学HCIA的第一天

一个不会取名字的人

已于 2023-03-28 19:12:15 修改

阅读量137

点赞数

分类专栏： HCIA 文章标签：网络

于 2022-10-29 20:38:58 首次发布

本文链接：https://blog.csdn.net/m0_74812268/article/details/127591551

版权

HCIA 专栏收录该内容

11 篇文章 0 订阅

订阅专栏

<Huawei>system-view
[Huawei]sysname r1
[r1]user-interface console 0
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]quit
[r1]user-interface console 0
[r1-ui-console0]authentication-mode password
Please configure the login password (maximum length 16):jincheng
<r1>system-view
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
Oct 29 2022 20:02:27-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]display ip interface brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 2
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 2

Interface IP Address/Mask Physical Protocol
GigabitEthernet0/0/0 192.168.1.1/24 up up
GigabitEthernet0/0/1 unassigned down down
GigabitEthernet0/0/2 unassigned down down
NULL0 unassigned up up(s)
[r1-GigabitEthernet0/0/0]
Oct 29 2022 20:06:21-08:00 r1 %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEthern
et0/0/0 has turned into DOWN state.
[r1-GigabitEthernet0/0/0]
Oct 29 2022 20:06:21-08:00 r1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the DOWN state.
[r1-GigabitEthernet0/0/0]
Oct 29 2022 20:07:04-08:00 r1 %%01IFPDT/4/IF_STATE(l)[3]:Interface GigabitEthern
et0/0/0 has turned into UP state.
[r1-GigabitEthernet0/0/0]
Oct 29 2022 20:07:04-08:00 r1 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]
Oct 29 2022 20:14:40-08:00 r1 %%01IFPDT/4/IF_STATE(l)[5]:Interface GigabitEthern
et0/0/1 has turned into UP state.
[r1-GigabitEthernet0/0/0]quit
[r1]ping 192.168.1.2 24
^
Error:Too many parameters found at '^' position.
[r1]ping 192.168.1.2
PING 192.168.1.2: 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
Request time out

--- 192.168.1.2 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss

[r1]
Oct 29 2022 20:23:11-08:00 r1 %%01IFPDT/4/IF_STATE(l)[6]:Interface GigabitEthern
et0/0/0 has turned into DOWN state.
[r1]
Oct 29 2022 20:23:11-08:00 r1 %%01IFNET/4/LINK_STATE(l)[7]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the DOWN state.

<Huawei>system-view
[Huawei]sysname r2
[r2]user-interface console 0
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]quit
[r2]aaa
[r2-aaa]jincheng privilege level 15 password cipher xueyuan
[r2-aaa]local-user jincheng privilege level 15 password cipher xueyuan
Info: Add a new user.
[r2-aaa]
[r2-aaa]local-user jincheng service-type terminal
[r2-aaa]local-user xuesheng privilege level 0 password cipher 123
Info: Add a new user.
[r2-aaa]quit
[r2]user-interface console 0
[r2-ui-console0]authentication-mode aaa
[r2-ui-console0]return
<r2>quit

Configuration console exit, please press any key to log on

Username:jincheng
Password:
<r2>quit

Configuration console exit, please press any key to log on

Username:xuesheng
Password:
<r2>quit

Configuration console exit, please press any key to log on

Username:jincheng
Password:
-----------------------------------------------------------------------------

User last login information:
-----------------------------------------------------------------------------
Access Type: Serial
IP-Address : --
Time : 2022-10-29 20:19:03-08:00
-----------------------------------------------------------------------------
<r2>sys
<r2>system-view
Enter system view, return user view with Ctrl+Z.
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip address 192.168.1.2 24
Oct 29 2022 20:20:18-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]quit
[r2]display ip interface brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 2
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 2

Interface IP Address/Mask Physical Protocol
GigabitEthernet0/0/0 192.168.1.2/24 up up
GigabitEthernet0/0/1 unassigned down down
GigabitEthernet0/0/2 unassigned down down
NULL0 unassigned up up(s)
[r2]