MGRE环境下的OSPF实验

首先规划分配IP和环回

 

1、将路由器隧道做好 

R1

interface Tunnel0/0/0
 ip address 192.168.6.1 255.255.255.0 
 tunnel-protocol gre p2mp
 source 16.0.2.1
 ospf network-type broadcast
 nhrp entry multicast dynamic
 nhrp network-id 100

interface Tunnel0/0/1
 ip address 192.168.7.1 255.255.255.0 
 tunnel-protocol gre p2mp
 source 16.0.1.1
 ospf network-type broadcast
 nhrp entry multicast dynamic
 nhrp network-id 100
 nhrp entry 192.168.7.2 46.0.0.1 register
 nhrp entry 192.168.7.3 56.0.0.1 register

R2

interface Tunnel0/0/0
 ip address 192.168.6.2 255.255.255.0 
 tunnel-protocol gre p2mp
 source GigabitEthernet0/0/0
 ospf network-type broadcast
 ospf dr-priority 0
 nhrp network-id 100
 nhrp entry 192.168.6.1 16.0.2.1 register

R3

interface Tunnel0/0/0
 ip address 192.168.6.3 255.255.255.0 
 tunnel-protocol gre p2mp
 source GigabitEthernet0/0/0
 ospf network-type broadcast
 ospf dr-priority 0
 nhrp network-id 100
 nhrp entry 192.168.6.1 16.0.2.1 register

R4

interface Tunnel0/0/1
 ip address 192.168.7.2 255.255.255.0 
 tunnel-protocol gre p2mp
 source 46.0.0.1
 ospf network-type broadcast
 nhrp entry multicast dynamic
 nhrp network-id 100
 nhrp entry 192.168.7.3 56.0.0.1 register

R5 

interface Tunnel0/0/1
 ip address 192.168.7.3 255.255.255.0 
 tunnel-protocol gre p2mp
 source 56.0.0.1
 ospf network-type broadcast
 nhrp entry multicast dynamic
 nhrp network-id 100
 nhrp entry 192.168.6.2 46.0.0.1 register
 nhrp entry 192.168.6.1 16.0.1.1 register

 2、配置OSPF协议

R1

ospf 1 router-id 1.1.1.1 
 area 0.0.0.0 
  network 192.168.1.0 0.0.0.255 
  network 192.168.6.0 0.0.0.255 
  network 192.168.7.0 0.0.0.255

R2

ospf 1 router-id 2.2.2.2 
 area 0.0.0.0 
  network 192.168.2.0 0.0.0.255 
  network 192.168.6.0 0.0.0.255

R3

ospf 1 router-id 3.3.3.3 
 area 0.0.0.0 
  network 192.168.3.0 0.0.0.255 
  network 192.168.6.0 0.0.0.255

R4

ospf 1 router-id 4.4.4.4 
 area 0.0.0.0 
  network 192.168.4.0 0.0.0.255 
  network 192.168.7.0 0.0.0.255

R5

ospf 1 router-id 5.5.5.5 
 area 0.0.0.0 
  network 192.168.5.0 0.0.0.255 
  network 192.168.7.0 0.0.0.255 

3、配置缺省路由

R1

ip route-static 0.0.0.0 0.0.0.0 16.1.1.2
ip route-static 0.0.0.0 0.0.0.0 16.2.2.2

R2

ip route-static 0.0.0.0 0.0.0.0 26.0.0.2

R3

ip route-static 0.0.0.0 0.0.0.0 36.0.0.2

R4

ip route-static 0.0.0.0 0.0.0.0 46.0.0.2

R5

ip route-static 0.0.0.0 0.0.0.0 56.0.0.2