本文转自(http://intr.lithium.com/t5/Device-Management/How-to-enable-scanner-on-CN3-device/td-p/1363)
The SSPB is installed to/from \Flash File Store\SSPB on the device.
According to the InternetExplorer Info, SSPB 5.30.13.0265 is installed on the device. Another point to check if SPPB is in place is the applet symbol IntermecSettings within Start-Settings-System. Using Intermec Settings you can also check the installed versions (Device Settings-System Component Versions).
It looks like your 'faulty' CN3needs a clean boot: remove battery; press reset button; insert battery; press-and-hold the yellow I/O button; the clean boot dialog appears; press either of the blue buttons on the right side of the device.
Clean Boot will reset your device to factory default except any changes made to \FlashFileStore. First the OS image is resetted and then SSPB is installed (orange install window bars appear).
In some cases, depending on what has been changed to \FlashFileStore, you may need to reflash the unit:
- Download WM5 OS 3.25.15.0141
- Download SSPB 5.50.23.0362
Install both packages on your windows pc. Prepare an empty mini SD memory card: - Copy all installed files from "C:\Program Files\Intermec\SSPkgCN3_WM_GPRS_WWE_3.25.15.0141\O
S" to SD card - Insert SD card into CN3 (remove two screws inside battery place)
- Press reset button in battery place
- Insert battery and let the device reflash itself
- After flashing is complete, remove SD card and delete all files on the SD card
- Copy _SSTransferAgent.xml and the directory SSPB from C:\Program Files\Intermec\CN3_WM5_5.50.23.0362_SSPBinstall onto the empty SD card. You should have one file in root dir and one dir called SSPB on SD card
- Insert SD card and press reset button
- Insert battery and let the SSPB install itself (does one reboot at end of copy)
Directory struct of SSPB on PC:
C:\PROGRAM FILES\INTERMEC\CN3_WM5_5.50.23.0362_SSPBINSTALL | _SSTransferAgent.xml | \---SSPB CN3_WM5_SSPB_ID.CAB IBI.CAB idl.CAB iGPSApplet.cab InstallSelectCN3WM.CAB IntermecValueAdd.js IntermecValueAdd.txt Intermec_DHCP_WM5.cab itcauto.CAB itcivacn3wm.cab OtherNeededStuff.WM2005_ARMVI.CAB PowerPro.CAB PrinterSupport.CAB SetupASTStart.itc supprcmagneto.cab wlenablercn3.arm.cab _SSTransferAgent.xml
Directory of OS Image:
C:\Program Files\Intermec\SSPkgCN3_WM_GPRS_WWE_3.25.15.0141 | SD_Install_Readme.txt | \---OS CN3.BOOTSCREEN.bmp cn3.burner.dat CN3.crcdata.dat CN3.Default.eep CN3.EBoot.nb0 cn3.EBoot.nb0.sig CN3.firmware.gps CN3.IPL.G3.nb0 CN3.IPL.G4.nb0 CN3.IPL.H3.nb0 cn3.OS.gprs.WWE.bin CN3.PIC.hex cn3.starter.dat _autoflash.lst
Directory of SD card for OS image and SSPB install at once:
\ | CN3.BOOTSCREEN.bmp | cn3.burner.dat | CN3.crcdata.dat | CN3.Default.eep | CN3.EBoot.nb0 | cn3.EBoot.nb0.sig | CN3.firmware.gps | CN3.IPL.G3.nb0 | CN3.IPL.G4.nb0 | CN3.IPL.H3.nb0 | cn3.OS.gprs.WWE.bin | CN3.PIC.hex | cn3.starter.dat | autoflash.lst | _SSTransferAgent.xml | \---SSPB CN3_WM5_SSPB_ID.CAB IBI.CAB idl.CAB iGPSApplet.cab InstallSelectCN3WM.CAB IntermecValueAdd.js IntermecValueAdd.txt Intermec_DHCP_WM5.cab itcauto.CAB itcivacn3wm.cab OtherNeededStuff.WM2005_ARMVI.CAB PowerPro.CAB PrinterSupport.CAB SetupASTStart.itc supprcmagneto.cab wlenablercn3.arm.cab _SSTransferAgent.xml
Hopefually you scanner will work again after doing this reflashing. If not, you have to return it to service.