabitEthernet0/0/0             2.2.2.2          Full        

 0.0.0.0          GigabitEthernet0/0/1             4.4.4.4          Full        

 ----------------------------------------------------------------------------

[r3]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r3>

<r3>sys

Enter system view, return user view with Ctrl+Z.

[r3]bgp 2

[r3-bgp]router-i

[r3-bgp]router-id 3.3.3.3

[r3-bgp]per

[r3-bgp]pe

[r3-bgp]peer 2.2.2.2 as-n

[r3-bgp]peer 2.2.2.2 as-number 2

[r3-bgp]p

[r3-bgp]peer 2.2.2.2 co

[r3-bgp]peer 2.2.2.2 connect-interface l

[r3-bgp]peer 2.2.2.2 connect-interface LoopBack 0

[r3-bgp]q

[r3]peer 2.2.2.2 connect-interface LoopBack 0

    ^

Error: Unrecognized command found at '^' position.

[r3]bgp

[r3]bgp 2

[r3-bgp]rout

[r3-bgp]router-i

[r3-bgp]router-id 3.3.

Jun  9 2021 19:32:17-08:00 r3 %%01BGP/3/STATE_CHG_UPDOWN(l)[0]:The status of the

 peer 2.2.2.2 changed from OPENCONFIRM to ESTABLISHED. (InstanceName=Public, Sta

teChangeReason=Up)  

[r3-bgp]router-id 3.3.3.3

[r3-bgp]per

[r3-bgp]pe

[r3-bgp]peer 4.4.4.4 as

[r3-bgp]peer 4.4.4.4 as-number 2

[r3-bgp]peer 4.4.4.4 c

[r3-bgp]peer 4.4.4.4 connect-interface l

[r3-bgp]peer 4.4.4.4 connect-interface LoopBack 0

[r3-bgp]

Jun  9 2021 19:34:54-08:00 r3 %%01BGP/3/STATE_CHG_UPDOWN(l)[1]:The status of the

 peer 4.4.4.4 changed from OPENCONFIRM to ESTABLISHED. (InstanceName=Public, Sta

teChangeReason=Up)  

[r3-bgp]q

[r3]disp

[r3]display bgp p

[r3]display bgp pe

[r3]display bgp peer b

[r3]display bgp peer

 

 BGP local router ID : 3.3.3.3

 Local AS number : 2

 Total number of peers : 2   Peers in established state : 2

 

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State Pre

fRcv

 

  2.2.2.2         4           2        5        5     0 00:03:19 Established    

   0

  4.4.4.4         4           2        2        4     0 00:00:41 Established    

   0

[r3]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r3>

<r3>sys

Enter system view, return user view with Ctrl+Z.

[r3]disp

[r3]display b

[r3]display bg

[r3]display bgp  r

[r3]display bgp  routing-table

 

 BGP Local router ID is 3.3.3.3

 Status codes: * - valid, > - best, d - damped,

               h - history,  i - internal, s - suppressed, S - Stale

               Origin : i - IGP, e - EGP, ? - incomplete

 

 

 Total Number of Routes: 1

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 

   i  1.1.1.0/24         12.1.1.1        0          100        0      1i

[r3]display bgp routing-table

 

 BGP Local router ID is 3.3.3.3

 Status codes: * - valid, > - best, d - damped,

               h - history,  i - internal, s - suppressed, S - Stale

               Origin : i - IGP, e - EGP, ? - incomplete

 

 

 Total Number of Routes: 1

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 

   i  1.1.1.0/24         12.1.1.1        0          100        0      1i

[r3]

[r3]display bgp routing-table

 

 BGP Local router ID is 3.3.3.3

 Status codes: * - valid, > - best, d - damped,

               h - history,  i - internal, s - suppressed, S - Stale

               Origin : i - IGP, e - EGP, ? - incomplete

 

 

 Total Number of Routes: 1

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 

   i  1.1.1.0/24         12.1.1.1        0          100        0      1i

[r3]display bgp routing-table

 

 BGP Local router ID is 3.3.3.3

 Status codes: * - valid, > - best, d - damped,

               h - history,  i - internal, s - suppressed, S - Stale

               Origin : i - IGP, e - EGP, ? - incomplete

 

 

 Total Number of Routes: 1

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 

 *>i  1.1.1.0/24         2.2.2.2         0          100        0      1i

[r3]bgp 2

[r3-bgp]peer 4.4.4.4 ne

[r3-bgp]peer 4.4.4.4 next-

[r3-bgp]peer 4.4.4.4 next-hop-local

[r3-bgp]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r3>

<r3>sys

Enter system view, return user view with Ctrl+Z.

[r3]bgp

[r3]dis

[r3]displaybg

[r3]display

[r3]display  bg

[r3]display  bgp r

[r3]display  bgp routing-table

 

 BGP Local router ID is 3.3.3.3

 Status codes: * - valid, > - best, d - damped,

               h - history,  i - internal, s - suppressed, S - Stale

               Origin : i - IGP, e - EGP, ? - incomplete

 

 

 Total Number of Routes: 3

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 

 *>i  1.1.1.0/24         2.2.2.2         0          100        0      1i

 *>i  2.2.2.0/24         2.2.2.2         0          100        0      i

 *>i  5.5.5.0/24         4.4.4.4         0          100        0      3i

[r3]bgp 2

[r3-bgp]netw

[r3-bgp]network 3.3.3.0 24

[r3-bgp]q

[r3]q

<r3>ping -a 3.3.3.3 5.5.5.5

  PING 5.5.5.5: 56  data bytes, press CTRL_C to break

    Reply from 5.5.5.5: bytes=56 Sequence=1 ttl=254 time=50 ms

    Reply from 5.5.5.5: bytes=56 Sequence=2 ttl=254 time=40 ms

    Reply from 5.5.5.5: bytes=56 Sequence=3 ttl=254 time=20 ms

    Reply from 5.5.5.5: bytes=56 Sequence=4 ttl=254 time=30 ms

    Reply from 5.5.5.5: bytes=56 Sequence=5 ttl=254 time=30 ms

 

  --- 5.5.5.5 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 20/34/50 ms

 

<r3>

 

R5

The device is running!

 

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sysname r5

[r5]interf

[r5]interface g

[r5]interface GigabitEthernet 0/0/0

[r5-GigabitEthernet0/0/0]ip add

[r5-GigabitEthernet0/0/0]ip address 45.1.1.2 24

Jun  9 2021 18:23:29-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP

on the interface GigabitEthernet0/0/0 has entered the UP state.

[r5-GigabitEthernet0/0/0]q

[r5]interf

[r5]interface g

[r5]interface GigabitEthernet 0/0/1

[r5-GigabitEthernet0/0/1]ip add 54.1.1.2 24

Jun  9 2021 18:23:54-08:00 r5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP

on the interface GigabitEthernet0/0/1 has entered the UP state.

[r5-GigabitEthernet0/0/1]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r5>

<r5>sys

Enter system view, return user view with Ctrl+Z.

[r5]interf

[r5]interface l

[r5]interface LoopBack 0

[r5-LoopBack0]ip add 5.5.5.5 24

[r5-LoopBack0]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r5>

<r5>sys

Enter system view, return user view with Ctrl+Z.

[r5]ip rou

[r5]ip route-s

[r5]ip route-static 4.4.4.0 24 45.1.1.1

[r5]ip route-static 4.4.4.0 24 54.1.1.1

[r5]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r5>

<r5>sys

Enter system view, return user view with Ctrl+Z.

[r5]bgp 3

[r5-bgp]rou

[r5-bgp]router-i

[r5-bgp]router-id 5.5.5.5

[r5-bgp]p

[r5-bgp]peer 4.4.4.4 p

[r5-bgp]peer 4.4.4.4 as-n

[r5-bgp]peer 4.4.4.4 as-number 2

[r5-bgp]pee

[r5-bgp]peer  4.4.4.4 c

[r5-bgp]peer  4.4.4.4 co

[r5-bgp]peer  4.4.4.4 connect-interface l

[r5-bgp]peer  4.4.4.4 connect-interface LoopBack 0

[r5-bgp]p

[r5-bgp]peer 4.4.4.4 ex

[r5-bgp]peer 4.4.4.4 bg

[r5-bgp]peer 4.4.4.4 eb

[r5-bgp]peer 4.4.4.4 ebgp-max-hop 2

[r5-bgp]

Jun  9 2021 19:48:02-08:00 r5 %%01BGP/3/STATE_CHG_UPDOWN(l)[0]:The status of the

 peer 4.4.4.4 changed from OPENCONFIRM to ESTABLISHED. (InstanceName=Public, Sta

teChangeReason=Up)  

[r5-bgp]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r5>ys

    ^

Error: Unrecognized command found at '^' position.

<r5>sys

Enter system view, return user view with Ctrl+Z.

[r5]diss

[r5]dis

[r5]display bgp p

[r5]display bgp ro

[r5]display bgp routing-table

 

 BGP Local router ID is 5.5.5.5

 Status codes: * - valid, > - best, d - damped,

               h - history,  i - internal, s - suppressed, S - Stale

               Origin : i - IGP, e - EGP, ? - incomplete

 

 

 Total Number of Routes: 1

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 

 *>   1.1.1.0/24         4.4.4.4                               0      2 1i

[r5]bgp 3

[r5-bgp]netw

[r5-bgp]network 5.5.5.0 24

[r5-bgp]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r5>

<r5>sys

Enter system view, return user view with Ctrl+Z.

[r5]dsi

[r5]dis

[r5]display bg

[r5]display bgp r

[r5]display bgp routing-table

 

 BGP Local router ID is 5.5.5.5

 Status codes: * - valid, > - best, d - damped,

               h - history,  i - internal, s - suppressed, S - Stale

               Origin : i - IGP, e - EGP, ? - incomplete

 

 

 Total Number of Routes: 3

      Network            NextHop        MED        LocPrf    PrefVal Path/Ogn

 

 *>   1.1.1.0/24         4.4.4.4                               0      2 1i

 *>   2.2.2.0/24         4.4.4.4                               0      2i

 *>   5.5.5.0/24         0.0.0.0         0                     0      i

[r5]