1,使用工具 ethtool ethx 查看指定网卡的状态
ethtool eth0[code]
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: g
Wake-on: d
Current message level: 0x00000037 (55)
Link detected: yes[/code]
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: g
Wake-on: d
Current message level: 0x00000037 (55)
Link detected: yes[/code]
2.使用mii-tool查看MII状态和网卡速率
3.使用mii-diag查看
mii-diag
Using the default interface 'eth0'.
Basic registers of MII PHY #32: 1100 782d 0000 0000 01e1 41e1 0001 0000.
The autonegotiated capability is 01e0.
The autonegotiated media type is 100baseTx-FD.
Basic mode control register 0x1100: Auto-negotiation enabled.
You have link beat, and everything is working OK.
Your link partner advertised 41e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
End of basic transceiver information.
4、lspci
5、ifconfig
6、