函数原型
void *memcpy(void*dest, const void *src, size_t n);
功能
由src指向地址为起始地址的连续n个字节的数据复制到以destin指向地址为起始地址的空间内。
头文件
#include<string.h>
返回值
函数返回一个指向dest的指针。
说明
1.source和destin所指内存区域不能重叠,函数返回指向destin的指针。
2.与strcpy相比,memcpy并不是遇到'\0'就结束,而是一定会拷贝完n个字节。
memcpy用来做内存拷贝,你可以拿它拷贝任何数据类型的对象,可以指定拷贝的数据长度;
例:
char a[100], b[50];
memcpy(b, a,sizeof(b)); //注意如用sizeof(a),会造成b的内存地址溢出。
strcpy就只能拷贝字符串了,它遇到'\0'就结束拷贝;例:
char a[100], b[50];
strcpy(a,b);
3.如果目标数组destin本身已有数据,执行memcpy()后,将覆盖原有数据(最多覆盖n)。如果要追加数据,则每次执行memcpy后,要将目标数组地址增加到你要追加数据的地址。
//注意,source和destin都不一定是数组,任意的可读写的空间均可。
程序例
example1
作用:将s中的字符串复制到字符数组d中。
//memcpy.c
#include<stdio.h>
#include<string.h>
intmain()
{
char*s="Golden Global View";
chard[20];
clrscr();
memcpy(d,s,strlen(s));
d[strlen(s)]='\0';//因为从d[0]开始复制,总长度为strlen(s),d[strlen(s)]置为结束符
printf("%s",d);
getchar();
return0;
}
输出结果:GoldenGlobal View
example2
作用:将s中第14个字符开始的4个连续字符复制到d中。(从0开始)
#include<string.h>
intmain()
{
char*s="Golden Global View";
chard[20];
memcpy(d,s+14,4);//从第14个字符(V)开始复制,连续复制4个字符(View)
//memcpy(d,s+14*sizeof(char),4*sizeof(char));也可
d[4]='\0';
printf("%s",d);
getchar();
return0;
}
输出结果: View
example3
作用:复制后覆盖原有部分数据
#include<stdio.h>
#include<string.h>
intmain(void)
{
charsrc[] = "******************************";
chardest[] = "abcdefghijlkmnopqrstuvwxyz0123as6";
printf("destinationbefore memcpy: %s\n", dest);
memcpy(dest,src, strlen(src));
printf("destinationafter memcpy: %s\n", dest);
return0;
}
输出结果:
destinationbefore memcpy:abcdefghijlkmnopqrstuvwxyz0123as6
destinationafter memcpy: ******************************as6
551 #ifndef __HAVE_ARCH_MEMCPY
552 /**
553 * memcpy - Copy one area of memory to another
554 * @dest: Where to copy to
555 * @src: Where to copy from
556 * @count: The size of the area.
557 *
558 * You should not use this function to access IO space, use memcpy_toio()
559 * or memcpy_fromio() instead.
560 */
561 void *memcpy(void *dest, const void *src, size_t count)
562 {
563 char *tmp = dest;
564 const char *s = src;
565
566 while (count--)
567 *tmp++ = *s++;
568 return dest;
569 }
570 EXPORT_SYMBOL(memcpy);
571 #endif
memcpy函数是内存拷贝函数,用于将一段内存空间数据拷贝到另一段内存空间中,但是它和memmove函数不同的是,它对内存空间有要求的,dest和src所指向的内存空间不能重叠,否则的数据是错误的。
例如:
src所指向的内存空间后面部分数据被新拷贝的数据给覆盖了,所以拷贝到最后,数据肯定不是原来的数据。
如果内存空间像上图所示,就不会导致数据拷贝错误这种情况,也就说你在使用这个函数之前,还需要做一个判断,如果dest < src你才能使用这个函数,不过完全没有必要,你直接使用另外一个函数memmove函数就可以了。