ethtool 命令输出的注意点

最新推荐文章于 2024-07-31 20:30:50 发布

msdnchina

最新推荐文章于 2024-07-31 20:30:50 发布

阅读量2k

点赞数

分类专栏： OL7 文章标签： ethtool deplx full

本文链接：https://blog.csdn.net/msdnchina/article/details/70339689

版权

OL7 专栏收录该内容

93 篇文章 1 订阅

订阅专栏

[root@rac2 ~]# ethtool enp3s0f1  
Settings for enp3s0f1:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Speed: 1000Mb/s------->>>务必是1000Mb/s  
	Duplex: Full------->>>务必是FULL,若是半双工,意味着任一时刻,该网卡要么只能收,要么只能发. 
	Port: Twisted Pair------->>>双绞线,若是万兆,此处会显示FIBRE
	PHYAD: 1
	Transceiver: internal
	Auto-negotiation: on
	MDI-X: off (auto)
	Supports Wake-on: d
	Wake-on: d
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: yes------->>>务必是yes
[root@rac2 ~]#

参考文章:
RAC: Frequently Asked Questions (RAC FAQ) (Doc ID 220970.1)