GE HYDRAN M2气体监测系统

1. 气体监测： HYDRAN M2系统能够监测变压器或油冷却电缆系统中的气体，包括氢气、乙炔、甲烷、乙烷和乙烯等。这些气体的生成和积累可能是绝缘材料故障的迹象。

2. 实时监测： 该系统能够实时监测气体浓度的变化，以及油的温度和压力等参数。这有助于及早发现潜在问题。

3. 警报和通知： 当检测到气体浓度超出预定的阈值时，HYDRAN M2系统会发出警报，通知操作人员或维护人员采取行动。这有助于减少潜在的设备损坏或事故风险。

4. 数据记录： 系统通常具有数据记录和存储功能，可供后续分析和报告使用。这有助于追踪设备的健康状况和性能历史。

5. 远程监测： 一些HYDRAN M2系统具有远程监测功能，允许用户通过网络远程访问和监控设备的状态。

6. 自诊断： 系统通常具有自诊断功能，能够检测到传感器故障或系统问题，并发出相应的警报。

7. 适用范围： 这种类型的气体监测系统通常用于变电站、电力分配设备、变压器和其他需要保持绝缘材料完整性的电力设备。

8. 维护： HYDRAN M2系统通常需要定期维护，包括传感器的定期校准和维护。

Gas monitoring: The HYDRAN M2 system can monitor gases in transformers or oil cooled cable systems, including hydrogen, acetylene, methane, ethane, and ethylene. The generation and accumulation of these gases may be signs of insulation material failure.
Real time monitoring: This system can monitor changes in gas concentration, as well as parameters such as oil temperature and pressure in real time. This helps to identify potential issues early on.
Alarm and notification: When gas concentration is detected to exceed a predetermined threshold, the HYDRAN M2 system will issue an alarm to notify operators or maintenance personnel to take action. This helps to reduce the potential risk of equipment damage or accidents.
Data recording: Systems typically have data recording and storage functions, which can be used for subsequent analysis and reporting. This helps track the health status and performance history of the device.
Remote monitoring: Some HYDRAN M2 systems have remote monitoring capabilities, allowing users to remotely access and monitor the status of devices through the network.
Self diagnosis: Systems typically have a self diagnosis function, which can detect sensor faults or system issues and issue corresponding alarms.
Scope of application: This type of gas monitoring system is usually used in substations, power distribution equipment, transformers, and other power equipment that need to maintain the integrity of insulation materials.
Maintenance: The HYDRAN M2 system usually requires regular maintenance, including regular calibration and maintenance of sensors.