文章目录
Android 11(Android Q)分区挂载过程分析
uboot 启动
1.bsp/bootloader/u-boot15/arch/arm/cpu/armv8/start.S：
进行CPU，中断，寄存器，时钟等的初始化，然后进行lowlevel_init，最后跳转到_main函数入口，
2.main函数
定义在bsp/bootloader/u-boot15/arch/arm/lib/crt0.S ，在main函数中，初始化CPU，SPL，以及各个内存段初始化，bl board_init_f，调用board_init_f函数。
3.bsp/bootloader/u-boot15/arch/arm/lib/board.c
对cache,board,cpu_clk,serial,log,mem,flash,env,malloc mem,nand,mmc, BOOT_DEVICE_UFS,BOOT_DEVICE_EMMC,board_mmc_initialize,scsi_init,dataflash,arm_pci_init,stdio_initapi_init,console_init_r,misc_init_r,interrupt_init,board_late_init。最后跳转到main_loop。
787 for (;;) {
788 main_loop();
789 }
4.main_loop
/**/
modem_init();
/**/
cli_init();
/**/
run_preboot_environment_command();
/**/
s = bootdelay_process();
/**/
cli_secure_boot_cmd(s);
/**/
autoboot_command(s);
/**/
cli_loop();
56 void main_loop(void)
57 {
58 const char *s;
59
60 bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop");
61
62 #ifndef CONFIG_SYS_GENERIC_BOARD
63 debug("Warning: Your board does not use generic board. Please read\n");
64 debug("doc/README.generic-board and take action. Boards not\n");
65 debug("upgraded by the late 2014 may break or be removed.\n");
66 #endif
67
68 modem_init();
69 #ifdef CONFIG_VERSION_VARIABLE
70 setenv("ver", version_string); /* set version variable */
71 #endif /* CONFIG_VERSION_VARIABLE */
72
73 cli_init();
74
75 run_preboot_environment_command();
76
77 #if defined(CONFIG_UPDATE_TFTP)
78 update_tftp(0UL);
79 #endif /* CONFIG_UPDATE_TFTP */
80 //bootm console 超时以后自动启动getenv("bootm")的值，执行启动。
81 s = bootdelay_process();
82 if (cli_process_fdt(&s))
83 cli_secure_boot_cmd(s);
84 //在进行自动启动时，获取menucmd的环境变量的值，然后执行该命令。
85 autoboot_command(s);
86 //当uboot console 获取到了指令后，会之下下面的语句，循环获取console的指令，采用了hush shell 获取，解析，执行命令。
87 cli_loop();
88 }
212 void cli_init(void)
213 {
214 #ifdef CONFIG_SYS_HUSH_PARSER
215 u_boot_hush_start();
216 #endif
217
218 #if defined(CONFIG_HUSH_INIT_VAR)
219 hush_init_var();
220 #endif
221 }
初始化并配置hush
271 struct variables {
272 char *name;
273 char *value;
274 int flg_export;
275 int flg_read_only;
276 struct variables *next;
277 };
3291 int u_boot_hush_start(void)
3292 {
3293 if (top_vars == NULL) {
3294 top_vars = malloc(sizeof(struct variables));
3295 top_vars->name = "HUSH_VERSION";
3296 top_vars->value = "0.01";
3297 top_vars->next = NULL;
3298 top_vars->flg_export = 0;
3299 top_vars->flg_read_only = 1;
3300 #ifdef CONFIG_NEEDS_MANUAL_RELOC
3301 u_boot_hush_reloc();
3302 #endif
3303 }
3304 return 0;
3305 }
423 #if defined(CONFIG_HUSH_INIT_VAR)
424 int hush_init_var(void)
425 {
426 ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
427 return 0;
428 }
429 #endif
304 const char *bootdelay_process(void)
305 {
306 char *s;
307 int bootdelay;
308 #ifdef CONFIG_BOOTCOUNT_LIMIT
309 unsigned long bootcount = 0;
310 unsigned long bootlimit = 0;
311 #endif /* CONFIG_BOOTCOUNT_LIMIT */
312
313 #ifdef CONFIG_BOOTCOUNT_LIMIT
314 bootcount = bootcount_load();
315 bootcount++;
316 bootcount_store(bootcount);
317 setenv_ulong("bootcount", bootcount);
318 bootlimit = getenv_ulong("bootlimit", 10, 0);
319 #endif /* CONFIG_BOOTCOUNT_LIMIT */
320
321 s = getenv("bootdelay");
322 bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;
323
324 #ifdef CONFIG_OF_CONTROL
325 bootdelay = fdtdec_get_config_int(gd->fdt_blob, "bootdelay",
326 bootdelay);
327 #endif
328
329 debug("### main_loop entered: bootdelay=%d\n\n", bootdelay);
330
331 #if defined(CONFIG_MENU_SHOW)
332 bootdelay = menu_show(bootdelay);
333 #endif
334 bootretry_init_cmd_timeout();
335
336 #ifdef CONFIG_POST
337 if (gd->flags & GD_FLG_POSTFAIL) {
338 s = getenv("failbootcmd");
339 } else
340 #endif /* CONFIG_POST */
341 #ifdef CONFIG_BOOTCOUNT_LIMIT
342 if (bootlimit && (bootcount > bootlimit)) {
343 printf("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n",
344 (unsigned)bootlimit);
345 s = getenv("altbootcmd");
346 } else
347 #endif /* CONFIG_BOOTCOUNT_LIMIT */
348 s = getenv("bootcmd");
349
350 process_fdt_options(gd->fdt_blob);
351 stored_bootdelay = bootdelay;
352
353 return s;
354 }
循环执行cli 处理uboot console 指令
201 void cli_loop(void)
202 {
203 #ifdef CONFIG_SYS_HUSH_PARSER
204 parse_file_outer();
205 /* This point is never reached */
206 for (;;);
207 #else
208 cli_simple_loop();
209 #endif /*CONFIG_SYS_HUSH_PARSER*/
210 }
211
212 void cli_init(void)
213 {
214 #ifdef CONFIG_SYS_HUSH_PARSER
215 u_boot_hush_start();
216 #endif
217
218 #if defined(CONFIG_HUSH_INIT_VAR)
219 hush_init_var();
220 #endif
221 }
simple 解析函数
259 void cli_simple_loop(void)
260 {
261 static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, };
262
263 int len;
264 int flag;
265 int rc = 1;
266
267 for (;;) {
268 if (rc >= 0) {
269 /* Saw enough of a valid command to
270 * restart the timeout.
271 */
272 bootretry_reset_cmd_timeout();
273 }
274 len = cli_readline(CONFIG_SYS_PROMPT);
275
276 flag = 0; /* assume no special flags for now */
277 if (len > 0)
278 strcpy(lastcommand, console_buffer);
279 else if (len == 0)
280 flag |= CMD_FLAG_REPEAT;
281 #ifdef CONFIG_BOOT_RETRY_TIME
282 else if (len == -2) {
283 /* -2 means timed out, retry autoboot
284 */
285 puts("\nTimed out waiting for command\n");
286 # ifdef CONFIG_RESET_TO_RETRY
287 /* Reinit board to run initialization code again */
288 do_reset(NULL, 0, 0, NULL);
289 # else
290 return; /* retry autoboot */
291 # endif
292 }
293 #endif
294
295 if (len == -1)
296 puts("<INTERRUPT>\n");
297 else
298 rc = run_command_repeatable(lastcommand, flag);
299
300 if (rc <= 0) {
301 /* invalid command or not repeatable, forget it */
302 lastcommand[0] = 0;
303 }
304 }
305 }
hush 解析函数
3260 #ifndef __U_BOOT__
3261 static int parse_file_outer(FILE *f)//no excuese
3262 #else
3263 int parse_file_outer(void)
3264 #endif
3265 {
3266 int rcode;
3267 struct in_str input;
3268 #ifndef __U_BOOT__
3269 setup_file_in_str(&input, f);//no excuese
3270 #else
3271 setup_file_in_str(&input);
3272 #endif
3273 rcode = parse_stream_outer(&input, FLAG_PARSE_SEMICOLON);
3274 return rcode;
3275 }
326 /* I can almost use ordinary FILE *. Is open_memstream() universally
327 * available? Where is it documented? */
328 struct in_str {
329 const char *p;
330 #ifndef __U_BOOT__
331 char peek_buf[2];
332 #endif
333 int __promptme;
334 int promptmode;
335 #ifndef __U_BOOT__
336 FILE *file;
337 #endif
338 int (*get) (struct in_str *);
339 int (*peek) (struct in_str *);
340 };
//获取输入指令然后结构化
1130 #ifndef __U_BOOT__
1131 static void setup_file_in_str(struct in_str *i, FILE *f)
1132 #else
1133 static void setup_file_in_str(struct in_str *i)
1134 #endif
1135 {
1136 i->peek = file_peek;
1137 i->get = file_get;
1138 i->__promptme=1;
1139 i->promptmode=1;
1140 #ifndef __U_BOOT__
1141 i->file = f;
1142 #endif
1143 i->p = NULL;
1144 }
/* most recursion does not come through here, the exeception is
3157 * from builtin_source() */
3158 static int parse_stream_outer(struct in_str *inp, int flag)
3159 {
3160
3161 struct p_context ctx;
3162 o_string temp=NULL_O_STRING;
3163 int rcode;
3164 #ifdef __U_BOOT__
3165 int code = 1;
3166 #endif
3167 do {
3168 ctx.type = flag;
3169 initialize_context(&ctx);
3170 update_ifs_map();
3171 if (!(flag & FLAG_PARSE_SEMICOLON) || (flag & FLAG_REPARSING)) mapset((uchar *)";$&|", 0);
3172 inp->promptmode=1;
3173 rcode = parse_stream(&temp, &ctx, inp,
3174 flag & FLAG_CONT_ON_NEWLINE ? -1 : '\n');
3175 #ifdef __U_BOOT__
3176 if (rcode == 1) flag_repeat = 0;
3177 #endif
3178 if (rcode != 1 && ctx.old_flag != 0) {
3179 syntax();
3180 #ifdef __U_BOOT__
3181 flag_repeat = 0;
3182 #endif
3183 }
3184 if (rcode != 1 && ctx.old_flag == 0) {
3185 done_word(&temp, &ctx);
3186 done_pipe(&ctx,PIPE_SEQ);
3187 #ifndef __U_BOOT__
3188 run_list(ctx.list_head);
3189 #else
3190 code = run_list(ctx.list_head);
3191 if (code == -2) { /* exit */
3192 b_free(&temp);
3193 code = 0;
3194 /* XXX hackish way to not allow exit from main loop */
3195 if (inp->peek == file_peek) {
3196 printf("exit not allowed from main input shell.\n");
3197 continue;
3198 }
3199 break;
3200 }
3201 if (code == -1)
3202 flag_repeat = 0;
3203 #endif
3204 } else {
3205 if (ctx.old_flag != 0) {
3206 free(ctx.stack);
3207 b_reset(&temp);
3208 }
3209 #ifdef __U_BOOT__
3210 if (inp->__promptme == 0) printf("<INTERRUPT>\n");
3211 inp->__promptme = 1;
3212 #endif
3213 temp.nonnull = 0;
3214 temp.quote = 0;
3215 inp->p = NULL;
3216 free_pipe_list(ctx.list_head,0);
3217 }
3218 b_free(&temp);
3219 /* loop on syntax errors, return on EOF */
3220 } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP) &&
3221 (inp->peek != static_peek || b_peek(inp)));
3222 #ifndef __U_BOOT__
3223 return 0;
3224 #else
3225 return (code != 0) ? 1 : 0;
3226 #endif /* __U_BOOT__ */
3227 }
uboot引导启动：
//填入uboot 指令
400 U_BOOT_CMD(
401 cboot, CONFIG_SYS_MAXARGS, 1, do_cboot,
402 "choose boot mode",
403 "mode: \nrecovery, fastboot, dloader, charge, normal, vlx, caliberation.\n"
404 "cboot could enter a mode specified by the mode descriptor.\n"
405 "it also could enter a proper mode automatically depending on "
406 "the environment\n"
407 );
408
150 #define ll_entry_declare(_type, _name, _list) \
151 _type _u_boot_list_2_##_list##_2_##_name __aligned(4) \
152 __attribute__((unused, \
153 section(".u_boot_list_2_"#_list"_2_"#_name)))
148 #define CMD_FLAG_REPEAT 0x0001 /* repeat last command */
149 #define CMD_FLAG_BOOTD 0x0002 /* command is from bootd */
150 #define CMD_FLAG_ENV 0x0004 /* command is from the environment */
152 #ifdef CONFIG_AUTO_COMPLETE
153 # define _CMD_COMPLETE(x) x,
154 #else
155 # define _CMD_COMPLETE(x)
156 #endif
157 #ifdef CONFIG_SYS_LONGHELP
158 # define _CMD_HELP(x) x,
159 #else
160 # define _CMD_HELP(x)
161 #endif
163 #define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
164 _usage, _help, _comp) \
165 { #_name, _maxargs, _rep, _cmd, _usage, \
166 _CMD_HELP(_help) _CMD_COMPLETE(_comp) }
172 #define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \
173 ll_entry_declare(cmd_tbl_t, _name, cmd) = \
174 U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
175 _usage, _help, _comp);
177 #define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help) \
178 U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)
###main_loop: bootcmd=“cboot”
int do_cboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
323 {
324 volatile int i;
325 boot_mode_enum_type bootmode = CMD_UNDEFINED_MODE;
326 CBOOT_MODE_ENTRY boot_mode_array[CMD_MAX_MODE] ={0};
327
328 if(argc > 2)
329 return CMD_RET_USAGE;
330 #ifdef CONFIG_AUTOLOAD_MODE
331 autoload_mode();
332 #endif
333
334 #ifdef CONFIG_ANDROID_AB
335 do_selcet_ab();
336 #endif
337
338 #if defined CONFIG_AUTOBOOT
339 if (reboot_mode_check() == CMD_AUTODLOADER_REBOOT)
340 {
341 autodloader_mode();
342 }
343 else {
344 #if defined CONFIG_X86
345 write_sysdump_before_boot_extend();//if autoboot kernel is crash and reboot,the uboot go to sysdump in x86;
346 #endif
347 normal_mode();
348 }
349 #endif
350
351 #if defined CONFIG_ZEBU || defined CONFIG_FPGA
352 normal_mode();
353 #endif
354 boot_pwr_check();
355 if (2 == argc) {
356 /*argument has the highest priority to determine the boot mode*/
357 bootmode = get_mode_from_arg(argv[1]);
358 } else {
359 for (i = 0; i < CHECK_BOOTMODE_FUN_NUM; i++) {
360 if (0 == s_boot_func_array[i]) {
361 bootmode = CMD_POWER_DOWN_DEVICE;
362 break;
363 }
364 bootmode = s_boot_func_array[i]();
365 if (CMD_UNDEFINED_MODE == bootmode) {
366
367 continue;
368 } else {
369 debugf("get boot mode in boot func array[%d]\n",i);
370 break;
371 }
372 }
373 }
374
375 board_boot_mode_regist(boot_mode_array);
376
377 printf("enter boot mode %d\n", bootmode);
378
379 if ((bootmode > CMD_POWER_DOWN_DEVICE) &&(bootmode < CMD_MAX_MODE)&& (0 != boot_mode_array[bootmode])) {
380 write_log();
381
382 boot_mode_array[bootmode]();
383 } else {
384 #ifdef CONFIG_FPGA
385 /*FPGA has no power button ,if hasn't detect any mode ,use normal mode*/
386 debugf("FPGA use normal mode instead of power down.\n");
387 normal_mode();
388 #else
389 debugf("power down device\n");
390 write_log();
391 power_down_devices(0);
392 #endif
393 while(1);
394 }
395
396 return 0;
397 }
398
399
400 U_BOOT_CMD(
401 cboot, CONFIG_SYS_MAXARGS, 1, do_cboot,
402 "choose boot mode",
403 "mode: \nrecovery, fastboot, dloader, charge, normal, vlx, caliberation.\n"
404 "cboot could enter a mode specified by the mode descriptor.\n"
405 "it also could enter a proper mode automatically depending on "
406 "the environment\n"
407 );
//设置setenv("bootcmd", "cboot");
36 int do_role(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
37 {
38 #ifdef CONFIG_ZEBU
39 boot_mode_t boot_role = BOOTLOADER_MODE_LOAD;
40 #else
41 boot_mode_t boot_role = get_boot_role();
42 #endif
43 switch(boot_role) {
44 case BOOTLOADER_MODE_DOWNLOAD:
45 setenv("bootdelay", "0");
46 setenv("bootcmd", "download");
47 debugf("Get chipram env mode %x,go download\n", boot_role);
48 break;
49 case BOOTLOADER_MODE_LOAD:
50 setenv("bootcmd", "cboot");
51 debugf("Get chipram env mode %x,go cboot\n", boot_role);
52 break;
53 default :
54 printf("unkown uboot role ,nothing to do in preboot\n");
55 }
56
57 return 0;
58 }
59
60
61 U_BOOT_CMD(
62 role, CONFIG_SYS_MAXARGS, 1, do_role,
63 "choose the role of spreadtrum uboot",
64 "two roles:dloader and cboot\n"
65 );
定义启动函数：
110 CBOOT_FUNC s_boot_func_array[CHECK_BOOTMODE_FUN_NUM] = {
111 #ifdef CONFIG_SPRD_PLATFORM
112 //get_mode_from_bat_low,
113 write_sysdump_before_boot_extend,
114 /* 1 get mode from file*/
115 get_mode_from_file_extend,
116 /* 2 get mode from watch dog */
117 get_mode_from_watchdog,
118 /* 3 get mode from alarm register */
119 get_mode_from_alarm_register,
120 /* 0 get mode from calibration detect */
121 get_mode_from_calibration,
122 /*4 get mode from charger */
123 get_mode_from_charger,
124 /*5 get mode from keypad*/
125 get_mode_from_keypad,
126 0
127 #else
128 0
129 #endif
130 };
选择boot mode：
reboot_mode_check()
bootmode = get_mode_from_arg(argv[1]);
for (i = 0; i < CHECK_BOOTMODE_FUN_NUM; i++) {
360 if (0 == s_boot_func_array[i]) {
361 bootmode = CMD_POWER_DOWN_DEVICE;
362 break;
363 }
364 bootmode = s_boot_func_array[i]();
365 if (CMD_UNDEFINED_MODE == bootmode) {
366
367 continue;
368 } else {
369 debugf("get boot mode in boot func array[%d]\n",i);
370 break;
371 }
372 }
注册boot 函数：
board_boot_mode_regist(boot_mode_array);
81 CBOOT_FUNC s_boot_func_array[CHECK_BOOTMODE_FUN_NUM] = {
82 #ifndef CONFIG_FPGA
83 get_mode_from_bat_low,
84 write_sysdump_before_boot_extend,
85 /* 1 get mode from file*/
86 get_mode_from_file_extend,
87 /* 2 get mode from watch dog */
88 get_mode_from_watchdog,
89 /* 3 get mode from alarm register */
90 get_mode_from_alarm_register,
91 /* 0 get mode from calibration detect */
92 get_mode_from_pctool,
93 /*4 get mode from charger */
94 get_mode_from_charger,
95 /*5 get mode from keypad*/
96 get_mode_from_keypad,
97 0
98 #else
99 0
100 #endif
101 };
102
103 void board_boot_mode_regist(CBOOT_MODE_ENTRY *array)
104 {
105 MODE_REGIST(CMD_NORMAL_MODE, normal_mode);
106 MODE_REGIST(CMD_RECOVERY_MODE, recovery_mode);
107 MODE_REGIST(CMD_FASTBOOT_MODE, fastboot_mode);
108 MODE_REGIST(CMD_WATCHDOG_REBOOT, watchdog_mode);
109 MODE_REGIST(CMD_AP_WATCHDOG_REBOOT, ap_watchdog_mode);
110 MODE_REGIST(CMD_UNKNOW_REBOOT_MODE, unknow_reboot_mode);
111 MODE_REGIST(CMD_PANIC_REBOOT, panic_reboot_mode);
112 MODE_REGIST(CMD_AUTODLOADER_REBOOT, autodloader_mode);
113 MODE_REGIST(CMD_SPECIAL_MODE, special_mode);
114 MODE_REGIST(CMD_CHARGE_MODE, charge_mode);
115 MODE_REGIST(CMD_ENGTEST_MODE,engtest_mode);
116 MODE_REGIST(CMD_FACTORYTEST_MODE, factorytest_mode);
117 MODE_REGIST(CMD_CALIBRATION_MODE, calibration_mode);
118 MODE_REGIST(CMD_EXT_RSTN_REBOOT_MODE, normal_mode);
119 MODE_REGIST(CMD_IQ_REBOOT_MODE, iq_mode);
120 MODE_REGIST(CMD_ALARM_MODE, alarm_mode);
121 MODE_REGIST(CMD_SPRDISK_MODE, sprdisk_mode);
122 MODE_REGIST(CMD_AUTOTEST_MODE, autotest_mode);
123 return;
124 }
启动前secureboot验证img：
153 void unknow_reboot_mode(void)
154 {
155 debugf("unknow_reboot_mode\n");
156 setenv("bootmode", "unknowreboot");
157 vlx_nand_boot(BOOT_PART, BACKLIGHT_OFF, LCD_ON);
158 return;
159
160 }
232 void autodloader_mode(void)
233 {
234 debugf("Enter autodloader mode\n");
235
236 #ifdef CONFIG_ERASE_SPL_AUTO_DOWNLOAD
237 if (0 != erase_spl_enter_download_mode()) {
238 debugf("erase partition splloader and splloader_bak fail!\n");
239 debugf("enter old autodloader_mode!\n");
240 }
241 #endif
242
243 #if (defined CONFIG_X86) && (defined CONFIG_MOBILEVISOR) && (defined CONFIG_SPRD_SOC_SP9853I)
244 tos_start_notify();
245 #endif
246
247 #ifdef CONFIG_SECBOOT
248 get_secboot_base_from_dt();
249 #endif
250 /* remap iram */
251 //autodlader_remap();
252 /* main handler receive and jump */
253 autodloader_mainhandler();
254
255 /*reach here means error happened*/
256 return;
257 }
72 void normal_mode(void)
73 {
74 #ifndef CONFIG_ZEBU
75 vibrator_hw_init();
76
77 set_vibrator(1);
78 vlx_nand_boot(BOOT_PART, BACKLIGHT_ON, LCD_ON);
79 #else
80 vlx_nand_boot_zebu(BOOT_PART, BACKLIGHT_ON, LCD_ON);
81 #endif
82 return;
83 }
uboot 完成初始化和校验，加载img，启动kernel
void vlx_nand_boot(char *kernel_pname, int backlight_set, int lcd_enable)
1827 {
1828 boot_img_hdr *hdr = (void *)raw_header;
1829 char *mode_ptr = NULL;
1830 uchar *partition = NULL;
1831 int i = 0;
1832 int j = 0;
1833 int ret = 0;
1834 uchar *dt_adr = DT_ADR;
1835 uint32_t lcd_init_time;
1836 uint32_t backlight_on_time;
1837 uint32_t uboot_consume_time;
1838
1839 #ifdef CONFIG_SOC_IWHALE2
1840 aon_lpc_config();
1841 #endif
1842 wakeup_source_enable();
1843 ap_clk_doze_enable();
1844
1845 #ifdef CONFIG_SPLASH_SCREEN
1846 lcd_init_time = SCI_GetTickCount();
1847 printf("lcd start init time:%dms\n", lcd_init_time);
1848 if(lcd_enable) {
1849 extern void lcd_enable(void);
1850 debug("[LCD] Drawing the logo...\n");
1851 drv_lcd_init();
1852 lcd_splash(LOGO_PART);
1853 lcd_enable();
1854 }
1855 #ifdef CONFIG_SPRD_SOC_SP9853I
1856 else {
1857 /*if no lcd in cali mode, turn off the cam_eb bit*/
1858 char *boot_mode_type_str;
1859
1860 boot_mode_type_str = getenv("bootmode");
1861 if(!strncmp(boot_mode_type_str, "cali", 4)) {
1862 sci_glb_clr(REG_AON_APB_APB_EB1, BIT_AON_APB_AON_CAM_EB);
1863 }
1864
1865 }
1866 #endif
1867 set_backlight(backlight_set);
1868 backlight_on_time = SCI_GetTickCount();
1869 lcd_init_time= backlight_on_time - lcd_init_time;
1870 uboot_consume_time = backlight_on_time - uboot_start_time;
1871 printf("uboot consume time:%dms, lcd init consume:%dms, backlight on time:%dms \n", \
1872 uboot_consume_time, lcd_init_time, backlight_on_time);
1873
1874 #endif
1875 set_vibrator(0);
1876
1877 #if 0
1878 #ifdef CONFIG_SECBOOT
1879 //init fastboot lock data
1880 init_fblockflag();
1881 #endif
1882 #endif
1883
1884 #if (defined CONFIG_X86) && (defined CONFIG_MOBILEVISOR) && (defined CONFIG_SOC_IWHALE2) && (defined CONFIG_SECBOOT)
1885 tos_status_check();
1886 #endif
1887
1888 #if (defined CONFIG_X86) && (defined CONFIG_MOBILEVISOR) && (defined CONFIG_SPRD_SOC_SP9853I)
1889 tos_start_notify();
1890 #endif
1891
1892 #if defined(CONFIG_SECURE_BOOT)||defined(CONFIG_SECBOOT)
1893 if (0 == memcmp(kernel_pname, RECOVERY_PART, strlen(RECOVERY_PART))) {
1894 #ifdef CONFIG_ANDROID_AB
1895 partition = "boot";
1896 #else
1897 partition = "recovery";
1898 #endif
1899 } else {
1900 partition = "boot";
1901 }
1902 #if defined (CONFIG_SECURE_BOOT)
1903 secure_verify_partition(dev, partition, KERNEL_ADR);
1904 #endif
1905
1906 #if defined (CONFIG_SECBOOT)
1907 /***secboot only 3 steps***/
1908 /***secboot 1st step***/
1909 secboot_init(partition);
1910
1911 /***secboot 2nd step***/
1912 /*set v-boot binding data eg:lock status*/
1913 loader_binding_data_set();
1914 pass_pubkey_to_tos();
1915
1916 vboot_secure_process_flow(partition);
1917 #endif
1918 #endif
1919
1920 /*load required image which config in table */
1921 i = 0;
1922 #ifdef CONFIG_ARM7_RAM_ACTIVE
1923 #ifdef CONFIG_SOC_IWHALE2
1924 /*Just for iwhale2 bringup --from Sheng.Zhu advice*/
1925 ag_tg_ldsp_hold();
1926 #endif
1927 #ifndef CONFIG_SPRD_SP_UART
1928 pmic_arm7_RAM_active();
1929 #endif
1930 #endif
1931
1932
1933 while (s_boot_image_table[i]) {
1934 j = 0;
1935 while (s_boot_image_table[i][j].partition) {
1936 _boot_load_required_image(s_boot_image_table[i][j]);
1937 j++;
1938 }
1939 i++;
1940 }
1941
1942 extern unsigned int g_charger_mode;
1943 #if defined(CONFIG_KERNEL_BOOT_CP)
1944 if(g_charger_mode) {
1945 boot_image_required_t pm_image = {"pm_sys", NULL, DFS_SIZE, DFS_ADDR};
1946 _boot_load_required_image(pm_image);
1947 }
1948 #endif
1949
1950 #if !defined(CONFIG_KERNEL_BOOT_CP) && defined(CONFIG_MEM_LAYOUT_DECOUPLING)
1951 extern boot_image_required_t *get_cp_load_table(void);
1952 do {
1953 boot_image_required_t *cp_load_table = NULL;
1954 cp_load_table = get_cp_load_table();
1955 printf("cp_load_table = 0x%p\n", cp_load_table);
1956 if (NULL != cp_load_table) {
1957 for(i = 0; cp_load_table[i].size > 0; i++) {
1958 _boot_load_required_image(cp_load_table[i]);
1959 }
1960 }
1961 } while(0);
1962 #endif
1963
1964 #if defined (CONFIG_SECBOOT)
1965 secboot_secure_process_flow(partition,0,0,(char *)gd->verify_base);
1966 //things to do refer to verify ret
1967 take_action_with_vbootret();
1968
1969 if(set_root_of_trust(root_of_trust_str, ROOT_OF_TRUST_MAXSIZE)) {
1970 printf("set_root_of_trust failed.\n");
1971 } else {
1972 printf("set_root_of_trust succeeded.\n");
1973 }
1974 #endif
1975
1976 #ifdef OTA_BACKUP_MISC_RECOVERY
1977 ret = memcmp(kernel_pname, RECOVERY_PART, strlen(RECOVERY_PART));
1978 if ((ret != 0) || (boot_load_recovery_in_sd(hdr) != 0))
1979 if (!_boot_load_kernel_ramdisk_image(kernel_pname, hdr, &dt_adr))
1980 ret = -1;
1981 #else
1982 /*loader kernel and ramdisk*/
1983 if (!_boot_load_kernel_ramdisk_image(kernel_pname, hdr, &dt_adr))
1984 ret = -1;
1985 #endif
1986
1987 if (-1 == ret)
1988 return;
1989
1990 #ifdef PROJECT_SEC_CM4
1991 if(g_charger_mode)
1992 {
1993 boot_image_required_t pm_image = {"pm_sys", NULL, DFS_SIZE, DFS_ADDR};
1994
1995 /* load sp ddr boot */
1996 #ifdef CONFIG_SP_DDR_BOOT
1997 load_sp_boot_code();
1998 #endif
1999
2000 /***secboot 2nd step***/
2001 vboot_secure_process_flow_cm4(pm_image.partition);
2002 }
2003 #endif
2004
2005 #if defined (CONFIG_SECBOOT)
2006 /***secboot 3rd step***/
2007 secboot_terminal();
2008 #endif
2009
2010 // add for SOTER start
2011 #if defined (CONFIG_CHIP_UID)
2012 pass_chip_uid_to_tos();
2013 #endif
2014 // add for SOTER end
2015
2016 //#if defined(TOS_TRUSTY) && defined(CONFIG_EMMC_BOOT) && defined(CONFIG_SPRD_RPMB)
2017
2018 #if defined(CONFIG_SPRD_RPMB)
2019 if(gd->boot_device == BOOT_DEVICE_EMMC) {
2020 uboot_set_rpmb_size();
2021 uboot_is_wr_rpmb_key();
2022 uboot_check_rpmb_key();
2023 }
2024 #endif
2025
2026 #ifdef CONFIG_TEE_FIREWALL
2027 //fdt_reserved_mem_multimedia_parse(dt_adr);
2028 #endif
2029
2030 #if (defined CONFIG_X86) && (defined CONFIG_MOBILEVISOR) && (defined CONFIG_SPRD_SOC_SP9853I)
2031 tos_end_notify();
2032 #endif
2033
2034 #ifdef CONFIG_SPRD_HW_I2C
2035 i2c_dvfs_hwchn_init();
2036 #endif
2037
2038 vlx_entry(dt_adr);
2039 }
2040
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
