OSPF实验

最新推荐文章于 2024-08-07 22:12:43 发布

m0_74812084

最新推荐文章于 2024-08-07 22:12:43 发布

阅读量265

点赞数 6

文章标签：网络

本文链接：https://blog.csdn.net/m0_74812084/article/details/137408130

版权

1、整个网络IP地址为192.168.1.0/24，自己规划

192.168.1.0/29
192.168.1.8/30
192.168.1.12/30
192.168.1.64/26
192.168.1.128/26
192.168.1.192/26

2、area 0区域手工设置R1为DR、R2为BDR
area

<r1>sy
Enter system view, return user view with Ctrl+Z.
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ospf dr-priority ?
  INTEGER<0-255>  Router priority value
[r1-GigabitEthernet0/0/0]ospf dr-priority

3、R1、R2、R5上配置环回接口，但是R5环回接口不能宣告进OSPF

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r2
[r2]int l 0
[r2-LoopBack0]ip ad 192.168.1.129 26
[r2-LoopBack0]int g0/0/0
[r2-GigabitEthernet0/0/0]ip ad 192.168.1.2 29
Apr  5 2024 19:47:37-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 	
[r2-GigabitEthernet0/0/0]q	
[r2]ospf 1 router-id  2.2.2.2
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]network 192.168.1.129 0.0.0.0
[r2-ospf-1-area-0.0.0.0]network 192.168.1.2 0.0.0.0
[r2-ospf-1-area-0.0.0.0]
Apr  5 2024 19:49:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.168.192, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r1
[r1]interface  LoopBack 0
[r1-LoopBack0]ip ad 192.168.1.65 26
[r1-LoopBack0]int g0/0/0
[r1-GigabitEthernet0/0/0]ip ad 192.168.1.1 29
Apr  5 2024 19:43:31-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r1-GigabitEthernet0/0/0]q	
[r1]ospf 1 router-id 3.3.3.3
[r1-ospf-1]area 0	
[r1-ospf-1-area-0.0.0.0]network 192.168.1.65 0.0.0.0
[r1-ospf-1-area-0.0.0.0]network 192.168.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]
Apr  5 2024 19:48:54-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.168.192, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r5
[r5]int l 0
[r5-LoopBack0]ip ad 192.168.1.193 26
[r5-LoopBack0]int g0/0/0
[r5-GigabitEthernet0/0/0]ip ad 192.168.1.14 30
Apr  5 2024 20:05:50-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r5-GigabitEthernet0/0/0]ospf 1 r	
[r5-GigabitEthernet0/0/0]q
[r5]ospf 1 r	
[r5]ospf 1 router-id 3.3.3.3
[r5-ospf-1]area 1
[r5-ospf-1-area-0.0.0.1]ne	
[r5-ospf-1-area-0.0.0.1]network 192.168.1.14 0.0.0.0
[r5-ospf-1-area-0.0.0.1]q
[r5-ospf-1]q
[r5]ip route-static  0.0.0.0 0.0.0.0 NULL 0

4、全网可达

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r3
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip ad 192.168.1.3 29
Apr  5 2024 19:54:54-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip ad 192.168.1.9 30
Apr  5 2024 19:55:16-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r3-GigabitEthernet0/0/1]q
[r3]ospf 1 r	
[r3]ospf 1 router-id 2.2.2.2
[r3-ospf-1]area 1
[r3-ospf-1-area-0.0.0.1]network 192.168.1.9 0.0.0.0
[r3-ospf-1-area-0.0.0.1]area 0
[r3-ospf-1-area-0.0.0.0]network 192.168.1.3 0.0.0.0
[r3-ospf-1-area-0.0.0.0]
Apr  5 2024 20:00:12-08:00 r3 %%01OSPF/4/CONFLICT_ROUTERID_INTF(l)[3]:OSPF Route
r id conflict is detected on interface. (ProcessId=256, RouterId=2.2.2.2, AreaId
=0.0.0.0, InterfaceName=GigabitEthernet0/0/0,  IpAddr=3.1.168.192, PacketSrcIp=2

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r4
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ip ad 192.168.1.10 30
Apr  5 2024 20:01:51-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r4-GigabitEthernet0/0/0]int g0/0/1
[r4-GigabitEthernet0/0/1]ip ad 192.168.1.13 30
Apr  5 2024 20:02:04-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r4-GigabitEthernet0/0/1]q
[r4]ospf 1 r	
[r4]ospf 1 router-id 1.1.1.1
[r4-ospf-1]area 1
[r4-ospf-1-area-0.0.0.1]net	
[r4-ospf-1-area-0.0.0.1]network 192.168.1.13 0.0.0.0
[r4-ospf-1-area-0.0.0.1]network 192.168.1.10 0.0.0.0
[r4-ospf-1-area-0.0.0.1]
Apr  5 2024 20:03:47-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=9.1.168.192, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)