华为Ensp聚合链路

构建实验拓扑图

实验思路：下面4个vlan分别网关都指向三层交换机LSW1，其余分别做聚合链路,这里R1路由器的IP写在聚合链路上，连接R1路由器的三层交换机IP写在vlan上，最后使用Rip通告，实现全网互通。

IP配置省略

LSW1配置

[Huawei]vl batch 10 20 30 40 50          //同时创建多个vlan

[Huawei]int vl 10                //进入vlan   10

[Huawei-Vlanif10]ip add 1.1.1.1 24                 // 给vlan 10 写入对应的IP，作为网关

[Huawei-Vlanif10]int vl 20

[Huawei-Vlanif20]ip add 2.1.1.1 24

[Huawei-Vlanif20]int vl 30

[Huawei-Vlanif30]ip add 3.1.1.1 24

[Huawei-Vlanif30]int vl 40

[Huawei-Vlanif40]ip add 4.1.1.1 24

[Huawei-Vlanif40]int vl 50

[Huawei-Vlanif50]ip add 5.1.1.1 24

[Huawei-Vlanif40]q

[Huawei]int g0/0/1                //进入0/1接口

[Huawei-GigabitEthernet0/0/1]port link ac                //绑定接口类型为access接入链路

[Huawei-GigabitEthernet0/0/1]port de vl 10                //接口划分vlan  10

[Huawei-GigabitEthernet0/0/1]q

[Huawei]int Eth-Trunk 1                //创建编号为1的聚合

[Huawei-Eth-Trunk1]trunkport g 0/0/4 to 0/0/6        //划分g 0/0/4 ~ 0/0/6 为聚合的链路

[Huawei-Eth-Trunk1]port link tr            //将聚合进行trunk快速通过

[Huawei-Eth-Trunk1]port tr al vl al                //并允许通过所有vlan

[Huawei-Eth-Trunk1]q

[Huawei]rip                //宣告Rip路由协议

[Huawei-rip-1]version 2                  //更改Rip版本为2      

[Huawei-rip-1]un summ                //关闭自动汇总

[Huawei-rip-1]net 1.0.0.0                //宣告路由器直连的网段

[Huawei-rip-1]net 2.0.0.0        

[Huawei-rip-1]net 3.0.0.0

[Huawei-rip-1]net 4.0.0.0

[Huawei-rip-1]net 5.0.0.0

[Huawei-rip-1]q

[Huawei]int Eth-Trunk 2

[Huawei-Eth-Trunk2]trunkport g 0/0/2 to 0/0/3

[Huawei-Eth-Trunk2]port link-type access

[Huawei-Eth-Trunk2]port default vlan 50                //将接口划分vlan 50

LSW2配置

[Huawei]vl batch 10 20 30 40 50

[Huawei]int g0/0/1

[Huawei-GigabitEthernet0/0/1]port link ac

[Huawei-GigabitEthernet0/0/1]port de vl 20

[Huawei-GigabitEthernet0/0/1]int g0/0/2

[Huawei-GigabitEthernet0/0/2]port link ac

[Huawei-GigabitEthernet0/0/2]port de vl 30

[Huawei-GigabitEthernet0/0/2]int g0/0/3

[Huawei-GigabitEthernet0/0/3]port link ac

[Huawei-GigabitEthernet0/0/3]port de vl 40

[Huawei-GigabitEthernet0/0/3]q

[Huawei]int Eth-Trunk 1

[Huawei-Eth-Trunk1]trunkport g 0/0/4 to 0/0/6

[Huawei-Eth-Trunk1]port link tr

[Huawei-Eth-Trunk1]port tr al vl al

R1配置

[Huawei]int Eth-Trunk 2

[Huawei-Eth-Trunk2]undo portswitch                //关闭二层转发功能

[Huawei-Eth-Trunk2]trunkport g 0/0/1 to 0/0/2

[Huawei-Eth-Trunk2]ip add 5.1.1.2 24

[Huawei]int Eth-Trunk 3

[Huawei-Eth-Trunk3]undo portsw

[Huawei-Eth-Trunk3]trunkport g 3/0/0

[Huawei-Eth-Trunk3]trunkport g 4/0/0

[Huawei-Eth-Trunk3]ip add 6.1.1.1 24

[Huawei-Eth-Trunk3]q

[Huawei]rip

[Huawei-rip-1]version 2

[Huawei-rip-1]un summary

[Huawei-rip-1]net 5.0.0.0

[Huawei-rip-1]net 6.0.0.0

R2配置

[Huawei]int Eth-Trunk 3

[Huawei-Eth-Trunk3]undo portsw

[Huawei-Eth-Trunk3]trunkport g 0/0/1 to 0/0/2

[Huawei-Eth-Trunk3]ip add 6.1.1.2 24

[Huawei-Eth-Trunk3]q

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]ip add 7.1.1.1 24

[Huawei-GigabitEthernet0/0/0]q

[Huawei]rip

[Huawei-rip-1]version 2

[Huawei-rip-1]un summ

[Huawei-rip-1]net 7.0.0.0

[Huawei-rip-1]net 6.0.0.0

[Huawei-rip-1]q