双点双向重发布

 实验要求：
1.使用双点双向重发布
2.所有路由进行最佳选路
3.存在备份路径，不得出现环路和路由回馈    

实验拓扑：

 配置如下：

[R1]int LoopBack 0
[R1-LoopBack0]ip add 172.16.1.1 24
[R1-LoopBack0]q
[R1]int LoopBack 1
[R1-LoopBack1]ip add 172.16.2.1 24
[R1-LoopBack1]q
[R1]int LoopBack 2
[R1-LoopBack2]ip add 172.16.3.1 24
[R1-LoopBack2]q
[R1]int LoopBack 3
[R1-LoopBack3]ip add 172.16.4.1 24
[R1-LoopBack3]q
[R1]int gi 0/0/0
[R1-GigabitEthernet0/0/0]ip add 12.1.1.1 24
[R1-GigabitEthernet0/0/0]int gi 0/0/1
[R1-GigabitEthernet0/0/1]ip add 14.1.1.1 24
[R1-GigabitEthernet0/0/1]q
[R1]rip 1
[R1-rip-1]version 2
[R1-rip-1]network 172.16.0.0
[R1-rip-1]network 12.0.0.0
[R1-rip-1]network 14.0.0.0
[R1-rip-1]q

 

[R2]int gi 0/0/0
[R2-GigabitEthernet0/0/0]ip add 12.1.1.2 24
[R2-GigabitEthernet0/0/0]q
[R2]int gi 0/0/1
[R2-GigabitEthernet0/0/1]ip add 23.1.1.2 24
[R2-GigabitEthernet0/0/1]q
[R2]int LoopBack 0
[R2-LoopBack0]ip add 192.168.2.1 24
[R2-LoopBack0]q
[R2]rip 1
[R2-rip-1]version 2
[R2-rip-1]network 12.0.0.0
[R2-rip-1]network 192.168.0.0
[R2-rip-1]q
[R2]ospf 1
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 23.1.1.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]q
[R2]ospf 1
[R2-ospf-1]import-route rip 1
[R2-ospf-1]q
[R2]rip 1
[R2-rip-1]import-route ospf 1
[R2-rip-1]q
抓取流量
[R2]ip ip-prefix 1 permit 172.16.1.0 24
[R2]ip ip-prefix 2 permit 172.16.2.0 24
[R2]ip ip-prefix 3 permit 172.16.3.0 24
[R2]ip ip-prefix 4 permit 172.16.4.0 24
 
[R2]route-policy huawei deny node 10
[R2-route-policy]if-match ip-prefix 1
[R2-route-policy]q
[R2]route-policy huawei permit node 20
[R2-route-policy]if-match ip-prefix 2      
[R2-route-policy]apply cost-type type-1
[R2-route-policy]q
[R2]route-policy huawei permit node 30
[R2-route-policy]if-match ip-prefix 3
[R2-route-policy]apply cost 6       
[R2-route-policy]q
[R2]route-policy huawei permit node 40
[R2-route-policy]if-match ip-prefix 4
[R2-route-policy]apply cost-type type-1
[R2-route-policy]apply cost 9
[R2-route-policy]q
[R2-ospf-1]import-route rip 1 route-policy huawei

 

 

 

 [R3]int LoopBack 0
[R3-LoopBack0]ip add 192.168.3.1 24
[R3-LoopBack0]q
[R3]int gi 0/0/0
[R3-GigabitEthernet0/0/0]ip add 23.1.1.3 24
[R3-GigabitEthernet0/0/0]q
[R3]int gi 0/0/1
[R3-GigabitEthernet0/0/1]ip add 34.1.1.3 24
[R3-GigabitEthernet0/0/1]q
[R3]ospf 1
[R3-ospf-1-area-0.0.0.0]network 23.1.1.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 34.1.1.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 192.168.3.0 0.0.0.255
 
[R3]int LoopBack 0
[R3-LoopBack0]ospf network-type broadcast 
 

 

[R4]int LoopBack 0
[R4-LoopBack0]ip add 192.168.4.1 24
[R4-LoopBack0]q
[R4]int g 0/0/0 
[R4-GigabitEthernet0/0/0]ip add 14.1.1.4 24
[R4-GigabitEthernet0/0/0]q
[R4]int gi 0/0/1
[R4-GigabitEthernet0/0/1]ip add 34.1.1.4 24
[R4-GigabitEthernet0/0/1]q
[R4]rip 1
[R4-rip-1]version 2
[R4-rip-1]network 14.0.0.0
[R4-rip-1]q
[R4]ospf 1
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]network 34.1.1.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]network 192.168.4.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]q
[R4-ospf-1]q
重发布
[R4]ospf 1
[R4-ospf-1]import-route rip 1
[R4-ospf-1]q
[R4]rip 1
[R4-rip-1]import-route ospf 1
[R4]ip ip-prefix haha permit 172.16.1.0 24
[R4]route-policy xixi deny node 10
[R4-route-policy]q
[R4-ospf-1]import-route rip 1 route-policy xixi  

 实验结果：（部分）