DHCP中继配置(H3C)

一、实验拓扑

二、实验要求

• 要求PC通过DHCP中继的方式从服务器自动获取到IP地址和其他配置参数

三、实验步骤

[server]int g0/0
[server-GigabitEthernet0/0]ip add 10.0.0.1 30
[server-GigabitEthernet0/0]dhcp enable
[server]dhcp ser ip vlan10
[server-dhcp-pool-vlan10]net 192.168.1.0 24
[server-dhcp-pool-vlan10]gateway 192.168.1.254
[server-dhcp-pool-vlan10]dns 8.8.8.8
[server-dhcp-pool-vlan10]expired day 2  #配置地址池参数
[server]dhcp ser ip vlan20
[server-dhcp-pool-vlan20]net 192.168.2.0 24
[server-dhcp-pool-vlan20]gateway 192.168.2.254
[server-dhcp-pool-vlan20]ex d 2
[server-dhcp-pool-vlan20]dns 8.8.8.8
[server]dhcp server forbidden-ip 192.168.1.254  #不允许被分配的地址
[server]dhcp server forbidden-ip 192.168.2.254
[server]ip route-static 192.168.1.0 24 10.0.0.2
[server]ip route-static 192.168.2.0 24 10.0.0.2  #将中继与服务器间打通

[relay]vlan 10 20
[relay]int g1/0/2
[relay-GigabitEthernet1/0/2]p l t
[relay-GigabitEthernet1/0/2]p t per v 10 20   #放行相关vlan
[relay]int g1/0/1
[relay-GigabitEthernet1/0/1]p l r
[relay-GigabitEthernet1/0/1]ip add 10.0.0.2 30  #与服务器相连的接口配置IP地址
[relay]int vlan 10
[relay-Vlan-interface10]ip add 192.168.1.254 24
[relay-Vlan-interface10]dhcp select relay  
[relay-Vlan-interface10]dhcp relay server 10.0.0.1
[relay-Vlan-interface10]int vlan 20
[relay-Vlan-interface20]ip add 192.168.2.254 24
[relay-Vlan-interface20]dhcp select relay  #将需要被分配地址的接口配置为中继模式
[relay-Vlan-interface20]dhcp relay ser 10.0.0.1  #配置服务器地址
[relay]ip route-static 0.0.0.0 0 10.0.0.1  #打通与服务器间通信
[relay]dhcp enable  #必须使能DHCP，否则无效

[jr]int g1/0/2
[jr-GigabitEthernet1/0/2]p a v 10
[jr-GigabitEthernet1/0/2]int g1/0/3
[jr-GigabitEthernet1/0/3]p a v 20  #规划所属vlan
[jr-GigabitEthernet1/0/3]int g1/0/1
[jr-GigabitEthernet1/0/1]p l t
[jr-GigabitEthernet1/0/1]p t per v 10 20  #放行

四、实验结果