【无标题】

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r1
[r1]osp    
[r1]ospf 1
[r1-ospf-1]rout    
[r1-ospf-1]route-id 1.1.1.1
           ^
Error: Unrecognized command found at '^' position.
[r1-ospf-1]q
[r1]ospf 1 ro    
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]a 0
[r1-ospf-1-area-0.0.0.0]ne    
[r1-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.255
[r1-ospf-1-area-0.0.0.0]q
[r1-ospf-1]q
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.1.33
                                             ^
Error:Incomplete command found at '^' position.
[r1-GigabitEthernet0/0/0]ip add 192.168.1.33 27
Jul 27 2024 07:49:38-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r1-GigabitEthernet0/0/0]int 1 0
                             ^
Error: Unrecognized command found at '^' position.
[r1-GigabitEthernet0/0/0]q
[r1]int l    
[r1]int LoopBack 0    
[r1]int LoopBack 0
[r1-LoopBack0]ip add 192.168.1.65 27
[r1-LoopBack0]
<r1>sys
Enter system view, return user view with Ctrl+Z.
[r1]png 192.168.1.5
    ^
Error: Unrecognized command found at '^' position.
[r1]ping 192.168.1.5
  PING 192.168.1.5: 56  data bytes, press CTRL_C to break
    Request time out
    Request time out
    Request time out
    Request time out
    Request time out

  --- 192.168.1.5 ping statistics ---
    5 packet(s) transmitted
    0 packet(s) received
    100.00% packet loss

[r1]1
    ^
Error: Unrecognized command found at '^' position.
[r1]
[r1]
Jul 27 2024 08:09:42-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=34.1.168.192, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
 
[r1]
Jul 27 2024 08:09:42-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=34.1.168.192, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change) 
[r1]
Jul 27 2024 08:09:42-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=34.1.168.192, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing) 
[r1]
Jul 27 2024 08:09:43-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=34.1.168.192, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 

[r1]ping 192.168.1.5
  PING 192.168.1.5: 56  data bytes, press CTRL_C to break
    Request time out
    Request time out
    Request time out
    Request time out
    Request time out

  --- 192.168.1.5 ping statistics ---
    5 packet(s) transmitted
    0 packet(s) received
    100.00% packet loss

[r1]
[r1]
[r1]ping 192.168.1.5
  PING 192.168.1.5: 56  data bytes, press CTRL_C to break
    Request time out
    Request time out
    Request time out
    Request time out
    Request time out

  --- 192.168.1.5 ping statistics ---
    5 packet(s) transmitted
    0 packet(s) received
    100.00% packet loss

[r1]dis ip rou    
[r1]dis ip routing-table pr    
[r1]dis ip routing-table protocol o    
[r1]dis ip routing-table protocol ospf 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : OSPF
         Destinations : 1        Routes : 1        

OSPF routing table status : <Active>
         Destinations : 1        Routes : 1

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

   192.168.1.97/32  OSPF    10   1           D   192.168.1.34    GigabitEthernet
0/0/0

OSPF routing table status : <Inactive>
         Destinations : 0        Routes : 0

[r1]
[r1]
[r1]

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r2
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ip add 192.168.1.34 27
Jul 27 2024 07:51:31-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r2-GigabitEthernet0/0/0]int l0
[r2-LoopBack0]ip add 192.168.1.97 27
[r2-LoopBack0]
<r2>
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]os    
[r2]ospf1
    ^
Error: Unrecognized command found at '^' position.
[r2]ospf 1
[r2-ospf-1]ne    
[r2-ospf-1]a 0
[r2-ospf-1-area-0.0.0.0]dis th
[V200R003C00]
#
 area 0.0.0.0 
#
return
[r2-ospf-1-area-0.0.0.0]net    
[r2-ospf-1-area-0.0.0.0]network 192.168.1.97 0.0.0.0
[r2-ospf-1-area-0.0.0.0]q
[r2-ospf-1]
[r2-ospf-1]
[r2-ospf-1]a 0
[r2-ospf-1-area-0.0.0.0]ne    
[r2-ospf-1-area-0.0.0.0]network 192.168.1.34 0.0.0.0
[r2-ospf-1-area-0.0.0.0]
Jul 27 2024 08:09:43-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=33.1.168.192, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init) 
[r2-ospf-1-area-0.0.0.0]
Jul 27 2024 08:09:43-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=33.1.168.192, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way) 
[r2-ospf-1-area-0.0.0.0]
Jul 27 2024 08:09:43-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=33.1.168.192, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart) 
[r2-ospf-1-area-0.0.0.0]
Jul 27 2024 08:09:43-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=33.1.168.192, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change) 
[r2-ospf-1-area-0.0.0.0]
Jul 27 2024 08:09:43-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=33.1.168.192, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing) 
[r2-ospf-1-area-0.0.0.0]
Jul 27 2024 08:09:43-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=33.1.168.192, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) 

[r2-ospf-1-area-0.0.0.0]dis th
[V200R003C00]
#
 area 0.0.0.0 
  network 192.168.1.34 0.0.0.0 
  network 192.168.1.97 0.0.0.0 
#
return
[r2-ospf-1-area-0.0.0.0]
[r2-ospf-1-area-0.0.0.0]

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r3
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip add 192.168.1.35 27
Jul 27 2024 07:53:42-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip add 192.168.1.1 30
Jul 27 2024 07:53:59-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r3-GigabitEthernet0/0/1]
<r3>

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r4
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ip add 192.168.1.2 30
Jul 27 2024 07:54:49-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r4-GigabitEthernet0/0/0]int g0/0/1
[r4-GigabitEthernet0/0/1]ip add 192.168.1.5 30
Jul 27 2024 07:55:04-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[r4-GigabitEthernet0/0/1]
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]int 
<r4>

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r5
[r5]int g0/0/0
[r5-GigabitEthernet0/0/0]ip add 192.168.1.6 30
Jul 27 2024 07:55:47-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[r5-GigabitEthernet0/0/0]int lo    
[r5-GigabitEthernet0/0/0]int l 0    
[r5-GigabitEthernet0/0/0]int l0    
[r5-GigabitEthernet0/0/0]q
[r5]int lo    
[r5]int LoopBack 0
[r5-LoopBack0]ip add 192.168.1.129 27
[r5-LoopBack0]
<r5>