BGP联邦 宣告

最新推荐文章于 2023-08-13 21:28:11 发布
最新推荐文章于 2023-08-13 21:28:11 发布
阅读量247 收藏 1
点赞数
分类专栏： 笔记 文章标签： 安全
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/m0_56229717/article/details/118003633
版权

r1

 

nide 

 

 

R1

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2
[r2]interf    
[r2]interface g    
[r2]interface GigabitEthernet 0/0/0
[r2-GigabitEthernet0/0/0]ip add 12.1.1.2 24
[r2-GigabitEthernet0/0/0]
Jun 17 2021 21:40:35-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]q
[r2]interf    
[r2]interface g    
[r2]interface GigabitEthernet 0/0/1
[r2-GigabitEthernet0/0/1]ip add 23.1.1.1 24
Jun 17 2021 21:41:03-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]q
[r2]interf    
[r2]interface l    
[r2]interface LoopBack 0
[r2-LoopBack0]ip add 172.16.2.2
                                ^
Error:Incomplete command found at '^' position.
[r2-LoopBack0]ip add 172.16.2.2 24
[r2-LoopBack0]q
[r2]interf    
[r2]interface g    
[r2]interface GigabitEthernet 0/0/1
[r2-GigabitEthernet0/0/1]undo ip add
Jun 17 2021 21:42:16-08:00 r2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the DOWN state. 
[r2-GigabitEthernet0/0/1]ip add    
[r2-GigabitEthernet0/0/1]ip address 172.16.0.1 30
Jun 17 2021 21:42:48-08:00 r2 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]disp    
[r2-GigabitEthernet0/0/1]display this    
[r2-GigabitEthernet0/0/1]display this 
[V200R003C00]
#
interface GigabitEthernet0/0/1
 ip address 172.16.0.1 255.255.255.252 
#
return
[r2-GigabitEthernet0/0/1]w
                           ^
Error:Incomplete command found at '^' position.
[r2-GigabitEthernet0/0/1]q
[r2]interf    
[r2]interface g    
[r2]interface GigabitEthernet 0/0/0
[r2-GigabitEthernet0/0/0]ip add 172.16.0.9 30
[r2-GigabitEthernet0/0/0]q
[r2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r2>
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]bgp 64512
[r2-bgp]rou    
[r2-bgp]router-id 2.2.2.2
[r2-bgp]confe    
[r2-bgp]confederation id 2
[r2-bgp]con    
[r2-bgp]confederation peer-as 64513
[r2-bgp]peer 12.1.1.1 as-nu    
[r2-bgp]peer 12.1.1.1 as-number 1
[r2-bgp]peer 172.16.3.3 as-num    
[r2-bgp]peer 172.16.3.3 as-number 65412
[r2-bgp]peer 172.16.3.3 l    
[r2-bgp]peer 172.16.3.3 con    
[r2-bgp]peer 172.16.3.3 connect-interface l    
[r2-bgp]peer 172.16.3.3 connect-interface LoopBack 0
[r2-bgp]peer 172.16.3.3 nex    
[r2-bgp]peer 172.16.3.3 next-hop-l    
[r2-bgp]peer 172.16.3.3 next-hop-local 
[r2-bgp]peer 172.16.5.5 as-n    
[r2-bgp]peer 172.16.5.5 as-number 65413
[r2-bgp]peer 172.16.5.5 con    
[r2-bgp]peer 172.16.5.5 connect-interface l    
[r2-bgp]peer 172.16.5.5 connect-interface LoopBack 0
[r2-bgp]peer 172.16.5.5 eb    
[r2-bgp]peer 172.16.5.5 ebgp-max-hop 2
[r2-bgp]peer 172.16.5.5 nex    
[r2-bgp]peer 172.16.5.5 next-hop-lo    
[r2-bgp]peer 172.16.5.5 next-hop-local 
[r2-bgp]netw    
[r2-bgp]network 172.16
                ^
Error: Wrong parameter found at '^' position.
[r2-bgp]q
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]are    
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]netw    
[r2-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
[r2-ospf-1-area-0.0.0.0]q
[r2-ospf-1]q
[r2]ip rou    
[r2]ip route-s    
[r2]ip route-static 172.16.0.0 0.0.255.255 0 null
                                           ^
Error: Wrong parameter found at '^' position.
[r2]ip route-static 172.16.0.0 0.0.255.255 0 null0
                                           ^
Error: Wrong parameter found at '^' position.
[r2]ip route-static 172.16.0.0 0.0.255.248.0 null0
                               ^
Error: Wrong parameter found at '^' position.
[r2]ip route-static 172.16.0.0 255.255.248.0 null0
[r2]
Jun 17 2021 22:14:22-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.16.172, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r2]
Jun 17 2021 22:14:23-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.16.172, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart) 
[r2]
Jun 17 2021 22:14:23-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.16.172, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r2]
Jun 17 2021 22:14:23-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.16.172, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r2]
Jun 17 2021 22:14:23-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.0.16.172, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

R3

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r3
[r3]interf    
[r3]interface g    
[r3]interface GigabitEthernet 0/0/0
[r3-GigabitEthernet0/0/0]ip add 172.16.0.2 30
[r3-GigabitEthernet0/0/0]
Jun 17 2021 21:48:18-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]q
[r3]interf    
[r3]interface g    
[r3]interface GigabitEthernet 0/0/1
[r3-GigabitEthernet0/0/1]ip add 172.16.0.5 30
Jun 17 2021 21:48:56-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r3-GigabitEthernet0/0/1]q
[r3]interf    
[r3]interface l    
[r3]interface LoopBack 0
[r3-LoopBack0]ip add 172.16.3.3 24
[r3-LoopBack0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r3>
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]ar    
[r3-ospf-1]area0
           ^
Error: Unrecognized command found at '^' position.
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]netw    
[r3-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
[r3-ospf-1-area-0.0.0.0]
Jun 17 2021 22:14:24-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.16.172, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r3-ospf-1-area-0.0.0.0]
Jun 17 2021 22:14:24-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.16.172, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) q
[r3-ospf-1-area-0.0.0.0]
Jun 17 2021 22:14:24-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.16.172, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r3-ospf-1-area-0.0.0.0]q
Jun 17 2021 22:14:24-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.16.172, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange) 
[r3-ospf-1-area-0.0.0.0]q
Jun 17 2021 22:14:24-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.16.172, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g) 
[r3-ospf-1-area-0.0.0.0]q
Jun 17 2021 22:14:24-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.0.16.172, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r3-ospf-1-area-0.0.0.0]q
[r3-ospf-1]q
[r3]bgp 2
[r3-bgp]q
[r3]bgp 65412
Error: BGP is already running. The AS is 2.
[r3]undo bgp 2
Warning: All BGP configurations will be deleted. Continue? [Y/N]: y
[r3]bgp 65412
[r3-bgp]rou    
[r3-bgp]router-id 3.3.3.3
[r3-bgp]con    
[r3-bgp]confederation id 2
[r3-bgp]peer 172.16.2.2 as-nu    
[r3-bgp]peer 172.16.2.2 as-number 65412
[r3-bgp]peer 172.16.2.2 con    
[r3-bgp]peer 172.16.2.2 connect-interface l    
[r3-bgp]peer 172.16.2.2 connect-interface LoopBack 0
[r3-bgp]peer 172.16.4.4 con    
[r3-bgp]peer 172.16.4.4 connect-interface l    
[r3-bgp]peer 172.16.4.4 connect-interfa
                                        ^
Error:Incomplete command found at '^' position.
[r3-bgp]peer 172.16.4.4 as-n    
[r3-bgp]peer 172.16.4.4 as-number 65412
[r3-bgp]peer 172.16.4.4 con    
[r3-bgp]peer 172.16.4.4 connect-interface l    
[r3-bgp]peer 172.16.4.4 connect-interface LoopBack 0
[r3-bgp]peer 172.16.2.2 ref    
[r3-bgp]peer 172.16.2.2 reflect-client 
[r3-bgp]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r3>
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]dis     
[r3]display bg    
[r3]display bgp r    
[r3]display bgp routing-table 
[r3]disp    
[r3]display bg    
[r3]display bgp p    
[r3]display bgp peer    
[r3]display bgp peer b    
[r3]display bgp peer 

 BGP local router ID : 3.3.3.3
 Local AS number : 65412
 Total number of peers : 2          Peers in established state : 0

  Peer            V          AS  MsgRcvd  MsgSent  OutQ  Up/Down       State Pre
fRcv

  172.16.2.2      4       65412        0        0     0 00:00:16        Idle    
   0
  172.16.4.4      4       65412        0        0     0 00:19:30        Idle    
   0
[r3]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

R7

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r7
[r7]interf    
[r7]interface g    
[r7]interface GigabitEthernet 0/0/0
[r7-GigabitEthernet0/0/0]ip add 172.16.0.18 30
Jun 17 2021 21:54:24-08:00 r7 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r7-GigabitEthernet0/0/0]q
[r7]interf    
[r7]interface g    
[r7]interface GigabitEthernet 0/0/1
[r7-GigabitEthernet0/0/1]ip add 172.16.0.22 30
Jun 17 2021 21:54:47-08:00 r7 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r7-GigabitEthernet0/0/1]q
[r7]interf    
[r7]interface l    
[r7]interface LoopBack 0
[r7-LoopBack0]ip add 172.16.7.7 24
[r7-LoopBack0]q
[r7]interf    
[r7]interface g    
[r7]interface GigabitEthernet 0/0/2
[r7-GigabitEthernet0/0/2]ip add 78.1.1.1 24
Jun 17 2021 21:57:06-08:00 r7 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[r7-GigabitEthernet0/0/2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<r7>
<r7>
<r7>sys
Enter system view, return user view with Ctrl+Z.
[r7]bgp 65413
[r7-bgp]con    
[r7-bgp]confederation id 2
[r7-bgp]con    
[r7-bgp]confederation peer-as 65412
[r7-bgp]peer 172.16.6.6 as-nu    
[r7-bgp]peer 172.16.6.6 as-number 65413
[r7-bgp]peer 172.16.6.6 con    
[r7-bgp]peer 172.16.6.6 connect-interface l    
[r7-bgp]peer 172.16.6.6 connect-interface LoopBack 0
[r7-bgp]peer 172.16.4.4 as-nu    
[r7-bgp]peer 172.16.4.4 as-number 65412
[r7-bgp]peer 172.16.4.4 con    
[r7-bgp]peer 172.16.4.4 connect-interface l    
[r7-bgp]peer 172.16.4.4 connect-interface LoopBack 0
[r7-bgp]peer 172.16.4.4 ebg    
[r7-bgp]peer 172.16.4.4 ebgp-max-hop 2
[r7-bgp]peer 172.16.4.4 nex    
[r7-bgp]peer 172.16.4.4 next-hop-l
[r7-bgp]peer 172.16.6.6 nxt    
[r7-bgp]peer 172.16.6.6 nex    
[r7-bgp]peer 172.16.6.6 next-hop-local
[r7-bgp]peer 78.1.1.2 as-n    
[r7-bgp]peer 78.1.1.2 as-number 3
[r7-bgp]q
[r7]ospf 1 routre-id 7.7.7.7
           ^
Error:Too many parameters found at '^' position.
[r7]ospf 1 router-id 7.7.7.7
[r7-ospf-1]ar    
[r7-ospf-1]area 0
[r7-ospf-1-area-0.0.0.0]net
Jun 17 2021 22:36:54-08:00 r7 %%01BGP/3/STATE_CHG_UPDOWN(l)[0]:The status of the
 peer 78.1.1.2 changed from OPENCONFIRM to ESTABLISHED. (InstanceName=Public, St
ateChangeReason=Up)  
[r7-ospf-1-area-0.0.0.0]netw    
[r7-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
[r7-ospf-1-area-0.0.0.0]q
[r7-ospf-1]
Jun 17 2021 22:37:14-08:00 r7 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=17.0.16.172, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r7-ospf-1]
Jun 17 2021 22:37:14-08:00 r7 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=17.0.16.172, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r7-ospf-1]
Jun 17 2021 22:37:14-08:00 r7 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=17.0.16.172, Neighb
orEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r7-ospf-1]
Jun 17 2021 22:37:14-08:00 r7 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=17.0.16.172, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange) 
[r7-ospf-1]
Jun 17 2021 22:37:14-08:00 r7 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=17.0.16.172, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng) 
[r7-ospf-1]
Jun 17 2021 22:37:14-08:00 r7 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=17.0.16.172, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 
[r7-ospf-1]
Jun 17 2021 22:37:35-08:00 r7 %%01BGP/3/STATE_CHG_UPDOWN(l)[7]:The status of the
 peer 172.16.6.6 changed from OPENCONFIRM to ESTABLISHED. (InstanceName=Public, 
StateChangeReason=Up)  
[r7-ospf-1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on
 

 

m0_56229717
关注
  • 0
    点赞
  • 踩
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
CISCO BGP 联邦和反射
04-22
CISCO BGP 联邦和反射 实验目的： 1通过反射器解决IBGP建立过多邻居的问题 2 通过AS联邦实现IBGP邻居过多的问题
GRE网络配置
qq_50665872的博客
01-14 1908
R1的配置： Reply from 15.1.1.2: bytes=56 Sequence=5 ttl=255 time=20 ms --- 15.1.1.2 ping statistics --- 5 packet(s) transmitted 5 packet(s) received 0.00% packet loss round-trip min/avg/max = 20/22/30 ms [R1-Serial4/0/0] Pleas...
BGP实验
huaz_md的博客
08-13 385
除R5的5.5.5.0环回外，其他所有的环回均可互相访问。
CCNP的BGP部分笔记
m0_47505062的博客
06-21 1081
CCNP之BGP笔记
华为——路由故障排错
weixin_34355881的博客
01-24 1593
今天给大家带来一个排错实验： 拓扑图： 原有配置如下： pc1 pc2 pc3 pc4 SW1 SW2 SW3 SW4 R1 R2 排错思路： ~~1.检查终端设备~~ 检查IP地址，子网掩码，网关是否配置正确 通过上图pc1可以看出，pc1未配置网关；pc2获取IP地址为DHCP获取，而本拓扑中并没有提到设置了DHCP服务器；pc3配置正确；pc4网关写成了192.168....
数据链路层 抓包观察 以太网 PPP HDLC数据链路层封装
小楼一夜听春雨，深巷明朝卖杏花
10-10 1359
[Huawei]display interface Serial 2/0/0 Serial2/0/0 current state : UP Line protocol current state : UP Last line protocol up time : 2021-10-10 16:15:22 UTC-08:00 Description:HUAWEI, AR Series, Serial2/0/0 Interface Route Port,The Maximum Transmit Unit...
BGP宣告路由测试
12-20
### BGP宣告路由测试知识点详解 #### 一、BGP（Border Gateway Protocol）与OSPF（Open Shortest Path First）的交互场景分析 在给定的案例中，我们主要关注两种网络配置情况，并通过这两种场景来理解BGP路由宣告...
BGP联邦和团体配置
12-04
### BGP联邦与团体配置详解 #### 实验背景与目标 本实验旨在通过构建一个包含BGP联邦（BGP Confederation）与BGP团体（BGP Communities）的网络环境，来深入理解这两种特性的工作原理及其配置方法。实验设计了一个...
联邦的基础配置实验案例
最新发布
07-01
联邦的基础配置实验案例
BGP.rar_BGP
09-21
7. **MED（多出口度量）**：AS对外宣告路由时的偏好度量，影响外部AS的路径选择。 8. **Local Pref（本地优先级）**：AS内部选择最佳出口的依据，不影响其他AS。 **BGP路由选择过程：** 1. **路由起源（Origin）**...
BGP边界网关路由协议
qq_64746086的博客
08-10 67
由于5.5.5.5网段用于建邻 且有静态路由指向5.5.5.5 去5.5.5.5是为了建立bgp 如果需要用bgp传递5.5.5.5 这样会出现悖论 导致5.5.5.5 24这一网段无法传输。在一上查看 发现路由器的路径都为优选但是没有到4.4.4.4的路由 这是由于2号路由器上没有R4的路由 原因是由于在ibgp内部 存在水平分割机制 导致。理由是当2号路由或者三号路由把这一路由传递过来的时候没有把下一跳改成自己所导致的。然后配置igp 内部路由 我们的as2采用ospf协议。
思科|实验|配置基本BGP
weixin_45635831的博客
09-20 7664
思科
配置BGP 过程中最容易出现的问题。及解决方案！
weixin_33948416的博客
03-07 1274
在配置过程中最容易出现的问题！ 往往是很简单、很容易的问题，我们大家常常会忽略， 在配置过程中容易把配置中 peer 192.168.34.4 as-number 64513 配置成65413。 解决方案：在R3或R4中开启debugging 强力建议在真机中不要使用 debugging <R3/R4> terminal mo...
简单的BGPF实验
Uma_lagrima的博客
01-24 440
IP配置： R1 r1]int g 0/0/0 [r1-GigabitEthernet0/0/0]ip ad 12.0.0.1 24 [r1-GigabitEthernet0/0/0]int l0 [r1-LoopBack0]ip ad 192.168.1.1 24 [r1-LoopBack0]int l1 [r1-LoopBack1]ip ad 10.0.0.1 24 R2 Huawei]int g 0/0/0 [Huawei-GigabitEthernet0/0/0]ip ad 12.0...
关于BGP的notification错误码的解释
Jian Sun_的博客
09-12 4231
在BGP协议中，一种报文叫做notification，当BGP邻居关系断开，会发送notification消息，里面会包含一些错误码，有关错误码的解释 Error Code and Error Subcode NO 类型 错误码 中文（非必要） 1 报文头 0 　 2 1/1 连接未
BGP学习笔记2--配置指令
weixin_33709364的博客
09-04 245
一、配置指令 Router(config)# router bgp autonomous-system 该命令，在没有进入子命令界面进一步配置的情况下，并没有让BGP进程运作起来. 自治系统号用来鉴定路由器所属的AS 自治系统号在邻居状态中通过比较用于确定邻居是内部还是外部邻居关系. 要连接到其他AS，必须配置BGP命令。 1、启动BGP路由选择进程 2、指定邻...
多点双向重发布小实验
qq_46635171的博客
01-22 91
题目： 1.根据题干做出拓扑图： 1.配置IP和环回接口（略） 2.宣布 [r1]rip 1 [r1-rip-1]ver 2 [r1-rip-1]net [r1-rip-1]network 1.0.0.0 [r1-rip-1]net [r1-rip-1]network 12.0.0.0 [r1-rip-1]net [r1-rip-1]network 13.0.0.0 [r2]rip 1 [r2-rip-1]ver 2 [r2-rip-1]net [r2-rip-1]networ
HCIP------BGP2
W981113的博客
01-29 383
[r1]int loo0 [r1-LoopBack0]ip add 192.168.1.1 24 [r1-LoopBack0]int loo1 [r1-LoopBack1]ip add 10.1.1.1 24 [r1-LoopBack1]int g0/0/0 [r1-GigabitEthernet0/0/0]ip add 12.1.1.1 24 Jan 29 2021 20:20:30-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP ..
apt-mirror is already running（已运行）错误解决方案
weixin_34363171的博客
12-17 861
运行sudo apt-mirror却无法启动服务了。而是给出了一行错误提示信息：               apt-mirror is already running, exiting at /usr/bin/apt-mirrir lin 187 造成这种故障的原因是非正常终止了apt-mirror，或者apt-mirror没 有同步完数据，而客户按下了Ctrl+C强行中断了数据同步，而造成a...
BGP宣告环回口地址
10-08
例如，将环回口地址配置为一个/32的网络地址，并使用该网络地址作为BGP宣告。 2. 使用网络中的其他地址 如果在网络中已经存在其他地址，可以使用其中一个地址作为环回口地址，并将其宣告给BGP邻居。这样，BGP邻居...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值