双点重发布实验

一，实验拓扑

 

二，实验配置

 [R1]int g 0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.12.1 24
[R1-GigabitEthernet0/0/0]int g 0/0/1
[R1-GigabitEthernet0/0/1]ip add 192.168.13.1 24
[R1-GigabitEthernet0/0/1]int l 0
[R1-LoopBack0]ip add 1.1.1.1 24
 
[R2]int g 0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.12.2 24
[R2-GigabitEthernet0/0/0]int g 0/0/1
[R2-GigabitEthernet0/0/1]ip add 192.168.24.2 24
 
[R3]int g 0/0/0
[R3-GigabitEthernet0/0/0]ip add 192.168.13.3 24
[R3-GigabitEthernet0/0/0]int g 0/0/1
[R3-GigabitEthernet0/0/1]ip add 192.168.34.3 24
 
[R4]int g 0/0/0
[R4-GigabitEthernet0/0/0]ip add 192.168.24.4 24
[R4-GigabitEthernet0/0/0]int g 0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.34.4 24

ospf

[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1]a 0
[R1-ospf-1-area-0.0.0.0]network 192.168.12.1 0.0.0.0
[R1-ospf-1-area-0.0.0.0]network 192.168.13.1 0.0.0.0
 
[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]a 0
[R2-ospf-1-area-0.0.0.0]network 192.168.12.2 0.0.0.0
 
[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]a 0
[R3-ospf-1-area-0.0.0.0]network 192.168.13.3 0.0.0.0

rip

[R2]rip 1
[R2-rip-1]version 2
[R2-rip-1]network 192.168.24.0
 
[R3]rip 1
[R3-rip-1]version 2
[R3-rip-1]network 192.168.34.0
 
[R4]rip 1
[R4-rip-1]version 2
[R4-rip-1]network 192.168.24.0
[R4-rip-1]network 192.168.34.0

r1引入ospf

[R1]ip ip-prefix aa permit 1.1.1.0 24
[R1]route-policy aa permit node 10
[R1-route-policy]if-match ip-prefix aa
[R1-route-policy]q
[R1]ospf 1
[R1-ospf-1]import-route direct route-policy aa

r2 r3进行重发布

[R2]ospf 1
[R2-ospf-1]import-route rip 1
[R2-ospf-1]q
[R2]rip 1
[R2-rip-1]import-route ospf 1
 
[R3]ospf 1
[R3-ospf-1]import-route rip 1
[R3-ospf-1]q
[R3]rip 1
[R3-rip-1]import-route ospf 1