【无标题】

已于 2022-11-26 14:12:24 修改
阅读量133 收藏
点赞数
分类专栏： 作业 代码作业 文章标签： 网络 服务器 运维
于 2022-11-26 14:12:17 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/m0_74817158/article/details/128050476
版权 
[r2]interface g0/0/1.20
[r2-GigabitEthernet0/0/1.20]arp broadcast enable
[r2-GigabitEthernet0/0/1.20]quit
[r2]interface g0/0/1.30
[r2-GigabitEthernet0/0/1.30]arp broadcast enable
[r2-GigabitEthernet0/0/1.30]quit
[r2]interface LoopBack 0	
[r2-LoopBack0]ip address 2.2.2.2 32
[r2-LoopBack0]quit
[r2]rip 1
[r2-rip-1]version 2	
[r2-rip-1]network 2.0.0.0	
[r2-rip-1]network 192.168.1.0
[r2-rip-1]quit
[r2]

 1.

<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r1	
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 27
Nov 26 2022 12:29:53-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r1-GigabitEthernet0/0/0]in g 0/0/1
[r1-GigabitEthernet0/0/1]ip address 192.168.1.33 27
Nov 26 2022 12:35:22-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r1-GigabitEthernet0/0/1]quit	
[r1]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 10       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
    192.168.1.0/27  Direct  0    0           D   192.168.1.1     GigabitEthernet
0/0/0
    192.168.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
   192.168.1.31/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
   192.168.1.32/27  Direct  0    0           D   192.168.1.33    GigabitEthernet
0/0/1
   192.168.1.33/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
   192.168.1.63/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r1]
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip address 192.168.1.2 27
Nov 26 2022 12:32:46-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]in g 0/0/1	
[r2-GigabitEthernet0/0/1]ip address 192.168.1.65 27
Nov 26 2022 12:37:46-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r2-GigabitEthernet0/0/1]quit
[r2]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 10       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
    192.168.1.0/27  Direct  0    0           D   192.168.1.2     GigabitEthernet
0/0/0
    192.168.1.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
   192.168.1.31/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
   192.168.1.64/27  Direct  0    0           D   192.168.1.65    GigabitEthernet
0/0/1
   192.168.1.65/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
   192.168.1.95/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[r2]
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]vlan batch 2 3
Info: This operation may take a few seconds. Please wait for a moment...done. v	
[Huawei]display voice-vlan
[Huawei]interface e0/0/2
[Huawei-Ethernet0/0/2]port link-type access 
[Huawei-Ethernet0/0/2]port default vlan 2
[Huawei-Ethernet0/0/2]quit
[Huawei]interface e0/0/3
[Huawei-Ethernet0/0/3]port link-type access 
[Huawei-Ethernet0/0/3]port default vlan 3
[Huawei-Ethernet0/0/3]quit
[Huawei]display vlan
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up;         D: Down;         TG: Tagged;         UT: Untagged;
MP: Vlan-mapping;               ST: Vlan-stacking;
#: ProtocolTransparent-vlan;    *: Management-vlan;
--------------------------------------------------------------------------------

VID  Type    Ports                                                          
--------------------------------------------------------------------------------
1    common  UT:Eth0/0/1(U)     Eth0/0/4(D)     Eth0/0/5(D)     Eth0/0/6(D)     
                Eth0/0/7(D)     Eth0/0/8(D)     Eth0/0/9(D)     Eth0/0/10(D)    
                Eth0/0/11(D)    Eth0/0/12(D)    Eth0/0/13(D)    Eth0/0/14(D)    
                Eth0/0/15(D)    Eth0/0/16(D)    Eth0/0/17(D)    Eth0/0/18(D)    
                Eth0/0/19(D)    Eth0/0/20(D)    Eth0/0/21(D)    Eth0/0/22(D)    
                GE0/0/1(D)      GE0/0/2(D)                                      

2    common  UT:Eth0/0/2(U)                                                     

             TG:Eth0/0/1(U)                                                     

3    common  UT:Eth0/0/3(U)                                                     

             TG:Eth0/0/1(U)                                                     


VID  Status  Property      MAC-LRN Statistics Description      
--------------------------------------------------------------------------------

1    enable  default       enable  disable    VLAN 0001                         
2    enable  default       enable  disable    VLAN 0002                         
3    enable  default       enable  disable    VLAN 0003                         

[Huawei]interface e0/0/1
[Huawei-Ethernet0/0/1]port link-type trunk	
[Huawei-Ethernet0/0/1]port trunk allow-pass vlan all 
[Huawei-Ethernet0/0/1]quit
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]vlan batch 20 30
[Huawei]interface e0/0/2	
[Huawei-Ethernet0/0/2]port link-type access 	
[Huawei-Ethernet0/0/2]port default vlan 20
[Huawei-Ethernet0/0/2]quit
[Huawei]interface e0/0/3	
[Huawei-Ethernet0/0/3]port link-type access 	
[Huawei-Ethernet0/0/3]port default vlan 30
[Huawei-Ethernet0/0/3]quit
[Huawei]interface e0/0/2
[Huawei-Ethernet0/0/2]po	
[Huawei-Ethernet0/0/2]port l	
[Huawei-Ethernet0/0/2]port link-t	
[Huawei-Ethernet0/0/2]port link-type ac	
[Huawei-Ethernet0/0/2]port link-type access 
[Huawei-Ethernet0/0/2]po	
[Huawei-Ethernet0/0/2]port de	
[Huawei-Ethernet0/0/2]port default v	
[Huawei-Ethernet0/0/2]port default vlan 20
[Huawei-Ethernet0/0/2]quit	
[Huawei]display vlan
The total number of vlans is : 3
--------------------------------------------------------------------------------
U: Up;         D: Down;         TG: Tagged;         UT: Untagged;
MP: Vlan-mapping;               ST: Vlan-stacking;
#: ProtocolTransparent-vlan;    *: Management-vlan;
--------------------------------------------------------------------------------

VID  Type    Ports                                                          
--------------------------------------------------------------------------------
1    common  UT:Eth0/0/1(U)     Eth0/0/4(D)     Eth0/0/5(D)     Eth0/0/6(D)     
                Eth0/0/7(D)     Eth0/0/8(D)     Eth0/0/9(D)     Eth0/0/10(D)    
                Eth0/0/11(D)    Eth0/0/12(D)    Eth0/0/13(D)    Eth0/0/14(D)    
                Eth0/0/15(D)    Eth0/0/16(D)    Eth0/0/17(D)    Eth0/0/18(D)    
                Eth0/0/19(D)    Eth0/0/20(D)    Eth0/0/21(D)    Eth0/0/22(D)    
                GE0/0/1(D)      GE0/0/2(D)                                      

20   common  UT:Eth0/0/2(U)                                                     

30   common  UT:Eth0/0/3(U)                                                     


VID  Status  Property      MAC-LRN Statistics Description      
--------------------------------------------------------------------------------

1    enable  default       enable  disable    VLAN 0001                         
20   enable  default       enable  disable    VLAN 0020                         
30   enable  default       enable  disable    VLAN 0030                         

[Huawei]interface e0/0/1
[Huawei-Ethernet0/0/1]port link-type trunk 	
[Huawei-Ethernet0/0/1]port trunk allow-pass vlan all
[Huawei]
[r1]interface g0/0/1.2
[r1-GigabitEthernet0/0/1.2]dot1q termination vid 2	
[r1-GigabitEthernet0/0/1.2]ip address 192.168.1.97 27
Nov 26 2022 13:05:23-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/1.2 has entered the UP state. 
[r1-GigabitEthernet0/0/1.2]arp broadcast enable 
[r1-GigabitEthernet0/0/1.2]quit
[r1]interface g0/0/1.3	
[r1-GigabitEthernet0/0/1.3]dot1q termination vid 3	
[r1-GigabitEthernet0/0/1.3]ip address 192.168.1.129 27
Nov 26 2022 13:09:00-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1.3 has entered the UP state. 	
[r1-GigabitEthernet0/0/1.3]arp broadcast enable 
[r1-GigabitEthernet0/0/1.3]quit
[r1]
[r2]interface g0/0/1.20
[r2-GigabitEthernet0/0/1.20]dot1q termination vid 20	
[r2-GigabitEthernet0/0/1.20]ip address 192.168.1.161 27
Nov 26 2022 13:12:15-08:00 r2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/1.20 has entered the UP state. 
[r2-GigabitEthernet0/0/1.20]quit
[r2]interface g0/0/1.30
[r2-GigabitEthernet0/0/1.30]dot1q termination vid 30	
[r2-GigabitEthernet0/0/1.30]ip address 192.168.1.193 27
Nov 26 2022 13:12:54-08:00 r2 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/1.30 has entered the UP state. 
[r2-GigabitEthernet0/0/1.30]quit
[r2]
	
[r1]interface g0/0/1.2
[r1-GigabitEthernet0/0/1.2]arp broadcast enable 
Info: This interface has already been configured with ARP broadcast.
[r1-GigabitEthernet0/0/1.2]quit	
[r1]interface g0/0/1.3
[r1-GigabitEthernet0/0/1.3]arp broadcast enable 
Info: This interface has already been configured with ARP broadcast.
[r1-GigabitEthernet0/0/1.3]quit
[r1]interface LoopBack 0
[r1-LoopBack0]ip address 1.1.1.1 32
[r1-LoopBack0]quit
[r1]rip 1	
[r1-rip-1]version 2
[r1-rip-1]network 1.0.0.0
[r1-rip-1]network 192.168.1.0
Error: The specified network already exists in the process.
[r1-rip-1]
[r2]interface LoopBack 0	
[r2-LoopBack0]ip address 2.2.2.2 32
[r2-LoopBack0]quit 
[r2]rip 1
[r2-rip-1]version 2
[r2-rip-1]network 192.168.1.0
[r2-rip-1]quit
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]rip summary-address 192.168.1.0 255.255.255.224
[r2-GigabitEthernet0/0/1]quit
[r2]
m0_74817158
关注
专栏目录
Qt无标题窗口
05-21
一个比较简单的Qt无标题窗口，基本实现了现在默认窗口自带的功能，可以用于界面美化自绘标题栏。
无标题
02-12
无标题
RIP的简单介绍！和模拟实验
weixin_48185643的博客
07-27 3327
RIP（路由信息协议）
ospf和rip双向路由实验
weixin_48185643的博客
07-27 1951
继续上次的实验我们加一个路由器是属于rip的 R4 undo ter undo terminal mo undo terminal monitor Info: Current terminal monitor is off. sys Enter system view, return user view with Ctrl+Z. [Huawei]sysname [Huawei]sysname R4 [R4]user-int [R4]user-interface co [R4]user-inte.
RIP 实验
cx612728的博客
03-22 206
RIP 实验
动态路由、RIP
m0_53432902的博客
01-07 529
** 动态路由、RIP ** 动态路由： 动态路由是指路由器能够自动地建立自己的路由表，并且能够根据实际情况的变化（根据具体的协议）适时地进行调整。 动态路由特点： 减少管理任务、占用了网络带宽 动态路由协议概述： 路由器之间用来交换信息的语言。 度量值： 跳数，带宽，负载，时延，可靠性，成本。（通过度量值确定最优路由路径） 收敛： 使所有路由表都达到一致状态的过程 静态路由与动态路由的比较 网络中静态路由和动态路由互相补充 水平分割、毒性逆转 水平分割：在路由信息传送过程中，路由器从某个接口接收到的跟新信
VC去掉'无标题'字样的方法.zip
11-21
Visual c++去掉'无标题'字样的方法.zip
visual c++取掉对话框窗口的 -无标题 字样的方法
08-04
vc++取掉窗口的 -无标题 字样
c#实现无标题栏窗口的拖动
09-05
本篇文章是对c#中实现无标题栏窗口拖动的方法进行了详细的分析介绍，需要的朋友参考下
无标题dwewerwerwerwrwqrqwrqwrwqre
最新发布
06-06
无标题dwewerwerwerwrwqrqwrqwrwqre
无标题jsjshshhshshshs
05-09
无标题jsjshshhshshshs
无标题123111113332
05-11
123
无标题zibraeffect
10-09
无标题zibraeffect
Delphi实现拖动按钮移动无标题栏窗口
05-11
摘要:Delphi源码,界面编程,窗体拖动,无标题栏 无标题栏的窗体的拖动功能实现，Delphi添加一个可拖动窗体的按钮，通过对此按钮的控制可移动窗体，实现按住标题栏移动窗口的功能，无标题栏也就不能显示最大化、最小化...
作业11.18
zhuqifan0412的博客
11-18 314
作业
与MS SqlServer服务器 建立连接后，查询数据时发生-指定的网络名不再可用错误-The specified network name is no longer available
ziren的专栏
04-29 2620
MS SqlServer 建立连接后，查询数据时发生Failed to retrieve data for this request ，报指定的网络名不再可用错误-The specified network name is no longer available的错误。
路由器相关程序图
ENVILPRIME的博客
01-13 221
R1 <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sysname R1 [R1]interface g0/0/0 [R1-GigabitEthernet0/0/0]ip address 12.1.1.2 24 Jan 13 2022 17:32:23-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on ...
ENSP的The specified address conflicts with another address.以及其中一个Protocol是down的问题
weixin_45528773的博客
05-04 5378
通过undo ip address进行修改，再用dis cur和dis ip int b配合查看。
设置无标题 android
05-02
在Android应用中，设置无标题是一种简洁和美观的设计方式，可以为用户提供更流畅的使用体验。以下是一些实现设置无标题的方法： 1. 在Android的Manifest文件中，找到对应Activity的标签，并添加”android:theme="@...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值