VS Code 配置 go-tools

说明: 
本文参考 网友写的一份博客, 自己尝试安装, 发现不必他写的那么麻烦, 
因此做个记录, 方便其他人参考:
不过我只在我的本地测试可以: 如果你的电脑无法使用, 
请留言, 我会在文章开头添加说明, 避免浪费大家时间!!!!
生命可贵, 请勿浪费!
源文连接:
https://blog.csdn.net/WindSunLike/article/details/103986319?depth_1-utm_source=distribute.pc_relevant.none-task-blog-OPENSEARCH-1&utm_source=distribute.pc_relevant.none-task-blog-OPENSEARCH-1


1.下载go安装: 参考菜鸟教程方法, 写的很清楚 :
https://www.runoob.com/go/go-environment.html

2. 进入环境变量中配置GOPAtH 目录:  
 例如 :   d:\GOPATH

3. 在GOPATH 三个目录:  bin   ,  src  , pkg , 如下:
 d:\GOPATH\bin

 d:\GOPATH\src

 d:\GOPATH\pkb



4. 然后在src 目录下 创建如下路径 ;  
 d:\GOPATH\src\golang.org\x

5. 进入路径:  d:\GOPATH\src\golang.org\x  使用git clone  下载 tools 工具

 #注意 : 该url 是可用的, 如果出现超时, 就多试几次... 
 $ git  clone  http://github.com/golang/tools   


下面是我的操作记录: 建议使用git Bash 运行
D:\GOPATH\src\golang.org\x>git clone http://github.com/golang/tools
Cloning into 'tools'...
warning: redirecting to https://github.com/golang/tools/
remote: Enumerating objects: 124, done.
remote: Counting objects: 100% (124/124), done.
remote: Compressing objects: 100% (110/110), done.
remote: Total 43031 (delta 28), reused 45 (delta 12), pack-reused 42907
Receiving objects: 100% (43031/43031), 19.28 MiB | 35.00 KiB/s, done.
Resolving deltas: 100% (30544/30544), done.
Updating files: 100% (1509/1509), done.

下载后结果如下:
drwxr-xr-x 1 Administrator 197121 0 四月    9 12:57 tools/


6. tools下载好后，进入%GOPATH%\src\golang.org\x\tools\cmd\gorename目录，
按shift+右键选择在此打开命令窗口
  D:\GOPATH\src\golang.org\x\tools\cmd\gorename>

7. 安装gorename 组件。 在命令窗口输入 go  install 命令

  D:\GOPATH\src\golang.org\x\tools\cmd\gorename>go install

8. 安装go-symbols 组件
 >go get -u -v github.com/newhook/go-symbols
输出如下, 表明下载成功: 
  go: downloading github.com/newhook/go-symbols v0.0.0-20151212134530b75dfefa0d23
  go: github.com/newhook/go-symbols upgrade => v0.0.0-20151212134530-b75dfefa0d23
github.com/newhook/go-symbols

此时查看 d:\GOPATH\bin 目录下文件: 
发现 生成了gorename.exe  和 go-symbols.exe 两个可执行文件

打开vs code  , 指定打开路径为 d:\GOPATH 

查找一个.go文件打开,例如 D:\GOPATH\src\golang.org\x\tools\cmd\benchcmp\benchcmp_test.go
此时vs code 会提示 安装go 插件:

选择 install all  : 
等待vs code 帮我们安装其他依赖的插件

之所以原来会报错, 可能是因为 
没有安装 github.com/newhook/go-symbols 这个插件, 
该插件安装后在pkg下,添加网络配置信息, 等待vs code 安装完成, 在此查看 GOPATH\bin
路径下, 发现, 组件的依赖可执行文件都自动生成;

运行如下:
go.toolsGopath setting is not set. Using GOPATH D:\GO_WORKAPACE
Installing 17 tools at D:\GO_WORKAPACE\bin in module mode.
  gocode
  gopkgs
  go-outline
  go-symbols
  guru
  gorename
  gotests
  gomodifytags
  impl
  fillstruct
  goplay
  godoctor
  dlv
  gocode-gomod
  godef
  goreturns
  golint

Installing github.com/mdempsky/gocode SUCCEEDED
Installing github.com/uudashr/gopkgs/v2/cmd/gopkgs SUCCEEDED
Installing github.com/ramya-rao-a/go-outline SUCCEEDED
Installing github.com/acroca/go-symbols SUCCEEDED
Installing golang.org/x/tools/cmd/guru SUCCEEDED
Installing golang.org/x/tools/cmd/gorename SUCCEEDED
Installing github.com/cweill/gotests/... SUCCEEDED
Installing github.com/fatih/gomodifytags SUCCEEDED
Installing github.com/josharian/impl SUCCEEDED
Installing github.com/davidrjenni/reftools/cmd/fillstruct SUCCEEDED
Installing github.com/haya14busa/goplay/cmd/goplay SUCCEEDED
Installing github.com/godoctor/godoctor SUCCEEDED
Installing github.com/go-delve/delve/cmd/dlv SUCCEEDED
Installing github.com/stamblerre/gocode SUCCEEDED
Installing github.com/rogpeppe/godef SUCCEEDED
Installing github.com/sqs/goreturns SUCCEEDED
Installing golang.org/x/lint/golint SUCCEEDED

All tools successfully installed. You are ready to Go :).


至此, go-tool 插件 安装 OK