分析配置过程:
Makefile:
make 100ask24x0_config
MKCONFIG := $(SRCTREE)/mkconfig
100ask24x0_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t 100ask24x0 NULL s3c24x0
//mkconfig 100ask24x0 arm arm920t 100ask24x0 NULL s3c24x0
mkconfig:
mkconfig 100ask24x0 arm arm920t 100ask24x0 NULL s3c24x0:
#!/bin/sh -e
# Script to create header files and links to configure //创建头文件和相关链接去配置
# U-Boot for a specific board. //为某个单板
#
# Parameters: Target Architecture CPU Board [VENDOR] [SOC] //参数:目标,架构,cpu,单板,vendor,型号
#
# (C) 2002-2006 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
#
APPEND=no # Default: Create new config file
BOARD_NAME="" # Name to print in make output
//mkconfig 100ask24x0 arm arm920t 100ask24x0 NULL s3c24x0
// $0 $1 $2 $3 $4 $5 $6
while [ $# -gt 0 ] ; do //参数个数大于0
case "$1" in //参数1无匹配不执行
--) shift ; break ;;
-a) shift ; APPEND=yes ;;
-n) shift ; BOARD_NAME="${1%%_config}" ; shift ;;
*) break ;;
esac
done
[ "${BOARD_NAME}" ] || BOARD_NAME="$1" //没有定义BOARD_NAME ,则让 BOARD_NAME=100ask24x0
[ $# -lt 4 ] && exit 1 // 参数个数大于4,参数为5
[ $# -gt 6 ] && exit 1 // 参数个数小于6
echo "Configuring for ${BOARD_NAME} board..." //打印这句话
#
# Create link to architecture specific headers
#
if [ "$SRCTREE" != "$OBJTREE" ] ; then //SRCTREE和OBJTREE相等
mkdir -p ${OBJTREE}/include
mkdir -p ${OBJTREE}/include2
cd ${OBJTREE}/include2
rm -f asm
ln -s ${SRCTREE}/include/asm-$2 asm
LNPREFIX="../../include2/asm/"
cd ../include
rm -rf asm-$2
rm -f asm
mkdir asm-$2
ln -s asm-$2 asm
else
/* 在include目录下删除asm ,创建一个新的asm 链接指向 asm-arm*/
cd ./include
rm -f asm
ln -s asm-$2 asm
fi
rm -f asm-$2/arch //删除asm-arm/arch
if [ -z "$6" -o "$6" = "NULL" ] ; then //假如参数6为0或为空
ln -s ${LNPREFIX}arch-$3 asm-$2/arch
else
ln -s ${LNPREFIX}arch-$6 asm-$2/arch // 创建一个asm-arm/arch 链接 指向 arch-s3c24x0
fi
if [ "$2" = "arm" ] ; then
rm -f asm-$2/proc // 删除asm-arm/proc
ln -s ${LNPREFIX}proc-armv asm-$2/proc //创建一个asm-arm/proc 链接 指向 proc-armv
fi
#
# Create include file for Make
#
echo "ARCH = $2" > config.mk //创建config.mk,并输入ARCH = arm
echo "CPU = $3" >> config.mk //追加CPU = arm920t写入 config.mk
echo "BOARD = $4" >> config.mk
/* config.mk 的内容
ARCH = arm
CPU = arm920t
BOARD = 100ask24x0
SOC = s3c24x0 */
[ "$5" ] && [ "$5" != "NULL" ] && echo "VENDOR = $5" >> config.mk //参数5为空
[ "$6" ] && [ "$6" != "NULL" ] && echo "SOC = $6" >> config.mk
#
# Create board specific header file
#
if [ "$APPEND" = "yes" ] # Append to existing config file //APPEND = no
then
echo >> config.h
else
> config.h # Create new config file //创建一个config.h
fi
echo "/* Automatically generated - do not edit */" >>config.h
echo "#include <configs/$1.h>" >>config.h
// config.h 的内容为
/* Automatically generated - do not edit */
// "#include <configs/100ask24x0.h>"
exit 0
总结:
Create link to architecture specific headers:
Create include file for Make:
Create board specific header file: