部分代码
r1
0 packet(s) received
100.00% packet loss
[r1-Serial4/0/0]ping 15.1.1.2
Jul 8 2021 17:56:27-08:00 r1 %%01IFNET/4/LINK_STATE(l)[13]:The line protocol PP
P on the interface Serial4/0/0 has entered the UP state.
[r1-Serial4/0/0]ping 15.1.1.2
Jul 8 2021 17:56:27-08:00 r1 %%01IFNET/4/LINK_STATE(l)[14]:The line protocol PP
P IPCP on the interface Serial4/0/0 has entered the UP state.
[r1-Serial4/0/0]ping 15.1.1.2
PING 15.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 15.1.1.2: bytes=56 Sequence=1 ttl=255 time=10 ms
Reply from 15.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 15.1.1.2: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 15.1.1.2: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 15.1.1.2: bytes=56 Sequence=5 ttl=255 time=30 ms
--- 15.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 10/20/30 ms
[r1-Serial4/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]interf
[r1]interface g
[r1]interface GigabitEthernet 0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.1.0 24
Error: The specified IP address is invalid.
[r1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
Jul 8 2021 18:47:03-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]q
[r1]interf
[r1]interface t
[r1]interface Tunnel 0/0/0
[r1-Tunnel0/0/0]ip add 10.1.1.1 24
[r1-Tunnel0/0/0]tun
[r1-Tunnel0/0/0]tunnel-protocol g
[r1-Tunnel0/0/0]tunnel-protocol gre
[r1-Tunnel0/0/0]sou
[r1-Tunnel0/0/0]source 15.1.1.1
[r1-Tunnel0/0/0]de
[r1-Tunnel0/0/0]dest
[r1-Tunnel0/0/0]destination 45.1.1.1
Jul 8 2021 18:50:54-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[r1-Tunnel0/0/0]
[r1-Tunnel0/0/0]ping 10.1.1.2
PING 10.1.1.2: 56 data bytes, press CTRL_C to break
Request time out
Reply from 10.1.1.2: bytes=56 Sequence=2 ttl=255 time=50 ms
Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=255 time=30 ms
--- 10.1.1.2 ping statistics ---
5 packet(s) transmitted
4 packet(s) received
20.00% packet loss
round-trip min/avg/max = 30/37/50 ms
[r1-Tunnel0/0/0]q
[r1]interf
[r1]interface t
[r1]interface Tunnel 0/0/1
[r1-Tunnel0/0/1]ip add 10.1.2.1 24
[r1-Tunnel0/0/1]tun
[r1-Tunnel0/0/1]tunnel-protocol g
[r1-Tunnel0/0/1]tunnel-protocol gre pm
[r1-Tunnel0/0/1]tunnel-protocol gre mp
[r1-Tunnel0/0/1]tunnel-protocol gre p2
[r1-Tunnel0/0/1]tunnel-protocol gre p2mp
[r1-Tunnel0/0/1]sou
[r1-Tunnel0/0/1]source 15.1.1.1
Jul 8 2021 18:54:26-08:00 r1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface Tunnel0/0/1 has entered the UP state.
[r1-Tunnel0/0/1]
[r1-Tunnel0/0/1]nhrp en
[r1-Tunnel0/0/1]nhrp entry mu
[r1-Tunnel0/0/1]nhrp entry multicast dy
[r1-Tunnel0/0/1]nhrp entry multicast dynamic
[r1-Tunnel0/0/1]nhrp net
[r1-Tunnel0/0/1]nhrp network-id 100
[r1-Tunnel0/0/1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>
<r1>
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]rip 1
[r1-rip-1]ver
[r1-rip-1]versi
[r1-rip-1]version 2
[r1-rip-1]undo su
[r1-rip-1]undo summary
[r1-rip-1]netw
[r1-rip-1]network 10.0.0.0
[r1-rip-1]net
[r1-rip-1]network 192.168.1.0
[r1-rip-1]
[r1-rip-1]
[r1-rip-1]q
[r1]dis
[r1]display rip
[r1]display rip
Public VPN-instance
RIP process : 1
RIP version : 2
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Disabled
Host-route : Enabled
Maximum number of balanced paths : 8
Update time : 30 sec Age time : 180 sec
Garbage-collect time : 120 sec
Graceful restart : Disabled
BFD : Disabled
Silent-interfaces : None
Default-route : Disabled
Verify-source : Enabled
Networks :
192.168.1.0 10.0.0.0
Configured peers : None
Number of routes in database : 7
Number of interfaces enabled : 3
Triggered updates sent : 5
Number of route changes : 3
Number of replies to queries : 3
Number of routes in ADV DB : 6
Total count for 1 process :
Number of routes in database : 7
Number of interfaces enabled : 3
Number of routes sendable in a periodic update : 21
Number of routes sent in last periodic update : 15
[r1]
[r1]
[r1]
[r1]dis
[r1]display ip p
[r1]display ip pro
[r1]display ip rou
[r1]display ip routing-table bro
[r1]display ip routing-table pro
[r1]display ip routing-table protocol rip
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : RIP
Destinations : 3 Routes : 3
RIP routing table status : <Active>
Destinations : 3 Routes : 3
Destination/Mask Proto Pre Cost Flags NextHop Interface
192.168.2.0/24 RIP 100 1 D 10.1.2.2 Tunnel0/0/1
192.168.4.0/24 RIP 100 1 D 10.1.1.2 Tunnel0/0/0
192.168.6.0/24 RIP 100 1 D 10.1.2.3 Tunnel0/0/1
RIP routing table status : <Inactive>
Destinations : 0 Routes : 0
[r1]interf
[r1]interface t
[r1]interface Tunnel 0/0/1
[r1-Tunnel0/0/1]undo rip sp
[r1-Tunnel0/0/1]undo rip split-horizon
[r1-Tunnel0/0/1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>
<r1>
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]acl-200
^
Error: Unrecognized command found at '^' position.
[r1]acl-2000
^
Error: Unrecognized command found at '^' position.
[r1]acl 2000
[r1-acl-basic-2000]ru
[r1-acl-basic-2000]rule per
[r1-acl-basic-2000]rule permit 192.168.1.0 0.0.0.255
^
Error:Too many parameters found at '^' position.
[r1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[r1-acl-basic-2000]q
[r1]interf
[r1]interface ser
[r1]interface Serial 4/0/0
[r1-Serial4/0/0]nat ou
[r1-Serial4/0/0]nat outbound 2000
[r1-Serial4/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
截图