GSV6702

Gscoolink GSV6702 is a high-performance, low-power 2 In to 1 Out HDMI 2.1 repeater.

By integrating enhanced microcontroller based on RISC-V, GSV6702 has created a

cost-effective solution that provides time-to-market advantages. HDMI Receiver and

HDMI Transmitter support up to 48Gbps (FRL, 12G/4Lane). The superior architecture of

GSV6702 provides economical smaller footprint solutions using QFN88, targeting

applications of Consumer Switch and KVM.

HDCP 1.4 and HDCP 2.2/2.3 are implemented in GSV6702 for its all HDMI ports in HDMI

2.0 and FRL mode. Color Space Conversion is supported at HDMI Tx in HDMI 2.0 mode.

Flexible implementations of Audio Insertion, Audio Extraction and SPDIF to I2S

conversion features are supported in GSV6702. Embedded CEC and eARC Rx engine

enable downstream ARC/eARC to I2S and SPDIF audio extraction features.

An internal Video Generator can be used to generate any uncompressed video timing

defined in HDMI 2.1, such as 8K@30Hz, 4K@120Hz, 480i@60Hz.

1.2.1 HDMI Receiver

 Compliant with HDMI 2.1, HDMI 2.0b, HDMI 1.4b

 Compliant with HDCP 2.2/2.3 and HDCP 1.4 in repeater/receiver mode

 Data rate up to 48Gbps (FRL 12Gbps/4 Lane)

 Programmable Adaptive Equalization

 Support High Dynamic Range (HDR) and Dynamic/Static Metadata

 Support Variable Refresh Rate (VRR), FreeSync, G-Sync

 Support ALLM

 Support Forward Error Correction (FEC)

 Support DSC pass-through for compressed input timing

 Embedded arbitrary EDID (up to 512 bytes)

 5V tolerance on DDC/HPD pins

1.2.2 HDMI Transmitter

 Compliant with HDMI 2.1a, HDMI 2.0b, HDMI 1.4b

 Compliant with HDCP 2.2/2.3 and HDCP 1.4

 Data rate up to 48Gbps (FRL 12Gbps/4 Lane)

 Programmable Voltage Swing, Slew-Rate and Pre-emphasis

 Support AC-coupling on TMDS input/output

 Support Color Space Converter in TMDS mode

 Support HDR (HDR10/HDR10+/Dolby Vision/HLG)

 Support Variable Refresh Rate (VRR), FreeSync, G-Sync

 Support ALLM

 Support DSC encoded stream pass-through from HDMI/DP input GSV6702 Preliminary Product Specification

Rev. v0.1

7

 Hardware CEC Engine for Low Level protocol decoding

 5V tolerance on DDC/HPD/CEC pins

 Support eARC Rx to I2S/SPDIF audio extraction in HDMI 2.1a

1.2.3 Audio Input/Output

 I2S and SPDIF Audio Extraction from DisplayPort Rx/HDMI Rx/Type-C Rx

 I2S and SPDIF Audio Extraction from downstream ARC /eARC

 I2S/SPDIF Audio Insertion to HDMI Tx

 SPDIF/I2S/HBR/DSD/TDM Format Supported for Audio Extraction and Insertion

 SPDIF to I2S Conversion using single Bi-directional TTL bus