linux 3.10在mini210s上移植----02.minicom安装

安装配置minicom
--------------------------------------------------
# lsmod | grep usbserial (如果直接使用串口线，而没有用到USB转串口设备，此步可以跳过)
   如果有usbserial，说明系统支持USB转串口。

安装minicom (Fedora自带有minicom，此步可以跳过)
   apt-get install minicom
   apt-get install lrzsz
配置minicom
   # minicom -s
   Serial port setup [Enter]
    +-------------------------------------------------------------+
    | A -    Serial Device      : /dev/ttyUSB0                    |
    | B - Lockfile Location     : /var/lock                       |
    | C -   Callin Program      :                                 |
    | D - Callout Program      -:                                 |
    | E -    Bps/Par/Bits       : 115200 8N1                      |
    | F - Hardware Flow Control : No                              |
    | G - Software Flow Control : No                              |
    |                                                             |
    |    Change which setting?                                    |
    +-------------------------------------------------------------+
注: 如果没有使用USB转接口，Serial Device要配置为 /dev/ttyS0

   Save setup as dfl
   Exit from Minicom


--------------------------------------------------
# minicom
(Ctrl + a) --> s --> zmodem --> [Okay] -->
   
    +-----------------------------------------+
    |No file selected - enter filename:       |
    |> /home/zxl/ssl/codes/led/lls_led.ko     | [Enter]
    +-----------------------------------------+