网络工程——专业实习训练（拓扑搭建1）

最新推荐文章于 2024-07-17 21:40:42 发布

喜欢你，还有大家

最新推荐文章于 2024-07-17 21:40:42 发布

阅读量123

点赞数

分类专栏： ensp网络实训报告文章标签：学习网络协议测试工具

本文链接：https://blog.csdn.net/m0_68754495/article/details/127448900

版权

ensp网络实训报告专栏收录该内容

6 篇文章 2 订阅

订阅专栏

单臂路由和静态路由的配置

配置命令

SW1

interface Ethernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 10 20
#
interface Ethernet0/0/2
 port link-type access
 port default vlan 10
#
interface Ethernet0/0/3
 port link-type access
 port default vlan 20

interface GigabitEthernet0/0/0
 ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet0/0/0.10
 dot1q termination vid 10
 arp broadcast enable
#
interface GigabitEthernet0/0/0.20
 dot1q termination vid 20
 arp broadcast enable
#
interface GigabitEthernet0/0/1.10
 dot1q termination vid 10
 ip address 192.168.10.254 255.255.255.0
 arp broadcast enable
#
interface GigabitEthernet0/0/1.20
 dot1q termination vid 20
 ip address 192.168.20.254 255.255.255.0
 arp broadcast enable
#
ip route-static 192.168.30.0 255.255.255.0 10.1.1.2
ip route-static 192.168.40.0 255.255.255.0 10.1.1.2

SW2

interface Vlanif30
 ip address 192.168.30.254 255.255.255.0
#
interface Vlanif40
 ip address 192.168.40.254 255.255.255.0
#
interface Vlanif50
 ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet0/0/1
 port link-type access
 port default vlan 50
#
interface GigabitEthernet0/0/2
 port link-type access
 port default vlan 30
#
interface GigabitEthernet0/0/3
 port link-type access
 port default vlan 40
#
ip route-static 0.0.0.0 0.0.0.0 10.1.1.1