跟我学VMM testbech (7)---实战 MP2991

Monitor / scoreboard, 在MP2991 project中我们把scoreboard的部分功能放到了Monitor里面。我们知道一般SysCfg和REGCfg只会randomize一次，因此我们将coverage group直接放入scoreboard中。这里由于没有sb，因此放入monitor中。 而在scoreboard（这里是monitor）的main的第一步就sample它。

 

class svidMON extends vmm_xactor; virtual svidIntf.md_mon mon_intf; // check some flag svidTrans trans; svidTrans_channel mon_chan; svidTrans trq_a[$]; svidTrans trq_b[$]; bit[7:0] final_vida; bit[7:0] final_vidb; svidSYSCfg sys_cfg; svidREGCfg reg_cfg; //ral ral_sys_svidRegSys ral_sys; vmm_rw::status_e stat; bit[7:0] rdata; //**************************************************************** // System level coverage group //**************************************************************** covergroup cov_sys_err_injection; covp_err_inject: coverpoint (sys_cfg.glbsw_inject_en); endgroup //**************************************************************** // register level coverage group //**************************************************************** covergroup cov_reg_input_current; covp_err_inject: coverpoint (reg_cfg.Input_Current) { bins covb_current[10]= {['h0:8'hff]}; } endgroup extern function new( virtual svidIntf svidintf, svidSYSCfg sys_cfg, svidREGCfg reg_cfg, ral_sys_svidRegSys ral_sys, svidTrans_channel mon_chan = null); extern virtual protected task main(); extern task line_queue(svidTrans trans); extern task auto_compare(bit[7:0] final_vid, int index); extern virtual task sample_coverage(); endclass //*************************************************** // functions and tasks //*************************************************** function svidMON::new( virtual svidIntf svidintf, svidSYSCfg sys_cfg, svidREGCfg reg_cfg, ral_sys_svidRegSys ral_sys, svidTrans_channel mon_chan = null); super.new("svidMON","class"); // naming the svidBFM this.mon_intf=svidintf; this.sys_cfg=sys_cfg; this.reg_cfg=reg_cfg; this.ral_sys=ral_sys; if(mon_chan==null) mon_chan = new("svidMON mon_chan", "class"); this.mon_chan=mon_chan; //coverage groups cov_sys_err_injection=new(); cov_reg_input_current =new(); endfunction task svidMON::main(); super.main(); //sample system level, register level coverage sample_coverage(); fork // get transaction from svidXactor and put them into queue while(1) begin wait_if_stopped_or_empty(mon_chan); mon_chan.peek(trans); `vmm_note(log,trans.psdisplay("Monitor Get")); // put the transaction into one of expected queue line_queue(trans); mon_chan.get(trans); $display(">>>Mon got transaction, data_id=%0d",trans.data_id); end // monitor dvida falling edge, and search queue a while(1) begin @(negedge mon_intf.moncb.dvida); repeat(1) @(mon_intf.moncb); final_vida=mon_intf.moncb.dac_vida; // searching queue and try to match the result with expected value auto_compare(final_vida,0); end // monitor dvidb falling edge, and search queue b while(1) begin @(negedge mon_intf.moncb.dvidb); repeat(1) @(mon_intf.moncb); final_vidb=mon_intf.moncb.dac_vidb; // searching queue and try to match the result with expected value auto_compare(final_vidb,1); end // give vr_seta and vr_setb while(1) begin repeat(1) @(mon_intf.moncb); mon_intf.moncb.vr_seta<=~mon_intf.moncb.dvida; mon_intf.moncb.vr_setb<=~mon_intf.moncb.dvidb; end join endtask task svidMON::line_queue(svidTrans trans); // setvid rail a // setvid rail b // setvid all call svidTrans cpy_trans_a; svidTrans cpy_trans_b; if(trans.command==svidTrans::SETVID_FAST|| trans.command==svidTrans::SETVID_SLOW|| trans.command==svidTrans::SETVID_DECAY) begin if(trans.address==4'b1111) begin $cast(cpy_trans_a,trans.copy()); ral_sys.svidReg0.VID_Offset.peek(stat,rdata); cpy_trans_a.payload=cpy_trans_a.payload+rdata; $cast(cpy_trans_b,trans.copy()); ral_sys.svidReg1.VID_Offset.peek(stat,rdata); cpy_trans_b.payload=cpy_trans_b.payload+rdata; trq_a.push_back(cpy_trans_a); trq_b.push_back(cpy_trans_b); end else if(trans.address==reg_cfg.VR_addressA) begin $cast(cpy_trans_a,trans.copy()); ral_sys.svidReg0.VID_Offset.peek(stat,rdata); cpy_trans_a.payload=cpy_trans_a.payload+rdata; trq_a.push_back(cpy_trans_a); end else if(trans.address==reg_cfg.VR_addressB) begin $cast(cpy_trans_b,trans.copy()); ral_sys.svidReg1.VID_Offset.peek(stat,rdata); cpy_trans_b.payload=cpy_trans_b.payload+rdata; trq_b.push_back(cpy_trans_b); end else begin `vmm_fatal(log,"ADDRESS IS NOT in RAILA or RAILB"); end end // get reg endtask task svidMON::auto_compare(bit[7:0] final_vid,int index); svidTrans popa; svidTrans popb; bit found_a; bit found_b; if(index==0) begin `vmm_note(log,$psprintf("VIDA trq_a.size=%0d",trq_a.size())); while(trq_a.size>0) begin popa=trq_a.pop_front(); `vmm_note(log,$psprintf("VIDA expect=%0h act=%0h",popa.payload,final_vid)); if((final_vid<=popa.payload+sys_cfg.max_vid_jitter)&& (int'(final_vid)>=int'(popa.payload)-int'(sys_cfg.max_vid_jitter))) begin `vmm_note(log,$psprintf("VIDA=%0d COMPARE OK",popa.data_id)); found_a=1; break; end end if(found_a==0) begin `vmm_fatal(log,$psprintf("VIDA COMPARE FAIL wz final_vid=%0h",final_vid)); end end else begin `vmm_note(log,$psprintf("VIDB trq_b.size=%0d",trq_b.size())); while(trq_b.size>0) begin popb=trq_b.pop_front(); `vmm_note(log,$psprintf("VIDB expect=%0h act=%0h",popb.payload,final_vid)); if((final_vid<=popb.payload+sys_cfg.max_vid_jitter)&& (int'(final_vid)>=int'(popb.payload)-int'(sys_cfg.max_vid_jitter))) begin `vmm_note(log,$psprintf("VIDB=%0d COMPARE OK",popb.data_id)); found_b=1; break; end end if(found_b==0) begin `vmm_fatal(log,$psprintf("VIDB COMPABRE FAIL wz final_vid=%0h",final_vid)); end end endtask //**************************************************************** // sample_coverage() //**************************************************************** task svidMON::sample_coverage(); cov_sys_err_injection.sample(); cov_reg_input_current.sample(); endtask