网上下载CST2019,安装软件直接百度。
安装完成CST2019,准备仿真点小环天线,没想到第一步就出错了
点击Modeling-Curves-Circle,设置radius为1;
在working plane画circle,提示Dimensions are too large for the 3D Modele
右下角提示错误原因,点击more
按照help提示更改units,还是没有用;
更改radius发现还是出错,一直减小,发现直接提示
Dimensions are too small for the 3D Modele
根据pads使用经验应该是栅格没有设置好
更改栅格后,还是设置不过去,软件好卡;
没有办法,关闭软件重启后就打开发现已经设置为想要的参数了