the data that is in the table is from excel, so the data to be read can changed?

 Merci de votre ronse mais si je maitrise le montage ectronique ;mon proble se situe au niveau de la programmation labview
Je veux simplement en utilisant un interrupteur et une sortie sur labview dlancher un relais pour alimenter un circuit ectrique quelconque ( RLC par exemple) faire l'acquisition de tensions (ca je sais faire) enregistrer les data dans un fichier texte que les es pourront ensuite traiter
Bien cordialement

 

12: Using vbscript to call labview
13: Using Labview 6.1, I have problem when I try to build my application.
14: get process state in order to control loop
15: DAQ integrated with 7344-Flexmotion over RTSI
16: Question about global data in LV express
17: What is a fast way to drive a HP53132A counter to do real time, "time interval" measurements?
18: dos

I am looking for a power supply with a programmable voltage rise time.
I would like to be able to ramp the output voltage of a power supply
from 0 to 5 volts in 1mS or less to 20mS. The load will be less than
five amps.

Using more than one data format for writing data to spreadsheet

 

why it display zero when I use NI labview sample code " Multiple OPC
Items Monitor.vi" to communicate with Dynisco UPR700 using RS485 with
Modbus procotol?

When I try to communicate with UPR700, the VI shows zero. I am sure
that the connection and serial setting are right because I used a demo
software from other company to verify them. Could you give me any clue
or any resources? Thank!

the data that is in the table is from excel, so the data to be read can changed?

 

I have some trouble With the graph XY, if I display a curve and try to
zoom on it, it may be corrupted, or may disappeared.

In fact this happens on some computers. the graph XY causes some
trouble when zooming. Sometimes, when I run my main program and open
the window with the graph, it has change the displayed it overflows to
the edge of the windows. Or somtimes it works but if I zoom the curves
disappeared, or is corrupted.
I have this for instance on a computer with win 98 and a ATI graphic
board. So I try to update all drivers but noting has changed. I try
to decrease the hardware acceleration, and it seems to happen less
oftenly.
Does anybody have seen that kind of trouble ?

 

How to link Zemax externally to Labview for a specific operand caclulation

 

after acquiring a signal through the DAQ i am writing it in a spreadsheet. but for further post processing of the data the date and the time column are unneccessary. is there some way to format the file in labview so that those columns are removed. the DAQmx read  gives as output a 1 d array. so i could not find a way to select only the Y column

 

How to get the sum of every measurement and further to get the average value of the whole measurement?