OpenServer 2.0














SCO UnixWare 7.x Introduction: ------------- This document describes the procedure to install the SCO UnixWare 7 driver for 10/100M PCI Fast Ethernet Adapter. Location of Driver: \uw7\rtspkg.tar Installing driver procedure on SCO UnixWare7 : ----------------------------------------- Before you start with the installation process, make sure that the SCO UNIX system is properly installed. Similarly, your adapter should also be properly installed in your machine. 1. Installation Diskette in DOS format. Put RTL SCO UnixWare Driver diskette to floppy A: and use doscp command to copy RTL SCO UnixWare Driver into UNIX's directories. NOTE: In UnixWare 7.1.1, you must install the "mtools" package included within the OS and use "mcopy" instead of "doscp". # cd / # doscp A:uw7/rtspkg.tar /tmp 2. Run 'tar' utility to extract the driver. # cd /tmp # tar -xvf rtspkg.tar 3. Run 'pkgadd' utility to add the driver software to system. # pkgadd -d /tmp/pkg => Select "RTL8139" to add the driver package to the system. => quit 4. Use 'scoadmin' utility to add adapters. # scoadmin => Select "Networking" item from the item list and press enter. => Select "Network Configuration Manager" item from the item list and press enter. => Select "Add New Lan Adapter" menu item from "Hardware". => Select the Realtek RTL8139C+/8139/810x item from the item list. => Add protocol(s) to the adapter. 5. Return to the command prompt. 6. Shutdown the system and reboot. NOTE: 1. If you want to install more than one network adapter, you should do the 4th, 5th, 6th steps above for each network card separately. 2. This driver can support up to four network adapters.
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

刘欣的博客

你将成为第一个打赏博主的人!

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值