mac vmware网络

修改虚拟机 vmnet1 网段

sudo vim /Library/Preferences/VMware\ Fusion/networking

VERSION=1,0
answer VNET_1_DHCP yes
answer VNET_1_DHCP_CFG_HASH 57F6D7F5E833F5C6A272828D30549059D0D1A73E
answer VNET_1_HOSTONLY_NETMASK 255.255.255.0
answer VNET_1_HOSTONLY_SUBNET 192.168.2.0
answer VNET_1_VIRTUAL_ADAPTER yes
answer VNET_8_DHCP yes
answer VNET_8_DHCP_CFG_HASH F3C322AC94B8E2A787CF5BDADF2C711563F62E0A
answer VNET_8_HOSTONLY_NETMASK 255.255.255.0
answer VNET_8_HOSTONLY_SUBNET 192.168.1.0
answer VNET_8_NAT yes
answer VNET_8_VIRTUAL_ADAPTER yes

查看网段

/Library/Preferences/VMware\ Fusion/vmnet1/dhcpd.conf

# Configuration file for ISC 2.0 vmnet-dhcpd operating on vmnet1.
#
# This file was automatically generated by the VMware configuration program.
# See Instructions below if you want to modify it.
#
# We set domain-name-servers to make some DHCP clients happy
# (dhclient as configured in SuSE, TurboLinux, etc.).
# We also supply a domain name to make pump (Red Hat 6.x) happy.
#

###### VMNET DHCP Configuration. Start of "DO NOT MODIFY SECTION" #####
# Modification Instructions: This section of the configuration file contains
# information generated by the configuration program. Do not modify this
# section.
# You are free to modify everything else. Also, this section must start
# on a new line
# This file will get backed up with a different name in the same directory
# if this section is edited and you try to configure DHCP again.

# Written at: 04/23/2021 09:27:58
allow unknown-clients;
default-lease-time 1800;                # default is 30 minutes
max-lease-time 7200;                    # default is 2 hours

subnet 192.168.2.0 netmask 255.255.255.0 {
        range 192.168.2.128 192.168.2.254;
        option broadcast-address 192.168.2.255;
        option domain-name-servers 192.168.2.1;
        option domain-name localdomain;
        default-lease-time 1800;                # default is 30 minutes
        max-lease-time 7200;                    # default is 2 hours
}
host vmnet1 {
        hardware ethernet 00:50:56:C0:00:01;
        fixed-address 192.168.2.1;
        option domain-name-servers 0.0.0.0;
        option domain-name "";
}
####### VMNET DHCP Configuration. End of "DO NOT MODIFY SECTION" #######

/Library/Preferences/VMware\ Fusion/vmnet8/dhcpd.conf

# Configuration file for ISC 2.0 vmnet-dhcpd operating on vmnet8.
#
# This file was automatically generated by the VMware configuration program.
# See Instructions below if you want to modify it.
#
# We set domain-name-servers to make some DHCP clients happy
# (dhclient as configured in SuSE, TurboLinux, etc.).
# We also supply a domain name to make pump (Red Hat 6.x) happy.
#

###### VMNET DHCP Configuration. Start of "DO NOT MODIFY SECTION" #####
# Modification Instructions: This section of the configuration file contains
# information generated by the configuration program. Do not modify this
# section.
# You are free to modify everything else. Also, this section must start
# on a new line
# This file will get backed up with a different name in the same directory
# if this section is edited and you try to configure DHCP again.

# Written at: 04/23/2021 09:27:58
allow unknown-clients;
default-lease-time 1800;                # default is 30 minutes
max-lease-time 7200;                    # default is 2 hours

subnet 192.168.1.0 netmask 255.255.255.0 {
        range 192.168.1.128 192.168.1.254;
        option broadcast-address 192.168.1.255;
        option domain-name-servers 192.168.1.2;
        option domain-name localdomain;
        default-lease-time 1800;                # default is 30 minutes
        max-lease-time 7200;                    # default is 2 hours
        option netbios-name-servers 192.168.1.2;
        option routers 192.168.1.2;
}
host vmnet8 {
        hardware ethernet 00:50:56:C0:00:08;
        fixed-address 192.168.1.1;
        option domain-name-servers 0.0.0.0;
        option domain-name "";
        option routers 0.0.0.0;
}
####### VMNET DHCP Configuration. End of "DO NOT MODIFY SECTION" #######

/Library/Preferences/VMware Fusion/vmnet8/nat.conf

# VMware NAT configuration file
# Manual editing of this file is not recommended. Using UI is preferred.

[host]

# Use MacOS network virtualization API
useMacosVmnetVirtApi = 1

# NAT gateway address
ip = 192.168.1.1
netmask = 255.255.255.0

# Last DHCP address
lastDhcpAddress = 192.168.1.127

# VMnet device if not specified on command line
device = vmnet8

# Allow PORT/EPRT FTP commands (they need incoming TCP stream ...)
activeFTP = 1

# Allows the source to have any OUI.  Turn this on if you change the OUI
# in the MAC address of your virtual machines.
allowAnyOUI = 1

# Controls if (TCP) connections should be reset when the adapter they are
# bound to goes down
resetConnectionOnLinkDown = 1

# Controls if (TCP) connection should be reset when guest packet's destination
# is NAT's IP address
resetConnectionOnDestLocalHost = 1

# Controls if enable nat ipv6
natIp6Enable = 0

# Controls if enable nat ipv6
natIp6Prefix = fd15:4ba5:5a2b:1008::/64

[tcp]

# Value of timeout in TCP TIME_WAIT state, in seconds
timeWaitTimeout = 30

[udp]

# Timeout in seconds. Dynamically-created UDP mappings will purged if
# idle for this duration of time 0 = no timeout, default = 60; real
# value might be up to 100% longer
timeout = 60

[netbios]
# Timeout for NBNS queries.
nbnsTimeout = 2

# Number of retries for each NBNS query.
nbnsRetries = 3

# Timeout for NBDS queries.
nbdsTimeout = 3

[incomingtcp]

# Use these with care - anyone can enter into your VM through these...
# The format and example are as follows:
#<external port number> = <VM's IP address>:<VM's port number>
#8080 = 172.16.3.128:80

[incomingudp]

# UDP port forwarding example
#6000 = 172.16.3.0:6001