分析00 00 00 01 67 42 00 1E 99 A0 B1 31 00 00 00 01
H264的数据流分为两种,一种是NAL UNIT stream(RTP),一种是 bits stream,
两者可以互相转换。我们分析的这个是 bit stream,根据Annex B
00 00 00 01 67 42 00 1E 99 A0 B1 31 是 一个NAL,在两个00 00 00 01之间
0110 0111 0100 0010 0000 0000 0001 1110 1001 1001 1010 0000 1011 0001 0011 0001
forbidden_zero_bit(1) = 0
nal_ref_idc(2)= 11
nal_unit_type(5) = 0 0111:seq_parameter_set_rbsp( )
所以 processSPS
0110 0111 0100 0010 0000 0000 0001 1110 1001 1001 1010 0000 1011 0001 0011 0001
profile_idc(8):42:0100 0010
0110 0111 0100 0010 0000 0000 0001 1110 1001 1001 1010 0000 1011 0001 0011 0001
constraint_set0_flag(1):0
constraint_set1_flag(1):0
constraint_set2_flag(1):0
constraint_set3_flag(1):0
reserved_zero_4bits(4):0
0110 0111 0100 0010 0000 0000 0001 1110 1001 1001 1010 0000 1011 0001 0011 0001
level_idc(8):1E
seq_parameter_set_id(UE(V)):
ue(v): unsigned integer Exp-Golomb-coded syntax element with the left bit first. The parsing process for this descriptor is specified in subclause 9.1
uvlC: 1001:根据Table9.1 , value= 0,只占1bit.
根据profile_idc忽略掉一部分。
log2_max_frame_num_minus4(ue(v): 001 10,len = 5,value= 5
pic_order_cnt_type(ue(v)):01 1,len = 3,value = 2
根据pic_order_cnt_type忽略几个参数
num_ref_frames(ue):010,len = 3,value = 1
0110 0111 0100 0010 0000 0000 0001 1110 1001 1001 1010 0000 1011 0001 0011 0001
gaps_in_frame_num_value_allowed_flag(1) = 0
pic_width_in_mbs_minus1(ue):000 1011 ,len = 7,value = 10;
pic_height_in_map_units_minus1(ue):0001 001,len = 7,value = 8
frame_mbs_only_flag(1) = 1
忽略1
direct_8x8_inference_flag(1):0
忽略
vui_parameters_present_flag(1):0
忽略
NALU结束
分析00 00 00 01 68 CE 38 80 00 00 00 01
0110 1000(68)
forbidden_zero_bit(1) = 0
nal_ref_idc(2)= 11
nal_unit_type(5) =01000:pic_parameter_set_rbsp( ),7.3.2.2
1100 (C)
pic_parameter_set_id (ue)=0
seq_parameter_set_id(ue)=0
entropy_coding_mode_flag(1) :0, 重要的flag,0 表示编码Exp-Golomb coded and CAVLC,1表示CABAC
pic_order_present_flag(1):0
1110 (E)
num_slice_groups_minus1(ue):0
忽略
num_ref_idx_l0_active_minus1(ue):0
num_ref_idx_l1_active_minus1(ue):0
weighted_pred_flag(1);0
0011 1000 1000 0000 (38 80)
weighted_bipred_idc(2):00
pic_init_qp_minus26 /* relative to 26 */(se):0
pic_init_qs_minus26 /* relative to 26 */(se):0
chroma_qp_index_offset(se):0
deblocking_filter_control_present_flag(1);0
constrained_intra_pred_flag(1):0
redundant_pic_cnt_present_flag(1):0
忽略
NALU结束
65 88 80 21 71 27 1B 88…….3888*16 byte
65:0110 0101
forbidden_zero_bit(1) = 0
nal_ref_idc(2)= 11
nal_unit_type(5) =0 0101:slice_layer_without_partitioning_rbsp( ),IDR浈
Slice
Slice_Header:
first_mb_in_slice(ue):0
slice_type(ue):000 1000 = 7
pic_parameter_set_id(ue) = 0
80 21:000 0000 0010 0001
frame_num(u(v): frame_num is used as an identifier for pictures and shall be represented by log2_max_frame_num_minus4 + 4 bits,9 bits = 0
忽略
if( nal_unit_type = = 5 ) //IDR frame
idr_pic_id(u(e)):0
忽略N多
ref_pic_list_reordering( ) 见7。3。3。1忽略,Islice,SI slice,B slice
nal_ref_idc =11 所以dec_ref_pic_marking( )
nal_unit_type = 5,所以
no_output_of_prior_pics_flag(1):0
long_term_reference_flag(1):0
忽略
。。71 27
001 0111 0001 0010 0111
slice_qp_delta(se(v):001 01 ,4:-2
忽略
slice_data( ):7.3.4
对I-Slice:忽略N多
进入if( moreDataFlag ) { if( MbaffFrameFlag && ( CurrMbAddr % 2 = = 0 | | ( CurrMbAddr % 2 = = 1 && prevMbSkipped ) ) )mb_field_decoding_flag
macroblock_layer( )}
mb_field_decoding_flag忽略
macroblock_layer( )
mb_type(ue(v):0
mb_pred( mb_type )
prev_intra4x4_pred_mode_flag[ luma4x4BlkIdx ] (1bit, 对babac是ae(v)):1
1 27:0001 0010 0111
prev_intra4x4_pred_mode_flag[ 1 ] : 0001,0,001
0010 0111
prev_intra4x4_pred_mode_flag[ 2 ] : 0010,0,010
prev_intra4x4_pred_mode_flag[ 3] : 0111,0,111
……16个
1b 88 00 3e cf.
intra_chroma_pred_mode(ue(v)) : 最后的一个1bit:0
接下来是macroblock_layer的coded_block_pattern和run level,既系数
c0 06 ad a0 18
1100 0000 0000 0110 1010 0000 0001 1000
coded_block_pattern(me(v):0,根据,= 47,0x2f
mb_qp_delta(se(v):0 len =1
residual( )见7.3.5.3
residual_block( LumaLevel[ i8x8 * 4 + i4x4 ], 16 )
coeff_token(ce(v): 00 0000 0000 0110 1
nc = 0(left block and top block 相关的):
len: { // 0702
{ 1, 6, 8, 9,10,11,13,13,13,14,14,15,15,16,16,16,16},
{ 0, 2, 6, 8, 9,10,11,13,13,14,14,15,15,15,16,16,16},
{ 0, 0, 3, 7, 8, 9,10,11,13,13,14,14,15,15,16,16,16},
{ 0, 0, 0, 5, 6, 7, 8, 9,10,11,13,14,14,15,15,16,16},
},
{
{ 2, 6, 6, 7, 8, 8, 9,11,11,12,12,12,13,13,13,14,14},
{ 0, 2, 5, 6, 6, 7, 8, 9,11,11,12,12,13,13,14,14,14},
{ 0, 0, 3, 6, 6, 7, 8, 9,11,11,12,12,13,13,13,14,14},
{ 0, 0, 0, 4, 4, 5, 6, 6, 7, 9,11,11,12,13,13,13,14},
},
{
{ 4, 6, 6, 6, 7, 7, 7, 7, 8, 8, 9, 9, 9,10,10,10,10},
{ 0, 4, 5, 5, 5, 5, 6, 6, 7, 8, 8, 9, 9, 9,10,10,10},
{ 0, 0, 4, 5, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9,10,10,10},
{ 0, 0, 0, 4, 4, 4, 4, 4, 5, 6, 7, 8, 8, 9,10,10,10},
},
code:
{ 1, 5, 7, 7, 7, 7,15,11, 8,15,11,15,11,15,11, 7,4},
{ 0, 1, 4, 6, 6, 6, 6,14,10,14,10,14,10, 1,14,10,6},
{ 0, 0, 1, 5, 5, 5, 5, 5,13, 9,13, 9,13, 9,13, 9,5},
{ 0, 0, 0, 3, 3, 4, 4, 4, 4, 4,12,12, 8,12, 8,12,8},
},
{
{ 3,11, 7, 7, 7, 4, 7,15,11,15,11, 8,15,11, 7, 9,7},
{ 0, 2, 7,10, 6, 6, 6, 6,14,10,14,10,14,10,11, 8,6},
{ 0, 0, 3, 9, 5, 5, 5, 5,13, 9,13, 9,13, 9, 6,10,5},
{ 0, 0, 0, 5, 4, 6, 8, 4, 4, 4,12, 8,12,12, 8, 1,4},
},
{
{15,15,11, 8,15,11, 9, 8,15,11,15,11, 8,13, 9, 5,1},
{ 0,14,15,12,10, 8,14,10,14,14,10,14,10, 7,12, 8,4},
{ 0, 0,13,14,11, 9,13, 9,13,10,13, 9,13, 9,11, 7,3},
{ 0, 0, 0,12,11,10, 9, 8,13,12,12,12, 8,12,10, 6,2},
},
根据表查的:
code = 13,len = 15,i= 12,j=2
所以numcoeff = 12,numtrailingones = 2
010 0000 0001 1000: totalzeros:根据numcoeff
int lentab[TOTRUN_NUM][16] =
{
{ 1,3,3,4,4,5,5,6,6,7,7,8,8,9,9,9},
{ 3,3,3,3,3,4,4,4,4,5,5,6,6,6,6},
{ 4,3,3,3,4,4,3,3,4,5,5,6,5,6},
{ 5,3,4,4,3,3,3,4,3,4,5,5,5},
{ 4,4,4,3,3,3,3,3,4,5,4,5},
{ 6,5,3,3,3,3,3,3,4,3,6},
{ 6,5,3,3,3,2,3,4,3,6},
{ 6,4,5,3,2,2,3,3,6},
{ 6,6,4,2,2,3,2,5},
{ 5,5,3,2,2,2,4},
{ 4,4,3,3,1,3},
{ 4,4,2,1,3}, numcoeff开始
{ 3,3,1,2},
{ 2,2,1},
{ 1,1},
};
int codtab[TOTRUN_NUM][16] =
{
{1,3,2,3,2,3,2,3,2,3,2,3,2,3,2,1},
{7,6,5,4,3,5,4,3,2,3,2,3,2,1,0},
{5,7,6,5,4,3,4,3,2,3,2,1,1,0},
{3,7,5,4,6,5,4,3,3,2,2,1,0},
{5,4,3,7,6,5,4,3,2,1,1,0},
{1,1,7,6,5,4,3,2,1,1,0},
{1,1,5,4,3,3,2,1,1,0},
{1,1,1,3,3,2,2,1,0},
{1,0,1,3,2,1,1,1,},
{1,0,1,3,2,1,1,},
{0,1,1,2,1,3},
{0,1,1,1,1}, numcoeff开始
{0,1,1,1},
{0,1,1},
{0,1},
};