Android 自定义camera-----当调用摄像头时,压缩图片到指定大小范围
项目中的需求
解决流程总结:
一、在调用摄像头时设置
//JPEG图像设置质量,这个基本可以解决大多少手机
Camera.Parameters.setJpegQuality(40);
二、但是,有些手机还是不能使用第一种方法,则在上传图片时再次进行压缩处理
基本流程:
判断当前文件是否大于要压缩的大小(示例120), //判断文件大小是否超过120K
if ((files.getFile().length() / 1024) > 120)
如果小于,直接上传图片
否则开始压缩:
1、将文件转换为byte数组
2、使用此方法进行压缩
public static byte[] compressBitmap(byte[] data, float size) { /* 取得相片 */
Bitmap bitmap = BitmapFactory.decodeByteArray(data, 0,data.length);
//Bitmap bitmap = BitmapFactory.decodeFile(imageFile);
if (bitmap == null || getSizeOfBitmap(bitmap) <= size) {
return null;// 如果图片本身的大小已经小于指定大小,就没必要进行压缩
}
ByteArrayOutputStream baos = new ByteArrayOutputStream();
bitmap.compress(Bitmap.CompressFormat.JPEG, 100, baos);// 如果签名是png的话,则不管quality是多少,都不会进行质量的压缩
int quality = 100;
while ((baos.toByteArray().length / 1024f) > size) {
quality -= 5;// 每次都减少5(如果这里-=10,有时候循环次数会提前结束)
LogPrint.Print("console","------quality--------" + quality);
baos.reset();// 重置baos即清空baos
if (quality <= 0) {
break;
}
bitmap.compress(Bitmap.CompressFormat.JPEG, quality, baos);
LogPrint.Print("console","------质量--------" + baos.toByteArray().length / 1024f);
}
byte[] byteData = baos.toByteArray();
return byteData;
}
private static long getSizeOfBitmap(Bitmap bitmap){
ByteArrayOutputStream baos = new ByteArrayOutputStream();
bitmap.compress(Bitmap.CompressFormat.JPEG, 100, baos);//这里100的话表示不压缩质量
long length=baos.toByteArray().length/1024;//读出图片的kb大小
return length;
}
3、再将byte数组转换为文件file
4、开始上传
以下方法进行图片压缩更有效
/**
* 根据图片路径进行压缩图片
* @param srcPath
* @return
*/
public static Bitmap getimage(String srcPath,int size) {
BitmapFactory.Options newOpts = new BitmapFactory.Options();
//开始读入图片,此时把options.inJustDecodeBounds 设回true了,表示只返回宽高
newOpts.inJustDecodeBounds = true;
Bitmap bitmap = BitmapFactory.decodeFile(srcPath,newOpts);//此时返回bm为空
newOpts.inJustDecodeBounds = false;
//当前图片宽高
float w = newOpts.outWidth;
float h = newOpts.outHeight;
//现在主流手机比较多是800*480分辨率,所以高和宽我们设置为
float hh = 800f;//这里设置高度为800f
float ww = 480f;//这里设置宽度为480f
//缩放比。由于是固定比例缩放,只用高或者宽其中一个数据进行计算即可
int be = 1;//be=1表示不缩放
if (w > h && w > ww) {//如果宽度大的话根据宽度固定大小缩放
LogPrint.Print("fileupload","------原始缩放比例 --------" + (newOpts.outWidth / ww));
be = (int)(newOpts.outWidth / ww);
//有时会出现be=3.2或5.2现象,如果不做处理压缩还会失败
if ((newOpts.outWidth / ww) > be) {
be += 1;
}
//be = Math.round((float) newOpts.outWidth / (float) ww);
} else if (w < h && h > hh) {//如果高度高的话根据宽度固定大小缩放
LogPrint.Print("fileupload","------原始缩放比例 --------" + (newOpts.outHeight / hh));
be = (int)(newOpts.outHeight / hh);
if ((newOpts.outHeight / hh) > be) {
be += 1;
}
//be = Math.round((float) newOpts.outHeight / (float) hh);
}
if (be <= 0){
be = 1;
}
newOpts.inSampleSize = be;//设置缩放比例
LogPrint.Print("fileupload","------设置缩放比例 --------" + newOpts.inSampleSize);
//重新读入图片,注意此时已经把options.inJustDecodeBounds 设回false了
bitmap = BitmapFactory.decodeFile(srcPath, newOpts);
return compressImage(bitmap,size);//压缩好比例大小后再进行质量压缩
}
/**
* 压缩图片
* @param image
* @param size
* @return
*/
private static Bitmap compressImage(Bitmap image,int size) {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
image.compress(Bitmap.CompressFormat.JPEG, 100, baos);//质量压缩方法,这里100表示不压缩,把压缩后的数据存放到baos中
int options = 100;
while ((baos.toByteArray().length / 1024) >= size) { //循环判断如果压缩后图片是否大于等于size,大于等于继续压缩
LogPrint.Print("fileupload","------ByteArray--------" + baos.toByteArray().length / 1024);
baos.reset();//重置baos即清空baos
options -= 5;//每次都减少5
image.compress(Bitmap.CompressFormat.JPEG, options, baos);//这里压缩options%,把压缩后的数据存放到baos中
LogPrint.Print("fileupload","------压缩质量--------" + options);
}
ByteArrayInputStream isBm = new ByteArrayInputStream(baos.toByteArray());//把压缩后的数据baos存放到ByteArrayInputStream中
Bitmap bitmap = BitmapFactory.decodeStream(isBm, null, null);//把ByteArrayInputStream数据生成图片
return bitmap;
}
/**
* Bitmap转byte数组
* @param bitmap
* @return
*/
public static byte[] compressBitmap(Bitmap bitmap) {
if (bitmap == null ) {
return null;//
}
/* 取得相片 */
Bitmap tempBitmap = bitmap;
ByteArrayOutputStream baos = new ByteArrayOutputStream();
tempBitmap.compress(Bitmap.CompressFormat.JPEG, 70, baos);// 如果签名是png的话,则不管quality是多少,都不会进行质量的压缩
byte[] byteData = baos.toByteArray();
return byteData;
}