PUTTY登陆后，ls如何显示颜色

使用putty登录linux后有时会出现没有颜色，全部为白色，这时要设置相应的颜色配置。

针对不同系统设置不同，

1、对于Ubuntu和Debian系统，修改/etc/bash.bashrc，加入如下：

alias ls='ls --color'
LS_COLORS='di=94:fi=0:ln=31:pi=5:so=5:bd=5:cd=5:or=31:mi=0:ex=35:*.rpm=90'
export LS_COLORS

退出，再用putty登录即可显示出颜色。（如果上述设置只在~/.bashrc下，那么每次登录都要source一下，很不方便）

2、对于redhat系列，在/ect/DIR_color里有相应的颜色设置

附颜色对照表（从别人网页摘来的）：

alias ls='ls --color'
LS_COLORS='di=1:fi=0:ln=31:pi=5:so=5:bd=5:cd=5:or=31:mi=0:ex=35:*.rpm=90'
export LS_COLORS

The first line makes ls use the --color parameter by default, which tells ls to display files in different colours based on the setting of the LS_COLORS variable.

The second line is the tricky one, and what I have worked out so far has been by trial and error. The parameters (di, fi, etc.) refer to different Linux file types. I have worked them out as shown

di = directory
fi = file
ln = symbolic link
pi = fifo file
so = socket file
bd = block (buffered) special file
cd = character (unbuffered) special file
or = symbolic link pointing to a non-existent file (orphan)
mi = non-existent file pointed to by a symbolic link (visible when you type ls -l)
ex = file which is executable (ie. has 'x' set in permissions).

The *.rpm=90 parameter at the end tells ls to display any files ending in .rpm in the specified colour, in this case colour 90 (dark grey). This can be applied to any types of files (eg. you could use '*.png=35' to make jpeg files appear purple.) As many or as few parameters as you like can go into the LS_COLORS variable, as long as the parameters are separated by colons.

Using trial and error (and a little bash script I wrote... my first one ever! :) I worked out all the colour codes, at least my interpretation of them -

0   = default colour
1   = bold
4   = underlined
5   = flashing text
7   = reverse field
31 = red
32 = green
33 = orange
34 = blue
35 = purple
36 = cyan
37 = grey
40 = black background
41 = red background
42 = green background
43 = orange background
44 = blue background
45 = purple background
46 = cyan background
47 = grey background
90 = dark grey
91 = light red
92 = light green
93 = yellow
94 = light blue
95 = light purple
96 = turquoise
100 = dark grey background
101 = light red background
102 = light green background
103 = yellow background
104 = light blue background
105 = light purple background
106 = turquoise background

These can even be combined, so that a parameter like:
di=5;31;42
in your LS_COLORS variable would make directories appear in flashing red text with a green background!

Setting LS_COLORS does more than just make your ls listings look pretty (although it certainly does do that), it is also very helpful in identifying files while wading through a file system.

LS_COLORS='no=00:fi=00:di=01;33:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=0
1;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32
:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;3
1:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm
=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:'
这个是我的系统里经常用的颜色配置，还不错。