1、R2为ISP,其上只能配置IP地址;
2、R1-R2之间为HDLC封装;
3、R2-R3之间为PPP封装,PAP认证,R2为主认证方;
4、R2-R4之间为PPP封装,CHAP认证,R2为主认证方;
5、R1、R4、R3构建MGRE环境,仅R1的IP地址固定;
6、内网使用RIP获取路由,所有PC可以互相访问,并且可访问R2的环回;
R1配置
[Huawei]sysname R1
[R1]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 192.168.1.1 24
[R1-GigabitEthernet0/0/1]int s4/0/0
[R1-Serial4/0/0]ip add 14.1.1.1 24
[R1-Serial4/0/0]
[R1]ip route-static 0.0.0.0 0 14.1.1.2
[R1]acl 2000
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1-acl-basic-2000]int s4/0/0
[R1-Serial4/0/0]nat outbound 2000
[R1-Serial4/0/0]link-protocol hdlc
[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 192.168.4.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 14.1.1.1
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R1-Tunnel0/0/0]nhrp network-id 100
[R1]rip
[R1-rip-1]vers 2
[R1-rip-1]network 192.168.4.0
[R1-rip-1]network 192.168.1.0
[R1-rip-1]q
[R1]int tunnel 0/0/0
[R1-Tunnel0/0/0]undo rip split-horizon
R2配置
[Huawei]sysname R2
[R2]int l0
[R2-LoopBack0]ip add 6.6.6.6 24
[R2-LoopBack0]int s4/0/0
[R2-Serial4/0/0]ip add 14.1.1.2 24
[R2-Serial4/0/0]int s4/0/1
[R2-Serial4/0/1]ip add 24.1.1.1 24
[R2-Serial4/0/1]int s3/0/0
[R2-Serial3/0/0]ip add 34.1.1.1 24
[R2-Serial3/0/0]
[R2]int s4/0/0
[R2-Serial4/0/0]link-protocol hdlc
[R2]aaa
[R2-aaa]local-user v2 password cipher 123456
[R2-aaa]local-user v2 service-type ppp
[R2-aaa]int s4/0/1
[R2-Serial4/0/1]ppp authentication-mode pap
[R2-Serial4/0/1]
[R2]aaa
[R2-aaa]local-user v3 password cipher 123456
[R2-aaa]local-user v3 service-type ppp
[R2-aaa]int s3/0/0
[R2-Serial3/0/0]ppp authentication-mode chap
[R3]ip route-static 0.0.0.0 0 24.1.1.1
[R3]acl 2000
[R3-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[R3-acl-basic-2000]int s4/0/0
[R3-Serial4/0/0]nat outbound 2000
[R3]int s4/0/0
[R3-Serial4/0/0]ppp pap local-user v2 password cipher 123456
[R3]intTunnel 0/0/0
[R3-Tunnel0/0/0]ip add 192.168.4.2 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source Serial 4/0/0
[R3-Tunnel0/0/0]nhrp entry 192.168.4.1 14.1.1.1 register
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]
[R3]rip
[R3-rip-1]vers 2
[R3-rip-1]network 192.168.4.0
[R3-rip-1]network 192.168.2.0
[R3-rip-1]
R4配置:
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R4
[R4]int s4/0/0
[R4-Serial4/0/0]ip add 34.1.1.2 24
[R4-Serial4/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.3.1 24
[R4-GigabitEthernet0/0/1]
[R4]ip route-static 0.0.0.0 0 34.1.1.1
[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R4-acl-basic-2000]int s4/0/0
[R4-Serial4/0/0]nat outbound 2000
[R4-Serial4/0/0]ppp chap password cipher 123456
[R4]int Tunnel 0/0/0
[R4-Tunnel0/0/0]ip add 192.168.4.3 24
[R4-Tunnel0/0/0]tunnel-protocol gre p2mp
[R4-Tunnel0/0/0]source s4/0/0
[R4-Tunnel0/0/0]nhrp entry 192.168.4.1 14.1.1.1 register
[R4-Tunnel0/0/0]nhrp network-id 100
[R4-Tunnel0/0/0]
[R4]rip
[R4-rip-1]vers 2
[R4-rip-1]network 192.168.4.0
[R4-rip-1]network 192.168.3.0
[R4-rip-1]
测试