【无标题】

已于 2022-11-29 14:21:33 修改
阅读量656 收藏 1
点赞数
分类专栏： 作业 代码作业 文章标签： 服务器 网络 运维
于 2022-11-25 17:17:25 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/m0_74817158/article/details/128035027
版权

 1.

<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.	
[Huawei]sysname r1	
[r1]user-interface console 0	
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]quit
[r1]interface g0/0/0	
[r1-GigabitEthernet0/0/0]ip address 172.16.0.1 13
Nov 26 2022 10:11:11-08:00 r1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r1-GigabitEthernet0/0/0]in g 0/0/1
[r1-GigabitEthernet0/0/1]ip address 172.16.32.2 19
Info: A similar IP subnet already exists. Please verify the current IP subnet de
sign.
[r1-GigabitEthernet0/0/1]
Nov 26 2022 10:19:05-08:00 r1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r1-GigabitEthernet0/0/1]quit	
[r1]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 10       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
     172.16.0.0/19  Direct  0    0           D   172.16.0.1      GigabitEthernet
0/0/0
     172.16.0.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
    172.16.32.0/19  Direct  0    0           D   172.16.32.2     GigabitEthernet
0/0/1
    172.16.32.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
  172.16.63.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
 172.23.255.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r1]
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2	
[r2]user-interface console 0
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]quit
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip address 172.16.64.2 19
Nov 26 2022 10:18:20-08:00 r2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]in g 0/0/1
[r2-GigabitEthernet0/0/1]ip address 172.16.96.1 19
Nov 26 2022 10:18:42-08:00 r2 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]quit
[r2]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 10       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
    172.16.64.0/19  Direct  0    0           D   172.16.64.2     GigabitEthernet
0/0/0
    172.16.64.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
  172.16.95.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
    172.16.96.0/19  Direct  0    0           D   172.16.96.1     GigabitEthernet
0/0/1
    172.16.96.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
 172.16.127.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r2]
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.	
[Huawei]sysname r3
[r3]user-interface console 0
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]quit
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ip address 172.16.160.2 19
Nov 26 2022 10:24:41-08:00 r3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]in g 0/0/1
[r3-GigabitEthernet0/0/1]ip address 172.16.192.1 19
Nov 26 2022 10:25:01-08:00 r3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r3-GigabitEthernet0/0/1]quit
[r3]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 10       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
   172.16.160.0/19  Direct  0    0           D   172.16.160.2    GigabitEthernet
0/0/0
   172.16.160.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
 172.16.191.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
   172.16.192.0/19  Direct  0    0           D   172.16.192.1    GigabitEthernet
0/0/1
   172.16.192.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
 172.16.223.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r3]
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r4
[r4]user-interface console 0	
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]quit
[r4]interface g0/0/0
[r4-GigabitEthernet0/0/0]ip address 172.16.192.2 19
Nov 26 2022 10:26:26-08:00 r4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r4-GigabitEthernet0/0/0]in g 0/0/1
[r4-GigabitEthernet0/0/1]ip address 172.16.224.2 19
[r4-GigabitEthernet0/0/1]
Nov 26 2022 10:26:45-08:00 r4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r4-GigabitEthernet0/0/1]quit	
[r4]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 10       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
   172.16.192.0/19  Direct  0    0           D   172.16.192.2    GigabitEthernet
0/0/0
   172.16.192.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
 172.16.223.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
   172.16.224.0/19  Direct  0    0           D   172.16.224.2    GigabitEthernet
0/0/1
   172.16.224.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
 172.16.255.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r4]
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.	
[Huawei]sysname r6	
[r6]user-interface console 0
[r6-ui-console0]idle-timeout 0 0
[r6-ui-console0]quit
[r6]interface g0/0/1	
[r6-GigabitEthernet0/0/1]ip address 172.16.0.2 19
Nov 26 2022 10:28:26-08:00 r6 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r6-GigabitEthernet0/0/1]in g 0/0/0	
[r6-GigabitEthernet0/0/0]ip address 10.1.1.1 24
Nov 26 2022 10:28:46-08:00 r6 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r6-GigabitEthernet0/0/0]quit	
[r6]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 10       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       10.1.1.0/24  Direct  0    0           D   10.1.1.1        GigabitEthernet
0/0/0
       10.1.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
     10.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
     172.16.0.0/19  Direct  0    0           D   172.16.0.2      GigabitEthernet
0/0/1
     172.16.0.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
  172.16.31.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r6]
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r7
[r7]user-interface console 0
[r7-ui-console0]idle-timeout 0 0
[r7-ui-console0]quit
[r7]interface g0/0/1	
[r7-GigabitEthernet0/0/1]ip address 10.1.1.2 24
Nov 26 2022 10:29:57-08:00 r7 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r7-GigabitEthernet0/0/1]in g 0/0/0	
[r7-GigabitEthernet0/0/0]ip address 11.1.1.1 24
Nov 26 2022 10:30:11-08:00 r7 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r7-GigabitEthernet0/0/0]quit	
[r7]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 10       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       10.1.1.0/24  Direct  0    0           D   10.1.1.2        GigabitEthernet
0/0/1
       10.1.1.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
     10.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
       11.1.1.0/24  Direct  0    0           D   11.1.1.1        GigabitEthernet
0/0/0
       11.1.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
     11.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r7]
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.	
[Huawei]sysname r8
[r8]user-interface console 0	
[r8-ui-console0]idle-timeout 0 0
[r8-ui-console0]quit
[r8]interface g0/0/0	
[r8-GigabitEthernet0/0/0]ip address 172.16.96.2 19
Nov 26 2022 10:31:28-08:00 r8 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r8-GigabitEthernet0/0/0]in g 0/0/1
[r8-GigabitEthernet0/0/1]ip address 172.16.128.2 19
Nov 26 2022 10:31:59-08:00 r8 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r8-GigabitEthernet0/0/1]quit	
[r8]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 10       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
    172.16.96.0/19  Direct  0    0           D   172.16.96.2     GigabitEthernet
0/0/0
    172.16.96.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
 172.16.127.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
   172.16.128.0/19  Direct  0    0           D   172.16.128.2    GigabitEthernet
0/0/1
   172.16.128.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
 172.16.159.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r8]

2.

[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]network 172.16.32.2 0.0.0.0	
[r1-ospf-1-area-0.0.0.0]network 172.16.32.0 0.0.0.255
[r1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]quit	
[r1-ospf-1]area 1	
[r1-ospf-1-area-0.0.0.1]network 172.16.0.1 0.0.0.0
[r1-ospf-1-area-0.0.0.1]network 172.16.0.0 0.0.0.255
[r1-ospf-1-area-0.0.0.1]network 1.1.1.1 0.0.0.0
Error: The specified network command has been occupied by another area or proces
s.
[r1-ospf-1-area-0.0.0.1]quit
[r1-ospf-1]quit
[r1]
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]area 0	
[r2-ospf-1-area-0.0.0.0]network 172.16.64.2 0.0.0.0	
[r2-ospf-1-area-0.0.0.0]network 172.16.64.0 0.0.0.255
[r2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
[r2-ospf-1-area-0.0.0.0]quit	
[r2-ospf-1]area 2	
[r2-ospf-1-area-0.0.0.2]network 172.16.96.1 0.0.0.0
[r2-ospf-1-area-0.0.0.2]network 172.16.96.0 0.0.0.255
[r2-ospf-1-area-0.0.0.2]network 2.2.2.2 0.0.0.0
Error: The specified network command has been occupied by another area or proces
s.
[r2-ospf-1-area-0.0.0.2]quit
[r2-ospf-1]quit
[r2]
[r3]ospf 1 router-id 3.3.3.3	
[r3-ospf-1]area 0	
[r3-ospf-1-area-0.0.0.0]network 172.16.160.2 0.0.0.0
[r3-ospf-1-area-0.0.0.0]network 172.16.160.0 0.0.0.255
[r3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0
[r3-ospf-1-area-0.0.0.0]quit	
[r3-ospf-1]area 3
[r3-ospf-1-area-0.0.0.3]network 172.16.192.1 0.0.0.0	
[r3-ospf-1-area-0.0.0.3]network 172.16.192.0 0.0.0.255	
[r3-ospf-1-area-0.0.0.3]network 3.3.3.3 0.0.0.0
Error: The specified network command has been occupied by another area or proces
s.
[r3-ospf-1-area-0.0.0.3]quit
[r3-ospf-1]quit
[r3]
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]area 3	
[r4-ospf-1-area-0.0.0.3]network 172.16.192.2 0.0.0.0
[r4-ospf-1-area-0.0.0.3]network 172.16.192.0 0.0.0.255
[r4-ospf-1-area-0.0.0.3]network 4.4.4.4 0.0.0.0
[r4-ospf-1-area-0.0.0.3]quit
[r4-ospf-1]quit
[r4]
[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]area 1	
[r6-ospf-1-area-0.0.0.1]network 172.16.0.2 0.0.0.0
[r6-ospf-1-area-0.0.0.1]network 172.16.0.0 0.0.0.255
[r6-ospf-1-area-0.0.0.1]network 6.6.6.6 0.0.0.0
[r6-ospf-1-area-0.0.0.1]quit
[r6-ospf-1]quit
[r6]
[r8]ospf 1 router-id 8.8.8.8	
[r8-ospf-1]area 2	
[r8-ospf-1-area-0.0.0.2]network 172.16.96.2 0.0.0.0
[r8-ospf-1-area-0.0.0.2]network 172.16.96.0 0.0.0.255	
[r8-ospf-1-area-0.0.0.2]network 8.8.8.8 0.0.0.0
[r8-ospf-1-area-0.0.0.2]quit
[r8-ospf-1]quit
[r8]

3.

[r1]interface g0/0/0	
[r1-GigabitEthernet0/0/0]ospf timer hello 5
[r1-GigabitEthernet0/0/0]in g 0/0/1	
[r1-GigabitEthernet0/0/1]ospf timer hello 5
[r1-GigabitEthernet0/0/1]quit
[r1]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[r1]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
) 
[r1]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[r1]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding) 
[r1]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
 
[r1]
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ospf timer hello 5
[r2-GigabitEthernet0/0/0]in g 0/0/1	
[r2-GigabitEthernet0/0/1]ospf timer hello 5
[r2-GigabitEthernet0/0/1]quit
[r2]
Nov 26 2022 10:48:48-08:00 r2 %%01OSPF/3/NBR_CHG_DOWN(l)[9]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=8.8.8.8, NeighborEven
t=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r2]
Nov 26 2022 10:48:48-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[10]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=8.8.8.8, Neighbo
rAreaId=33554432, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate r
eason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Paramet
er Mismatch, NeighborChangeTime=2022-11-26 10:48:48-08:00) 
[r2]
Nov 26 2022 10:51:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r2]
Nov 26 2022 10:51:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
 
[r2]
Nov 26 2022 10:51:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change) 
[r2]
Nov 26 2022 10:51:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing) 
[r2]
Nov 26 2022 10:51:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.96.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 

[r2]
[r3]interface g0/0/0	
[r3-GigabitEthernet0/0/0]ospf timer hello 5
[r3-GigabitEthernet0/0/0]in g 0/0/1
[r3-GigabitEthernet0/0/1]ospf timer hello 5
[r3-GigabitEthernet0/0/1]quit
[r3]
Nov 26 2022 10:49:45-08:00 r3 %%01OSPF/3/NBR_CHG_DOWN(l)[9]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=4.4.4.4, NeighborEven
t=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down) 
[r3]
Nov 26 2022 10:49:45-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[10]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=4.4.4.4, Neighbo
rAreaId=50331648, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate r
eason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Paramet
er Mismatch, NeighborChangeTime=2022-11-26 10:49:45-08:00) 
[r3]
Nov 26 2022 10:50:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[r3]
Nov 26 2022 10:50:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
) 
[r3]
Nov 26 2022 10:50:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[r3]
Nov 26 2022 10:50:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding) 
[r3]
Nov 26 2022 10:50:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.192.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
 
[r3]
[r4]interface g0/0/0	
[r4-GigabitEthernet0/0/0]ospf timer hello 5
[r4-GigabitEthernet0/0/0]quit
[r4]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[r4]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
) 
[r4]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[r4]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding) 
[r4]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
 
[r4]
[r6]interface g0/0/1	
[r6-GigabitEthernet0/0/1]ospf timer hello 5
[r6-GigabitEthernet0/0/1]quit
[r6]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 

[r6]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
) 
[r6]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange) 
[r6]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding) 
[r6]
Nov 26 2022 10:50:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.192.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
 
[r6]
[r8]interface g0/0/0
[r8-GigabitEthernet0/0/0]os	
[r8-GigabitEthernet0/0/0]ospf ti	
[r8-GigabitEthernet0/0/0]ospf timer h	
[r8-GigabitEthernet0/0/0]ospf timer hello 5
[r8-GigabitEthernet0/0/0]quit
[r8]
Nov 26 2022 10:51:31-08:00 r8 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r8]
Nov 26 2022 10:51:33-08:00 r8 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
 
[r8]
Nov 26 2022 10:51:33-08:00 r8 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change) 
[r8]
Nov 26 2022 10:51:33-08:00 r8 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing) 
[r8]
Nov 26 2022 10:51:33-08:00 r8 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.96.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 

[r8]

4.

[r6]interface g0/0/1	
[r6-GigabitEthernet0/0/1]ospf dr-priority 0
[r6-GigabitEthernet0/0/1]quit
[r6]

5.

[r8]dhcp enable 
Info: The operation may take a few seconds. Please wait for a moment.done.
[r8]ip pool 1
Info: It's successful to create an IP address pool.	
[r8-ip-pool-1]network 192.168.1.0 mask 24
[r8-ip-pool-1]gateway-list 192.168.1.1
[r8-ip-pool-1]dns-list 8.8.8.8	
[r8-ip-pool-1]static-bind ip-address 192.168.1.2 mac-address 5489-9828-4049
[r8-ip-pool-1]quit
[r8]ip pool 2
Info: It's successful to create an IP address pool.
[r8-ip-pool-2]network 192.168.2.0 mask 24
[r8-ip-pool-2]gateway-list 192.168.2.1	
[r8-ip-pool-2]dns-list 8.8.8.8
[r8-ip-pool-2]static-bind ip-address 192.168.2.2 mac-address 5489-988A-7642
[r8-ip-pool-2]quit
[r8]interface g0/0/1	
[r8-GigabitEthernet0/0/1]dhcp select global 
[r8-GigabitEthernet0/0/1]quit
[r8]
[r4]dhcp enable 
Info: The operation may take a few seconds. Please wait for a moment.done.
[r4]ip pool 1
Info: It's successful to create an IP address pool.	
[r4-ip-pool-1]network 192.168.3.0 mask 24	
[r4-ip-pool-1]gateway-list 192.168.3.1 	
[r4-ip-pool-1]dns-list 8.8.8.8
[r4-ip-pool-1]static-bind ip-address 192.168.3.2 mac-address 5489-98AD-6E63
[r4-ip-pool-1]quit
[r4]ip pool 2
Info: It's successful to create an IP address pool.	
[r4-ip-pool-2]network 192.168.4.0 mask 24	
[r4-ip-pool-2]gateway-list 192.168.4.1	
[r4-ip-pool-2]dns-list 8.8.8.8
[r4-ip-pool-2]static-bind ip-address 192.168.4.2 mac-address 5489-9843-44DE
[r4-ip-pool-2]quit	
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]dhcp select global 
[r4-GigabitEthernet0/0/1]quit
[r4]

6.

[r7]aaa
[r7-aaa]local-user r7 privilege level 0 password cipher 123
Info: Add a new user.
[r7-aaa]quit
[r7]

7.


[r6]acl 3000
[r6-acl-adv-3000]rule 2 deny icmp source 172.16.32.2 0.0.0.0 de	
[r6-acl-adv-3000]rule 2 deny icmp source 172.16.32.2 0.0.0.0 destination 172.16.192.2 0.0.0.0
[r6-acl-adv-3000]quit
[r6]interface g0/0/1
[r6-GigabitEthernet0/0/1]traffic-filter inbound acl 3000
[r6-GigabitEthernet0/0/1]quit	
[r6]user-interface vty 0 4	
[r6-ui-vty0-4]authentication-mode password 
Please configure the login password (maximum length 16):123
[r6-ui-vty0-4]quit
[r6]acl 3000
[r6-acl-adv-3000]rule deny tcp source 172.16.32.2 0.0.0.0 destination 172.16.192.2 0.0.0.0 destination-port eq 23
[r6-acl-adv-3000]quit
[r6]interface g0/0/1	
[r6-GigabitEthernet0/0/1]traffic-filter inbound acl 3000
Error: A simplified ACL has been applied in this view.
[r6-GigabitEthernet0/0/1]quit
[r6]

8.

[r8]acl 3000	
[r8-acl-adv-3000]rule 2 deny icmp source 172.16.128.2 0.0.0.0 destination 182.16.224.2 0.0.0.0
[r8-acl-adv-3000]quit
[r8]interface g0/0/1	
[r8-GigabitEthernet0/0/1]traffic-filter inbound acl 3000
[r8-GigabitEthernet0/0/1]quit
[r8]user-interface vty 0 4	
[r8-ui-vty0-4]authentication-mode password 
Please configure the login password (maximum length 16):123
[r8-ui-vty0-4]quit
[r8]
[r4]acl 3000	
[r4-acl-adv-3000]rule 2 deny icmp source 172.16.224.2 0.0.0.0 destination 172.16.128.2 0.0.0.0
[r4-acl-adv-3000]quit
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]traffic-filter inbound acl 3000
[r4-GigabitEthernet0/0/1]quit
[r4]user-interface vty 0 4	
[r4-ui-vty0-4]authentication-mode password 
Please configure the login password (maximum length 16):123
[r4-ui-vty0-4]quit	
[r4]acl 3000	
[r4-acl-adv-3000]rule deny icmp source 172.16.224.2 0.0.0.0 destination 172.16.128.2 0.0.0.0 icmp-type echo
[r4-acl-adv-3000]quit
[r4]

m0_74817158
关注
  • 0
    点赞
  • 踩
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
VC去掉'无标题'字样的方法.zip
11-21
Visual c++去掉'无标题'字样的方法.zip
Qt-无标题窗口
学而思
05-21 7192
        今天学习了下无标题窗口，于是来记录下我的学习过程首先建立一个Qt Widgets Application继承QWidget类创建完后直接运行就得到了如下效果那么，既然是无标题窗口就要去掉窗口栏啊，于是加上setWindowFlags(Qt::FramelessWindowHint | Qt::WindowMinimizeButtonHint);去掉标题栏，但是这样整个窗口就不能移动...
C# 移动无标题栏无边框窗体的3种方法
SabreWulf
03-13 2213
目录 第一种：手工移动 第二种：调用系统API 1.引入下面代码 前提需要引入命名空间using System.Runtime.InteropServices 2.增加鼠标按下事件发送消息，让系统误以为按下是标题栏 第三种，重写 WndProc 第一种：手工移动 直接通过修改窗体位置从而达到移动窗体的效果 //定义一个位置信息Point用于存储鼠标位置 private Point mPoint; /// <summary>
Qt实现改变无标题栏窗体大小及移动窗体
danshiming的博客
11-10 2832
Qt实现鼠标左键拖动无标题栏窗体右下角改变窗体大小及移动窗体
Chrome 无标题 哭脸 已崩溃
wkj52719的博客
05-24 4101
谷歌浏览器chrome突然打开后任何页面均显示为无标题，哭脸。鼠标选中sheet页面时，提示已崩溃。 无法打开设置、开发工具箱 经过检查，是chrome的Userdata数据出错，导致页面加载无法正常展示页面。 修复办法： 打开文件夹C:\Users\{privateUserId}\AppData\Local\Google\Chrome，删除User data文件夹，如果需要备份UserData,请备份User Data到其他地方。 ...
Qt无标题窗口
05-21
一个比较简单的Qt无标题窗口，基本实现了现在默认窗口自带的功能，可以用于界面美化自绘标题栏。
无标题
02-12
无标题
visual c++取掉对话框窗口的 -无标题 字样的方法
08-04
vc++取掉窗口的 -无标题 字样
【问题实操】银河高级服务器操作系统实例分享，某信息系统服务器宕机处理
银河麒麟操作系统的博客
05-17 1002
【问题实操】银河高级服务器操作系统实例分享，某信息系统服务器宕机处理。
Linux repo包安装Nginx
weixin_43485737的博客
05-14 353
一般Nginx默认是安装在/etc/nginx 目录。
服务器CPU满载100%怎么处理
m0_70754056的博客
05-17 203
CC是通过IP频繁的发起访问，可以通过命令或在查看日志查看到一些IP，就可以在IIS中设置屏蔽该IP对Web站点的访问，从而缓解CC攻击的压力。随着网络信息化的发展，服务器给企业服务商们带来非常多的便利，但与此同时在服务器的管理和维护上也令众多服务商们头疼不已，尤其当服务器在长时间的运行状态上，卡顿是最常见的问题，CPU满载是卡顿最常见的原因之一，那么遇到服务器CPU满载100%怎么办？2、程序占用导致的CPU满载，可以升级更高的硬件配置来解决，或者也是可以另购一台机器，将业务分摊到两台机器上，进行使用。
【MySQL精通之路】MySQL 8.0中添加、弃用或删除的服务器和状态变量及选项
Anakki的博客
05-16 316
欢迎大家关注专栏或者关注收藏我1.Mysql精通之路专栏: http://t.csdnimg.cn/4Rqp72.大家可以从这篇博客开始读，他是所有博客的根节点：【MySQL精通之路】详读MySQL8.0官方文档-CSDN博客MySQL 8.0中添加了以下系统变量、状态变量和服务器选项。 MySQL 8.0中删除了以下系统变量、状态变量和选项。
服务器通的远程桌面连接不上，关于服务器通畅但远程桌面连接不上问题的专业分析
day3ZY的博客
05-14 321
服务器通畅但远程桌面连接不上是一个常见的问题，可能涉及多个方面的因素。通过仔细检查防火墙和安全组设置、远程桌面服务配置、凭证配置以及网络配置，我们可以逐步定位并解决问题。检查服务器的网络配置，包括IP地址、子网掩码、网关等，确保没有冲突或错误。然而，有时会出现服务器网络通畅，但远程桌面无法连接的情况。这可能导致客户端无法成功建立连接。虽然服务器网络通畅，但可能存在网络配置错误，如IP地址冲突、子网掩码设置错误等，导致远程桌面连接失败。服务器的远程桌面服务可能未正确启用或配置，导致客户端无法连接到远程桌面。
Vue如何打包上传至服务器？及其步骤。打包后刷新页面404怎么解决？
qingdouxiaohua的博客
05-17 126
打开你的Vue项目所在的文件夹，使用VSCode或其他你喜欢的编辑器打开。 在VSCode的终端中，输入npm run build（假设你的package.json文件中已经配置好了这个命令）。这个命令会启动Vue的打包过程，将你的项目打包成一个可以在服务器上运行的静态文件。 打包完成后，你会在项目根目录下看到一个名为dist的文件夹，这个文件夹中就是打包后的静态文件。
Outlook的IMAP服务器怎么填写？填写步骤？
danplus的博客
05-14 624
正确填写Outlook的IMAP服务器信息是确保你能够成功使用Outlook来发送和接收邮件的关键。AokSend，API/SMTP接口联通Outlook IMAP，邮件管理更高效。轻松收发，助您商务沟通畅通无阻，事业更上一层楼！
vue3+vite项目部署服务器，选择非根目录访问
蓝枫秋千的踩坑记录
05-14 212
但是根目录已经部署了另外一个项目A了，这个时候要在部署另外一个项目B。之前直接输入http://test.com即可访问A项目。配置，其中root对应的路径为项目nginx资源的路径。比如你的地址是http://test.com。访问A：http://test.com/A。访问B：http://test.com/B。vue3+vite项目，需要部署服务器。这样，你本地和服务器的访问也会自动带上。这样的话，本地访问不带，服务器会带。如果B项目也这么干的话就冲突了。vite项目的话，修改。
Linux 内核开发 27 POSIX共享内存
最新发布
jxusthusiwen的专栏
05-18 894
支持 POSIX 共享内存，linux 内核使用的是通过一个名为tmpfs的特殊文件系统来实现内存共享，并且将文件系统挂载在rootfs的/dev/shm上。这种实现与linux 文件系统api 相互一致，所以每个文件都有inode 与名称与之对应。使用posix 应用开发者来说，更具灵活性（相比systemv 内存共享模式）。映射实现由tmpfs文件系统处理。shm_open()是 POSIX 共享内存的 API 函数之一，用于创建或打开 POSIX 共享内存对象。
Gooxi发布最新AI服务器：加速生成式AI落地 更懂AI
gooxi_hui的博客
05-14 822
当AI算力的需求演变成为通用算力需求，AI模型以及应用场景持续走向多元化和复杂化，为了满足模型训练对算力需求的升级进化，帮助用户快速搭建起高效AI应用环境，Gooxi在此需求上推出全新AI训推一体机Gooxi Intel Eagle Stream平台4U8卡服务器，具备领先架构、超强算力、灵活扩展等特点，为不同的AI应用提供强劲算力支持。■ 高效互联，生态成熟：整机支持多达32个DDR5内存插槽，速率最高支持5600MT/s，支持RDIMM或LRDIMM，支持CXL1.1，支持HBM等技术。
设置无标题 android
05-02
在Android应用中，设置无标题是一种简洁和美观的设计方式，可以为用户提供更流畅的使用体验。以下是一些实现设置无标题的方法： 1. 在Android的Manifest文件中，找到对应Activity的标签，并添加”android:theme="@android:style/Theme.NoTitleBar"“属性。这样可以通过Android自带的主题去掉标题栏。 2. 使用自定义的主题，可以在样式表中添加以下代码： <style name="AppTheme" parent="Theme.AppCompat.NoActionBar"> <!-- ...其他样式... --> </style> 这种方式可以通过设置主题去除ActionBar和标题栏，同时保留其他布局元素。 3. 去掉代码中的setTitle()方法，这是一种最简单的方法，通过不设置Activity的标题来实现无标题。 以上就是三种常见的实现Android无标题的方式，开发者可以根据实际需求进行选择。值得注意的是，去除标题栏可能会影响用户的导航体验，因此在设计上需要考虑周全。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值