Working on Checkpoint Cluster XL Load Sharing configuration, and found one blog post from Technopath LLC regarding Cisco switch configuration. It should be helpful for my next step.
The topology like this:
- Configure the following command on the internal router (usually it is layer 3 switch and 0100.5e16.0de2 is Internal Checkpoint VIP Multicast Mac Address):
- arp 192.168.20.2 0100.5e16.0de2 arpa
- mac address-table static 0100.5e16.0de2 vlan 10 interface gi1/0/2 gi1/0/3 gi1/0/4
- no ip igmp snooping vlan 10
- arp 192.168.15.2 0100.5e16.0de3 arpa
- mac address-table static 0100.5e16.0de3 vlan 20 interface gi1/0/5 gi1/0/6 gi1/0/7
- no ip igmp snooping vlan 20