反向代理+web集群+mysql mha实验总结

一、实验步骤

1、部署框架前准备工作

服务器类型	部署组件	ip地址
DR1调度服务器 主（ha01）	Keepalived+LVS-DR	192.168.86.13
DR2调度服务器 备 (ha02)	Keepalived+LVS-DR	192.168.86.14
web1节点服务器 (slave01)	Nginx+Tomcat+MySQL 备+MHA manager+MHA node	192.168.86.10
web2节点服务器 (slave02)	Nginx+Tomcat +MySQL 备+MHA node	192.168.86.11
NFS存储服务器（master01）	MySQL 主+NFS+MHA node	192.168.86.12
vip	虚拟ip	192.168.86.100

实验要求 通过keepalived的虚拟ip(vip)访问静态或者动态网页，mysql中的master节点能够实现故障自动切换

2、准备环境（关闭防护墙、修改主机名）

[root@localhost ~]# systemctl stop firewalld
[root@localhost ~]# setenforce 0
[root@localhost ~]# hostnamectl set-hostname ha01
[root@localhost ~]# hostnamectl set-hostname ha02
[root@localhost ~]# hostnamectl set-hostname slave01
[root@localhost ~]# hostnamectl set-hostname slave02
[root@localhost ~]# hostnamectl set-hostname master01
[root@localhost ~]# su

3、部署LVS-DR

3.1 、配置负载调度器ha01与ha02同时配置(192.168.86.13、192.168.86.14)

[root@ha01 ~]# modprobe ip_vs
[root@ha01 ~]# cat /proc/net/ip_vs
## 加载ip_vs模块，并查看版本信息
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port Forward Weight ActiveConn InActConn
[root@ha01 ~]# yum install -y ipvsadm

3.2、配置虚拟ip地址（VIP:192.168.86.100）

[root@ha01 ~]# cd /etc/sysconfig/network-scripts/
[root@ha01 network-scripts]# ls
ifcfg-ens33  ifdown-ipv6    ifdown-TeamPort  ifup-ippp   ifup-routes       network-functions
ifcfg-lo     ifdown-isdn    ifdown-tunnel    ifup-ipv6   ifup-sit          network-functions-ipv6
ifdown       ifdown-post    ifup             ifup-isdn   ifup-Team
ifdown-bnep  ifdown-ppp     ifup-aliases     ifup-plip   ifup-TeamPort
ifdown-eth   ifdown-routes  ifup-bnep        ifup-plusb  ifup-tunnel
ifdown-ib    ifdown-sit     ifup-eth         ifup-post   ifup-wireless
ifdown-ippp  ifdown-Team    ifup-ib          ifup-ppp    init.ipv6-global
[root@ha01 network-scripts]# cp ifcfg-ens33 ifcfg-ens33:0
[root@ha01 network-scripts]# vim ifcfg-ens33:0
#配置文件内容
DEVICE=ens33:0
ONBOOT=yes
IPADDR=192.168.86.100
NETMASK=255.255.255.255

[root@ha01 network-scripts]# ifup ifcfg-ens33:0
[root@ha01 network-scripts]# ifconfig 
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.86.13  netmask 255.255.255.0  broadcast 20.0.0.255
        inet6 fe80::fa76:f2fe:47ea:cebf  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:1f:fb:2f  txqueuelen 1000  (Ethernet)
        RX packets 21454  bytes 29257870 (27.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 9843  bytes 614500 (600.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
​
ens33:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.86.100  netmask 255.255.255.255  broadcast 20.0.0.10
        ether 00:0c:29:1f:fb:2f  txqueuelen 1000  (Ethernet)
​
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 386  bytes 34810 (33.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 386  bytes 34810 (33.9 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
​
virbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.122.1  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:7b:ec:da  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
​

[root@ha01 network-scripts]# route add -host 192.168.86.100 dev ens33:0
[root@ha01 network-scripts]# vim /etc/rc.local
#配置文件添加内容
/usr/sbin/route add -host 192.168.86.100 dev ens33:0

3.3、配置ARP内核响应参数防止更新VIP中的MAC地址，避免发生冲突

[root@ha01 network-scripts]# vim /etc/sysctl.conf 
#配置文件内容
#proc响应关闭重定向功能
net.ipv4.ip_forward = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0

[root@ha01 network-scripts]# sysctl -p
## 加载配置文件生效
net.ipv4.ip_forward = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0
​

3.4、配置负载均衡分配策略

[root@ha01 network-scripts]# ipvsadm-save > /etc/sysconfig/ipvsadm
 ## 保持策略
[root@ha01 network-scripts]# systemctl start ipvsadm.service
## 开启ipvsadm服务
[root@ha01 network-scripts]# ipvsadm -C
## 情况策略，添加虚拟ip地址，指定负载均衡算法给两台web节点服务器
[root@ha01 network-scripts]# ipvsadm -A -t  192.168.86.100:80 -s rr
[root@ha01 network-scripts]# ipvsadm -a -t  192.168.86.100:80 -r 192.168.86.10:80 -g
[root@ha01 network-scripts]# ipvsadm -a -t  192.168.86.100:80 -r 192.168.86.11:80 -g
[root@ha01 network-scripts]# ipvsadm
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  ha01:http rr
  -> 192.168.86.10:http              Route   1      0          0         
  -> 192.168.86.11:http              Route   1      0          0         

3.5、配置web节点服务器（两台slave同时部署 192.168.86.10 、192.168.86.11）

3.5.1、配置虚拟ip地址（VIP：192.168.86.100）

[root@slave01 ~]# cd /etc/sysconfig/network-scripts/
[root@slave01 network-scripts]# ls
ifcfg-ens33  ifdown-ipv6    ifdown-TeamPort  ifup-ippp   ifup-routes       network-functions
ifcfg-lo     ifdown-isdn    ifdown-tunnel    ifup-ipv6   ifup-sit          network-functions-ipv6
ifdown       ifdown-post    ifup             ifup-isdn   ifup-Team
ifdown-bnep  ifdown-ppp     ifup-aliases     ifup-plip   ifup-TeamPort
ifdown-eth   ifdown-routes  ifup-bnep        ifup-plusb  ifup-tunnel
ifdown-ib    ifdown-sit     ifup-eth         ifup-post   ifup-wireless
ifdown-ippp  ifdown-Team    ifup-ib          ifup-ppp    init.ipv6-global
[root@slave01 network-scripts]# cp ifcfg-ens33 ifcfg-lo:0
[root@slave01 network-scripts]# vim ifcfg-lo:0

DEVICE=lo:0
ONBOOT=yes
IPADDR=192.168.86.100
NETMASK=255.255.255.255

[root@slave01 network-scripts]# ifup ifcfg-lo:0
## 开启虚拟网卡
[root@slave01 network-scripts]# ifconfig
## 查看网卡

[root@slave01 network-scripts]# route add -host 192.168.86.100 dev lo:0
[root@slave01 network-scripts]# vim /etc/rc.local 
## 配置永久添加路由
route add -host 192.168.86.100 dev lo:0

3.5.3、配置ARP内核响应参数防止更新VIP中的MAC地址，避免发生冲突

[root@slave01 network-scripts]# vim /etc/sysctl.conf 
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2

[root@slave01 network-scripts]# sysctl -p
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2

3.6、部署NFS存储服务器（NFS共享存储ip地址：192.168.86.12）

[root@master01 ~]# rpm -q rpcbind nfs-utils 
## 检查是否有安装nfs
rpcbind-0.2.0-42.el7.x86_64
nfs-utils-1.3.0-0.48.el7.x86_64
    
[root@master01 ~]# systemctl start nfs
[root@master01 ~]# systemctl start rpcbind
##开启服务
[root@master01 ~]# systemctl enable nfs
## 设置开机自启
Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service.
[root@master01 ~]# systemctl enable rpcbind
[root@master01 ~]# mkdir /opt/web1 /opt/web2
## 创建web目录
[root@master01 ~]# echo '<h1>This is node web1</h1>' >  /opt/web1/index.html
[root@master01 ~]# echo '<h1>This is node web2</h1>' >  /opt/web2/index.html
## 添加网页内容

[root@master01 ~]# vim /etc/exports
/opt/web1 192.168.86.0/24(ro,sync)
/opt/web2 192.168.86.0/24(ro,sync)

[root@master01 ~]# exportfs -rv
## 发布共享
exporting 192.168.86.0/24:/opt/web2
exporting 192.168.86.0/24:/opt/web1

3.7、节点服务器安装web服务（Nginx）并挂载共享目录

3.7.1、安装Nginx

将安装包拖入/opt/目录下

[root@slave01 network-scripts]# cd /opt/
[root@slave01 opt]# ls
nginx-1.12.2.tar.gz  rh
[root@slave01 opt]# systemctl disable firewalld.service 
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
[root@slave01 opt]# systemctl status  firewalld.service 

3.7.2、安装依赖包

[root@slave01 opt]# yum -y install pcre-devel zlib-devel gcc gcc-c++ make

3.7.3、创建运行用户、组

[root@slave01 opt]#  useradd -M -s /sbin/nologin nginx
[root@slave01 opt]# id nginx

[root@slave01 opt]# ls
nginx-1.12.0.tar.gz  rh
[root@slave01 opt]# tar zxvf nginx-1.12.0.tar.gz 

3.7.5、安装相关模块

[root@slave01 opt]# ls
nginx-1.12.0  nginx-1.12.0.tar.gz  rh
[root@slave01 opt]# cd nginx-1.12.0/
[root@slave01 nginx-1.12.0]# ls
auto  CHANGES  CHANGES.ru  conf  configure  contrib  html  LICENSE  man  README  src
[root@slave01 nginx-1.12.0]# 
./configure \
--prefix=/usr/local/nginx \
--user=nginx \
--group=nginx \
--with-http_stub_status_module

3.7.6、编译安装Nginx

[root@slave01 nginx-1.12.0]# make && make install

3.7.7、将Nginx链接到/user/local/sbin下

[root@slave01 nginx-1.12.0]# cd /usr/local/nginx/sbin/
[root@slave01 sbin]# ls
nginx
[root@slave01 sbin]# ln -s /usr/local/nginx/sbin/nginx /usr/local/sbin/

3.7.8、启动Nginx服务

[root@slave01 sbin]# nginx -t
## 检查配置文件是否正确
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[root@slave01 sbin]# netstat -natp | grep :80
[root@slave01 sbin]# systemctl restart nginx
## 开启nginx服务
[root@slave01 sbin]# netstat -natp | grep :80
## nginx 与httpd都是80端口不能同时开启服务，如有开启httpd服务需关闭
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      43551/nginx: master 

3.7.9、节点服务器挂载共享目录 （slave1 slave2分别挂载/opt/web1 /opt/web2）

[root@slave01 sbin]# cd 
[root@slave01 ~]# showmount -e 192.168.86.12
Export list for 192.168.86.12:
/opt/web2 192.168.86.0/24
/opt/web1 192.168.86.0/24
[root@slave01 ~]# mount.nfs 192.168.86.12:/opt/web1 /usr/local/nginx/html/
[root@slave01 ~]# cd /usr/local/nginx/html/
[root@slave01 html]# ls
index.html
[root@slave01 html]# cat index.html 
<h1>This is node web1</h1>

4、部署Nginx+Tomcat的动静分离

4.1、安装Tomcat作为后端服务器

将tomcat和jdk安装包放入/opt/目录下

[root@slave01 html]# cd /opt/
[root@slave01 opt]# ls
apache-tomcat-9.0.16.tar.gz  jdk-8u201-linux-x64.rpm  nginx-1.12.0  nginx-1.12.0.tar.gz  rh
[root@slave01 opt]# cd 
[root@slave01 ~]# vim tomcat.sh
#!/bin/bash
#安装部署tomcat
systemctl stop firewalld
systemctl disable firewalld
setenforce 0
#安装JDK
cd /opt
rpm -ivh jdk-8u201-linux-x64.rpm &> /dev/null
java -version          
#设置JDK环境变量
cat > /etc/profile.d/java.sh <<EOF
export JAVA_HOME=/usr/java/jdk1.8.0_201-amd64
export CLASSPATH=.:$JAVA_HOME/lib/tools.jar:$JAVA_HOME/lib/dt.jar                     
export PATH=$JAVA_HOME/bin:$PATH
EOF
source /etc/profile.d/java.sh
if [ $? -eq 0 ];then
echo -e  "\033[34;1m JDK安装完成！ \033[0m"
fi
java -version
#安装启动Tomcat
cd /opt
tar zxvf apache-tomcat-9.0.16.tar.gz &> /dev/null
mv apache-tomcat-9.0.16 /usr/local/tomcat
##启动tomcat 
/usr/local/tomcat/bin/startup.sh
if [ $? -eq 0 ];then
echo -e  "\033[34;1m tomcat安装完成！ \033[0m"
fi

[root@slave01 ~]# chmod +x tomcat.sh 
[root@slave01 ~]# ./tomcat.sh 

4.2 动静分离Tomcat server配置（192.168.86.10、192.168.86.11）

4.2 配置Tomcat的动态网页显示内容

slave01 192.168.86.10

[root@slave01 opt]# mkdir /usr/local/tomcat/webapps/test
## 创建目录
[root@slave01 opt]# cd /usr/local/tomcat/webapps/
[root@slave01 webapps]# ls
docs  examples  host-manager  manager  ROOT  test
[root@slave01 webapps]# cd test/
[root@slave01 test]# vim /usr/local/tomcat/webapps/test/index.jsp
<%@ page language="java" import="java.util.*" pageEncoding="UTF-8" %>
<html>
<head>
<title>tomcat1</title>
</head>
<body>
<% out.println("This is tomcat1 server");%>
<div>动态页面1</div><br/>
</body>
</html>
[root@slave01 test]# ls
index.jsp

slave02 192.168.86.11

[root@slave02 opt]# mkdir /usr/local/tomcat/webapps/test
## 创建目录
[root@slave02 opt]# cd /usr/local/tomcat/webapps/
[root@slave02 webapps]# ls
docs  examples  host-manager  manager  ROOT  test
[root@slave02 webapps]# cd test/
[root@slave02 test]# vim /usr/local/tomcat/webapps/test/index.jsp
<%@ page language="java" import="java.util.*" pageEncoding="UTF-8" %>
<html>
<head>
<title>tomcat2</title>
</head>
<body>
<% out.println("This is tomcat2 server");%>
<div>动态页面2</div><br/>
</body>
</html>
[root@slave02 test]# ls
index.jsp

4.2.2、Tomcat实例主配置删除前面的 Host配置，增添新的Host配置

两个web节点服务器配置相同

[root@slave01 test]# cd /usr/local/tomcat/conf/
[root@slave01 conf]# ls
catalina.policy      context.xml           jaspic-providers.xsd  server.xml        tomcat-users.xsd
catalina.properties  jaspic-providers.xml  logging.properties    tomcat-users.xml  web.xml
[root@slave01 conf]# cp server.xml{,.bak}
## 备份配置文件
[root@slave01 conf]# vim server.xml
    **删除148-164行配置文件**
    添加以下字段
     <Host name="localhost"  appBase="webapps"
            unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">
        <Context docBase="/usr/local/tomcat/webapps/test" path="" reloadable="true" />
        </Host>

[root@slave01 conf]# /usr/local/tomcat/bin/shutdown.sh 
[root@slave01 conf]# /usr/local/tomcat/bin/startup.sh 
[root@slave01 conf]# netstat -natp | grep 8080
## 查看端口是否打开
tcp6       0      0 :::8080                 :::*                    LISTEN      45514/java          

4.3 Nginx server 配置（192.168.86.10、192.168.86.11）两者配置相同

[root@slave01 conf]# cd /usr/local/nginx/conf/
[root@slave01 conf]# ls
fastcgi.conf            koi-utf             nginx.conf           uwsgi_params
fastcgi.conf.default    koi-win             nginx.conf.default   uwsgi_params.default
fastcgi_params          mime.types          scgi_params          win-utf
fastcgi_params.default  mime.types.default  scgi_params.default
[root@slave01 conf]# cp nginx.conf{,.bak}
[root@slave01 conf]# vim nginx.conf
##复制备份修改配置文件
    upstream tomcat_server {
       server 192.168.86.10:8080 weight=1;
       server 192.168.86.11:8080 weight=1;
    }
        server_name  www.web1.com;
        charset utf-8;
        location ~ .*.jsp$ {
            proxy_pass http://tomcat_server;
            proxy_set_header HOST $host;
            proxy_set_header X-Real-IP $remote_addr;
             proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        }
        location ~ .*\.(gif|jpg|jpeg|png|bmp|swf|css)$ {
            root /usr/local/nginx/html;
            expires 10d;
        }

[root@slave02 conf]# cd /usr/local/nginx/sbin/
[root@slave01 sbin]# nginx -s reload

4.4、测试Nginx和Tomcat 动静分离 结果

5、 配置keeplived（主（ha01）、备(ha02)DR 服务器都需要配置）

主 DR服务器 ha01：192.168.86.13

[root@ha01 ~]# yum install ipvsadm keepalived -y
[root@ha01 ~]# cd /etc/keepalived/
[root@ha01 keepalived]# ls
keepalived.conf
[root@ha01 keepalived]# cp keepalived.conf{,.bak}
[root@ha01 keepalived]# vim keepalived.conf
## 按图修改配置文件

按行数yy+p复制段落

[root@ha01 keepalived]# systemctl start keepalived.service 
[root@ha01 keepalived]# ip addr show dev ens33

[root@ha01 keepalived]# scp keepalived.conf  192.168.86.14:/etc/keepalived/
## 注意备ha02调度服务器要先下载 yum install ipvsadm keepalived -y ，在scp传输keepalived.conf文件

备 DR服务器 ha02：192.168.86.14

[root@ha01 ~]# yum install ipvsadm keepalived -y
[root@ha02 network-scripts]# cd /etc/keepalived/
[root@ha02 keepalived]# systemctl start keepalived.service 
[root@ha02 keepalived]# vim keepalived.conf 

[root@ha02 keepalived]# systemctl start keepalived.service 

5.1、 调整内核 proc 响应参数，关闭linux内核的重定向参数响应

主DR在LVS-DR模式中已经调整了响应参数，现在只需要修改备DR服务器即可

[root@ha02 keepalived]# vim /etc/sysctl.conf 
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0

[root@ha02 keepalived]# sysctl -p

测试keepalived是否能主备切换成功

关闭主DR服务器ha01中的keepaliverd服务： 主DR服务器ha01

[root@ha01 keepalived]# systemctl stop keepalived.service 
[root@ha01 keepalived]# ip a

虚拟ip已关闭

备DR服务器ha02

在浏览器中测试动静分离页面

6.1、安装MySQL(slave01,slave02,master同时配置)

6.1.1、编译及安装MySQL

将安装包放入opt目录下

[root@master01 opt]# ls
boost_1_59_0.tar.gz  mysql-5.7.17.tar.gz  rh  web1  web2
[root@master01 opt]# yum -y install gcc gcc-c++ ncurses ncurses-devel bison cmake
## 安装环境依赖包
[root@master01 opt]# tar zxvf mysql-5.7.17.tar.gz 
[root@master01 opt]# tar zxvf boost_1_59_0.tar.gz 
[root@master01 opt]# mv boost_1_59_0 /usr/local/boost
[root@master01 opt]# mkdir /usr/local/mysql
[root@master01 opt]# cd mysql-5.7.17/
[root@master01 mysql-5.7.17]# 
 ## 先输入cmake \ ，复制下面文字
  cmake \
 -DCMAKE_INSTALL_PREFIX=/usr/local/mysql \
 -DMYSQL_UNIX_ADDR=/usr/local/mysql/mysql.sock \
 -DSYSCONFDIR=/etc \
 -DSYSTEMD_PID_DIR=/usr/local/mysql \
 -DDEFAULT_CHARSET=utf8  \
 -DDEFAULT_COLLATION=utf8_general_ci \
 -DWITH_EXTRA_CHARSETS=all \
 -DWITH_INNOBASE_STORAGE_ENGINE=1 \
 -DWITH_ARCHIVE_STORAGE_ENGINE=1 \
 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
 -DWITH_PERFSCHEMA_STORAGE_ENGINE=1 \
 -DMYSQL_DATADIR=/usr/local/mysql/data \
 -DWITH_BOOST=/usr/local/boost \
-DWITH_SYSTEMD=1

[root@master01 mysql-5.7.17]# make && make install

6.2、创建MySQL用户

[root@master01 mysql-5.7.17]# cd /usr/local/
[root@master01 local]# useradd -M -s /sbin/nologin mysql
## 创建mysql用户，不建立宿主目录，以及不允许登录

6.3、修改MySQL配置文件

[root@master01 local]# vim /etc/my.cnf
##将原有配置文件数据全部清空，复制下面所有配置信息到my.cnf中 50+dd全部清空
[client]
port = 3306
default-character-set=utf8
socket=/usr/local/mysql/mysql.sock
[mysql]
port = 3306
default-character-set=utf8
socket = /usr/local/mysql/mysql.sock
auto-rehash
[mysqld]
user = mysql
basedir=/usr/local/mysql
datadir=/usr/local/mysql/data
port = 3306
character-set-server=utf8
pid-file = /usr/local/mysql/mysqld.pid
socket=/usr/local/mysql/mysql.sock
bind-address = 0.0.0.0
skip-name-resolve
max_connections=2048
default-storage-engine=INNODB
max_allowed_packet=16M
server-id = 1
 
sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_AUTO_VALUE_ON_ZERO,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,PIPES_AS_CONCAT,ANSI_QUOTES

6.4、更改MySQL安装目录和配置文件的属主属组

[root@master01 local]# chown -R mysql:mysql /usr/local/mysql/
[root@master01 local]# chown  mysql:mysql /etc/my.cnf

6.5、设置路径环境变量

[root@master01 local]# echo 'export PATH=/usr/local/mysql/bin:/usr/local/mysql/lib:$PATH' >> /etc/profile
[root@master01 local]# source /etc/profile
[root@master01 local]# echo $PATH
/usr/local/mysql/bin:/usr/local/mysql/lib:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:/root/bin

6.6、初始化数据库

[root@master01 local]# cd /usr/local/mysql/bin/
[root@master01 bin]# 
##复制下面代码写入
./mysqld \
 --initialize-insecure \
 --user=mysql-maseter01 \
 --basedir=/usr/local/mysql \
 --datadir=/usr/local/mysql/data

6.7、添加MySQLD系统服务

[root@slave01 bin]# cp /usr/local/mysql/usr/lib/systemd/system/mysqld.service /usr/lib/systemd/system/
[root@slave01 bin]# systemctl daemon-reload 
[root@slave01 bin]# systemctl start mysqld.service 
[root@slave01 bin]# systemctl enable mysqld.service 
## 重新加载并开启服务，设置开机自启动
Created symlink from /etc/systemd/system/multi-user.target.wants/mysqld.service to /usr/lib/systemd/system/mysqld.service.
[root@slave01 bin]# netstat -natp |grep 3306
tcp        0      0 0.0.0.0:3306            0.0.0.0:*               LISTEN      90475/mysqld        

6.8、修改MySQL 的登录密码

[root@slave01 bin]# mysqladmin -u root -p password "123456"
## 按回车
Enter password: 
mysqladmin: [Warning] Using a password on the command line interface can be insecure.
Warning: Since password will be sent to server in plain text, use ssl connection to ensure password safety.

6.9、授权远程登录

[root@slave01 bin]# mysql -u root -p123456
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 6
Server version: 5.7.17 Source distribution

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> CREATE DATABASE mydatabase;
Query OK, 1 row affected (0.01 sec)

mysql> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| mydatabase         |
| mysql              |
| performance_schema |
| sys                |
+--------------------+
5 rows in set (0.01 sec)

mysql> grant all privileges on *.* to 'root'@'%' identified by '123';
## 允许root用户登录，并给权限
Query OK, 0 rows affected, 1 warning (0.00 sec)

mysql> quit
Bye

6.10、MySQL集群配置一主双从

在所有服务器上/etc/hosts配置文件中，添加IP与主机名的解析并进行ping测试

[root@slave01 ~]# vim /etc/hosts
192.168.86.10 slave01
192.168.86.11 slave02
192.168.86.12 maseter01

测试是否能ping通

修改 Master01、Slave01、Slave02 节点的 Mysql主配置文件/etc/my.cnf

Master01主数据库

[root@master01 bin]# vim /etc/my.cnf
## 添加
log_bin = master-bin
log-slave-updates = true

[root@master01 bin]# systemctl restart mysqld.service 
## 重启数据库

slave01备数据库

[root@slave01 ~]# vim /etc/my.cnf
## 修改添加
server-id = 2
log_bin = master-bin
relay-log = relay-log-bin
relay-log-index = slave-relay-bin.index

[root@slave01 ~]# systemctl restart mysqld.service 
##重启

slave02备主数据库

[root@slave02 bin]# vim /etc/my.cnf
##同上修改添加
server-id = 3
log_bin = master-bin
relay-log = relay-log-bin
relay-log-index = slave-relay-bin.index

[root@slave02 bin]# systemctl restart mysqld.service
##重启

在 Master01、Slave01、Slave02 节点上都创建两个软链接

Master01主数据库

[root@master01 bin]# ln -s /usr/local/mysql/bin/{mysql,mysqlbinlog} /usr/sbin/
[root@master01 bin]# ll /usr/sbin/mysql*
lrwxrwxrwx. 1 root root 26 1月   4 09:13 /usr/sbin/mysql -> /usr/local/mysql/bin/mysql
lrwxrwxrwx. 1 root root 32 1月   4 09:13 /usr/sbin/mysqlbinlog -> /usr/local/mysql/bin/mysqlbinlog

slave01备数据库

[root@slave01 ~]# ln -s /usr/local/mysql/bin/{mysql,mysqlbinlog} /usr/sbin/
[root@slave01 ~]# ll /usr/sbin/mysql*
lrwxrwxrwx. 1 root root 26 1月   4 09:14 /usr/sbin/mysql -> /usr/local/mysql/bin/mysql
lrwxrwxrwx. 1 root root 32 1月   4 09:14 /usr/sbin/mysqlbinlog -> /usr/local/mysql/bin/mysqlbinlog

slave02备数据库

[root@slave02 bin]# ln -s /usr/local/mysql/bin/{mysql,mysqlbinlog} /usr/sbin/
[root@slave02 bin]# ll /usr/sbin/mysql*
lrwxrwxrwx. 1 root root 26 1月   4 09:14 /usr/sbin/mysql -> /usr/local/mysql/bin/mysql
lrwxrwxrwx. 1 root root 32 1月   4 09:14 /usr/sbin/mysqlbinlog -> /usr/local/mysql/bin/mysqlbinlog

所有数据库节点进行 mysql 授权（一主两从），三台都设置一样

[root@master01 bin]# mysql -uroot -p123456
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.7.17-log Source distribution

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> grant replication slave on *.* to 'myslave'@'192.168.86.%' identified by '123456';
## 从数据库同步使用
Query OK, 0 rows affected, 1 warning (0.00 sec)

mysql> grant all privileges on *.* to 'mha'@'192.168.86.%' identified by 'manager';
Query OK, 0 rows affected, 1 warning (0.00 sec)

mysql> grant all privileges on *.* to 'mha'@'maseter01' identified by 'manager';
## 防止从库通过主机名连接不上主库
Query OK, 0 rows affected, 2 warnings (0.00 sec)

mysql> grant all privileges on *.* to 'mha'@'slave01' identified by 'manager';
Query OK, 0 rows affected, 2 warnings (0.00 sec)

mysql> grant all privileges on *.* to 'mha'@'slave02' identified by 'manager';
Query OK, 0 rows affected, 2 warnings (0.00 sec)

mysql> flush privileges;
## 刷新权限
Query OK, 0 rows affected (0.00 sec)

** Master01 主数据库查看二进制文件和同步点 **

mysql> show master status;
+-------------------+----------+--------------+------------------+-------------------+
| File              | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+-------------------+----------+--------------+------------------+-------------------+
| master-bin.000001 |     1750 |              |                  |                   |
+-------------------+----------+--------------+------------------+-------------------+
1 row in set (0.00 sec)

mysql> 

Slave01、Slave02 服务器执行同步操作，并查看数据同步结果，注意：上方的master状态的数量要与下方的master_log_pos 的写入的数要一致，才能同步

mysql> change master to master_host='192.168.86.12',master_user='myslave',master_password='123456',master_log_file='master-bin.000001',master_log_pos=1750;
Query OK, 0 rows affected, 2 warnings (0.01 sec)

mysql> start slave;
Query OK, 0 rows affected (0.01 sec)

mysql> show slave status\G;
*************************** 1. row ***************************
               Slave_IO_State: Waiting for master to send event
                  Master_Host: 192.168.86.12
                  Master_User: myslave
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: master-bin.000001
          Read_Master_Log_Pos: 1750
               Relay_Log_File: relay-log-bin.000002
                Relay_Log_Pos: 321
        Relay_Master_Log_File: master-bin.000001
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
              Replicate_Do_DB: 

把slave01、slave02两个从库必须设置为只读模式

mysql> set global read_only=1;　
Query OK, 0 rows affected (0.00 sec)

6.11、 Master 主数据库插入数据，测试是否同步

mysql> create database student;
Query OK, 1 row affected (0.01 sec)

mysql> use student;
Database changed
mysql> create table student(id int,name char(5),age int);
Query OK, 0 rows affected (0.01 sec)

mysql> insert into student values(1,'lmn',22);
Query OK, 1 row affected (0.00 sec)

mysql> select * from student;
+------+------+------+
| id   | name | age  |
+------+------+------+
|    1 | abc  |   22 |
+------+------+------+
1 row in set (0.00 sec)

mysql> 

到slave01、salve02 查看数据是否同步

select * from student.student;

7、部署MHA

先把三台机器，master01、slave01、slave02中的

[root@slave01 mha4mysql-manager-0.57]# vim /etc/my.cnf
## 把utf-8的段落#注释掉

Master01、Slave01、Slave02 所有服务器上都安装 MHA 依赖的环境，首先安装 epel 源

[root@master01 bin]# yum install epel-release --nogpgcheck -y

[root@master01 bin]# 
## 复制下面代码下载
yum install -y perl-DBD-MySQL \
perl-Config-Tiny \
perl-Log-Dispatch \
perl-Parallel-ForkManager \
perl-ExtUtils-CBuilder \
perl-ExtUtils-MakeMaker \
perl-CPAN

Master01、Slave01、Slave02所有服务器上必须先安装 node 组件

[root@slave01 opt]# tar zxvf mha4mysql-node-0.57.tar.gz
[root@slave01 opt]# cd mha4mysql-node-0.57
[root@slave01 mha4mysql-node-0.57]# perl Makefile.PL
[root@slave01 mha4mysql-node-0.57]# make && make install

slave01 节点服务器上安装 manager 组件

[root@slave01 mha4mysql-node-0.57]# cd /opt/
[root@slave01 opt]# tar zxvf mha4mysql-manager-0.57.tar.gz
[root@slave01 opt]# cd mha4mysql-manager-0.57
[root@slave01 mha4mysql-manager-0.57]# perl Makefile.PL
[root@slave01 mha4mysql-manager-0.57]# make && make install

Master01、Slave01、Slave02所有服务器上配置无密码认证

按master01 上配置到数据库节点 slave01 和 slave02 的无密码认证，模板为例三台分别设置，注意manager节点（slave01节点）需要ssh三台SQL机器，其余slave02,master01只需要ssh其它两台机器

[root@master01 mha4mysql-node-0.57]# ssh-keygen -t rsa
##一直回车结束
[root@master01 mha4mysql-node-0.57]# ssh-copy-id 192.168.86.10
## 输入登录密码即可
[root@master01 mha4mysql-node-0.57]# ssh-copy-id 192.168.86.11
## 输入登录密码即可
[root@slave01 sbin]# ssh-copy-id 192.168.86.12
## 输入登录密码即可

slave1:192.168.86.10 上配置 MHA

[root@slave01 mha4mysql-manager-0.57]# cp -rp /opt/mha4mysql-manager-0.57/samples/scripts/ /usr/local/bin/

[root@slave01 mha4mysql-manager-0.57]# ll /usr/local/bin/

复制上述的自动切换时 VIP 管理的脚本到 /usr/local/bin 目录，使用master_ip_failover脚本来管理 VIP 和故障切换

[root@slave01 mha4mysql-manager-0.57]# vim /usr/local/bin/master_ip_failover


#!/usr/bin/env perl
use strict;
use warnings FATAL => 'all';
 
use Getopt::Long;
 
my (
$command, $ssh_user, $orig_master_host, $orig_master_ip,
$orig_master_port, $new_master_host, $new_master_ip, $new_master_port
);
#############################添加内容部分#########################################
my $vip = '192.168.86.100';    #指定vip的地址
my $brdc = '192.168.86.255';   #指定vip的广播地址
my $ifdev = 'ens33';    #指定vip绑定的网卡
my $key = '1';  #指定vip绑定的虚拟网卡序列号
my $ssh_start_vip = "/sbin/ifconfig ens33:$key $vip";   #代表此变量值为ifconfig ens33:1 192.168.86.100
my $ssh_stop_vip = "/sbin/ifconfig ens33:$key down";    #代表此变量值为ifconfig ens33:1 192.168.86.100 down
my $exit_code = 0;  #指定退出状态码为0
#my $ssh_start_vip = "/usr/sbin/ip addr add $vip/24 brd $brdc dev $ifdev label $ifdev:$key;/usr/sbin/arping -q -A -c 1 -I $ifdev $vip;iptables -F;";
#my $ssh_stop_vip = "/usr/sbin/ip addr del $vip/24 dev $ifdev label $ifdev:$key";
##################################################################################
GetOptions(
'command=s' => \$command,
'ssh_user=s' => \$ssh_user,
'orig_master_host=s' => \$orig_master_host,
'orig_master_ip=s' => \$orig_master_ip,
'orig_master_port=i' => \$orig_master_port,
'new_master_host=s' => \$new_master_host,
'new_master_ip=s' => \$new_master_ip,
'new_master_port=i' => \$new_master_port,
);
 
exit &main();
 
sub main {
 
print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
 
if ( $command eq "stop" || $command eq "stopssh" ) {
 
my $exit_code = 1;
eval {
print "Disabling the VIP on old master: $orig_master_host \n";
&stop_vip();
$exit_code = 0;
};
if ($@) {
warn "Got Error: $@\n";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "start" ) {
 
my $exit_code = 10;
eval {
print "Enabling the VIP - $vip on the new master - $new_master_host \n";
&start_vip();
$exit_code = 0;
};
if ($@) {
warn $@;
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "status" ) {
print "Checking the Status of the script.. OK \n";
exit 0;
}
else {
&usage();
exit 1;
}
}
sub start_vip() {
`ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
## A simple system call that disable the VIP on the old_master
sub stop_vip() {
`ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}
 
sub usage {
print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}

创建 MHA 软件目录并拷贝配置文件，使用app1.cnf配置文件来管理 mysql 节点服务器

[root@slave01 mha4mysql-manager-0.57]# mkdir /etc/masterha
[root@slave01 mha4mysql-manager-0.57]# cp /opt/mha4mysql-manager-0.57/samples/conf/app1.cnf /etc/masterha

[root@slave01 mha4mysql-manager-0.57]# vim /etc/masterha/app1.cnf
#删除原有内容，直接复制并修改节点服务器的IP地址

[server default]
manager_log=/var/log/masterha/app1/manager.log
manager_workdir=/var/log/masterha/app1
master_binlog_dir=/usr/local/mysql/data
master_ip_failover_script=/usr/local/bin/master_ip_failover
master_ip_online_change_script=/usr/local/bin/master_ip_online_change
password=manager
ping_interval=1
remote_workdir=/tmp
repl_password=123456
repl_user=myslave
secondary_check_script=/usr/local/bin/masterha_secondary_check -s 192.168.86.10 -s 192.168.86.11
shutdown_script=""
ssh_user=root
user=mha
  
[server1]
hostname=192.168.86.12
port=3306
  
[server2]
candidate_master=1
check_repl_delay=0
hostname=192.168.86.10
port=3306
  
[server3]
hostname=192.168.86.11
port=3306

首次配置需要在 Master 服务器上手动开启虚拟IP

[root@master01 mha4mysql-node-0.57]# /sbin/ifconfig ens33:1 192.168.86.100/24
[root@master01 mha4mysql-node-0.57]# ifconfig 

manager 节点上测试 ssh 无密码认证，如果正常最后会输出 successfully

[root@slave01 mha4mysql-manager-0.57]# masterha_check_ssh -conf=/etc/masterha/app1.cnf

manager （slave01）节点上启动 MHA 并查看MHA状态以及日志

[root@slave01 mha4mysql-manager-0.57]# cd /usr/local/bin/
[root@slave01 bin]# ls
apply_diff_relay_logs  masterha_check_status    masterha_master_switch    purge_relay_logs
filter_mysqlbinlog     masterha_conf_host       masterha_secondary_check  save_binary_logs
masterha_check_repl    masterha_manager         masterha_stop             scripts
masterha_check_ssh     masterha_master_monitor  master_ip_failover
[root@slave01 bin]# chmod 777 master_ip_failover 
[root@slave01 bin]# ls
apply_diff_relay_logs  masterha_check_status    masterha_master_switch    purge_relay_logs
filter_mysqlbinlog     masterha_conf_host       masterha_secondary_check  save_binary_logs
masterha_check_repl    masterha_manager         masterha_stop             scripts
masterha_check_ssh     masterha_master_monitor  master_ip_failover

[root@slave01 bin]# masterha_check_repl -conf=/etc/masterha/app1.cnf

manager （slave01)节点上启动 MHA 并查看MHA状态以及日志

[root@slave01 bin]# nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1 &
[1] 105675
[root@slave01 bin]# masterha_check_status --conf=/etc/masterha/app1.cnf
app1 (pid:105675) is running(0:PING_OK), master:192.168.86.12
[root@slave01 bin]# cat /var/log/masterha/app1/manager.log | grep "current master"
Thu Jan  4 16:34:16 2024 - [info] Checking SSH publickey authentication settings on the current master..
192.168.86.12(192.168.86.12:3306) (current master)

8、故障切换测试

Master01 服务器上停止mysql服务

[root@master01 mha4mysql-node-0.57]# systemctl stop mysqld.service 
[root@master01 mha4mysql-node-0.57]# ifconfig

manager 服务器（slave01）上监控观察日志记录，已切换成功

[root@slave01 ~]# cat /var/log/masterha/app1/manager.log

查看slave01服务器，此时vip漂移到新的master上，已启用备用数据库

[root@slave01 ~]# ifconfig

9、故障修复

修复MySQL

[root@master01 mha4mysql-node-0.57]# systemctl restart mysqld.service 

修复主从 #在现主库服务器 slave01查看二进制文件和同步点

[root@slave01 bin]# mysql -uroot -p123456
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.7.17-log Source distribution

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> show master status;
+-------------------+----------+--------------+------------------+-------------------+
| File              | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+-------------------+----------+--------------+------------------+-------------------+
| master-bin.000002 |      154 |              |                  |                   |
+-------------------+----------+--------------+------------------+-------------------+
1 row in set (0.00 sec)

#在原主库服务器 mysql1 执行同步操作

[root@master01 mha4mysql-node-0.57]# mysql -uroot -p123456
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 5
Server version: 5.7.17-log Source distribution

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> change master to master_host='192.168.86.10',master_user='myslave',master_password='123456',master_log_file='master-bin.000002',master_log_pos=154;
Query OK, 0 rows affected, 2 warnings (0.01 sec)

mysql> start slave;
Query OK, 0 rows affected (0.00 sec)

mysql> show slave status\G
*************************** 1. row ***************************
               Slave_IO_State: Waiting for master to send event
                  Master_Host: 192.168.86.10
                  Master_User: myslave
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: master-bin.000002
          Read_Master_Log_Pos: 154
               Relay_Log_File: master01-relay-bin.000002
                Relay_Log_Pos: 321
        Relay_Master_Log_File: master-bin.000002
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes

在 manager 节点上修改配置文件app1.cnf（再把这个记录添加进去，因为它检测掉失效时候会自动消失）

[root@slave01 bin]# vim /etc/masterha/app1.cnf 
[server default]
manager_log=/var/log/masterha/app1/manager.log
manager_workdir=/var/log/masterha/app1
master_binlog_dir=/usr/local/mysql/data
master_ip_failover_script=/usr/local/bin/master_ip_failover
master_ip_online_change_script=/usr/local/bin/master_ip_online_change
password=manager
ping_interval=1
remote_workdir=/tmp
repl_password=123456
repl_user=myslave
secondary_check_script=/usr/local/bin/masterha_secondary_check -s 192.168.86.10 -s 192.168.86.11
shutdown_script=""
ssh_user=root
user=mha
  
[server1]
hostname=192.168.86.12
port=3306
  
[server2]
candidate_master=1
check_repl_delay=0
hostname=192.168.86.10
port=3306
  
[server3]
hostname=192.168.86.11
port=3306

在 manager 节点上启动 MHA

[root@slave01 bin]#  nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/masterha/app1/manager.log 2>&1 &
[2] 112914
[root@slave01 bin]# masterha_check_status --conf=/etc/masterha/app1.cnf
app1 (pid:108469) is running(0:PING_OK), master:192.168.86.10
[root@slave01 bin]# cat /var/log/masterha/app1/manager.log | grep "current master"
Thu Jan  4 17:48:15 2024 - [info] Checking SSH publickey authentication settings on the current master..
192.168.86.10(192.168.86.10:3306) (current master)
[root@slave01 bin]# 

ps:目前文档在桌面二阶段考试实验