马林固件最新版本翻译注释
/*==============================================================================
Marlin Firmware 马林固件
(c) 2011-2020 MarlinFirmware
Portions of Marlin are (c) by their respective authors. 马林部分程序来源于世界各地的开发者
All code complies with GPLv2 and/or GPLv3 所有源码依靠GPLv2 和 GPLv3架构编写
================================================================================
Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware.
大家好! 感谢大家选择马林固件作为你的3D打印机硬件驱动固件。
To configure Marlin you must edit Configuration.h and Configuration_adv.h
located in the root 'Marlin' folder. Check our Configurations repository to
see if there's a more suitable starting-point for your specific hardware.
通过马林固件你可以自行编辑结构库文件和高级结构库文件,他