STM32F030K6T6定时器6使用方法

贴代码

10us定时

void TIM6_INIT_Config(void)                                                 
{
	TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;              
	NVIC_InitTypeDef NVIC_InitStructure;     
	RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE);  


	TIM_TimeBaseStructure.TIM_Period = 9;                          
	TIM_TimeBaseStructure.TIM_Prescaler = 47;                        
	TIM_TimeBaseStructure.TIM_ClockDivision = 1;                     
	TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;   
	TIM_TimeBaseInit(TIM6, &TIM_TimeBaseStructure);             

	NVIC_InitStructure.NVIC_IRQChannel = TIM6_IRQn;              
	NVIC_InitStructure.NVIC_IRQChannelPriority = 0;                   
	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;         
	NVIC_Init(&NVIC_InitStructure);                                              

	TIM_ClearFlag(TIM6, TIM_FLAG_Update);                             

//	TIM_ARRPreloadConfig(TIM3, DISABLE);                               
                      
	TIM_Cmd(TIM6, ENABLE);                                               
	TIM_ITConfig(TIM6,TIM_IT_Update, ENABLE); 
}

中断代码

void TIM6_IRQHandler(void)
{
    if (TIM_GetITStatus(TIM6, TIM_IT_Update) != RESET)
    {


        TIM_ClearITPendingBit(TIM6, TIM_IT_Update); //清除更新中断标志位
    }
}

注意需要在stm32f0xx.h头文件里添加 TIM6_IRQn = 17

有了就不用添加

 

全局搜索TIM3_IRQHandler

在startup_stm32f030.s添加

                DCD     TIM6_IRQHandler                ; TIM6

                EXPORT  TIM3_IRQHandler                [WEAK]
                EXPORT  TIM6_IRQHandler                [WEAK]