resbuf的理解

最新推荐文章于 2023-11-14 11:49:55 发布

pangshaohua

最新推荐文章于 2023-11-14 11:49:55 发布

阅读量4.9k

点赞数 5

分类专栏： Arx 文章标签： struct structure buffer cmd 扩展 null

本文链接：https://blog.csdn.net/pangshaohua/article/details/5408052

版权

Arx 专栏收录该内容

62 篇文章 10 订阅

订阅专栏

resbuf(Result buffer structure:结果缓存区表)是用来处理所有AutoCAD的基本数据类型的.
struct resbuf {
        struct resbuf *rbnext; //指向下一个resbuf的指针
        short restype;  //查询参数的种类,是一个DXF组码
        union ads_u_val resval; //相应种类的匹配值
};
从定义上我们可以看出,结构resbuf是一个链表,每一个缓冲区指定一个检查参数和匹配的值;缓冲区的restype段是一个DXF组码,它指示要查询

的参数的种类,而缓冲区的resval域指定要匹配的值.
union ads_u_val {
   ads_real rreal;
   ads_real rpoint[3];
   short rint;
   char *rstring;
   long rlname[2];
   long rlong;
   struct ads_binary rbinary;
   unsigned char ihandle[8]; //可能临时使用,目前仅仅为内部使用
};

//打印扩展数据列表, void printList(struct resbuf* pRb) { int rt, i; char buf[133]; for (i = 0;pRb != NULL;i++, pRb = pRb->rbnext) { if (pRb->restype < 1010) { rt = RTSTR; } else if (pRb->restype < 1040) { rt = RT3DPOINT; } else if (pRb->restype < 1060) { rt = RTREAL; } else if (pRb->restype < 1071) { rt = RTSHORT; } else if (pRb->restype == 1071) { rt = RTLONG; } else { /*记住,这里else可能为>1071的数,从而为后面的pRb->restype == RTSHORT做了工作, #define RTNONE 5000 #define RTREAL 5001 #define RTPOINT 5002 #define RTSHORT 5003 #define RTANG 5004 #define RTSTR 5005 #define RTENAME 5006 #define RTPICKS 5007 #define RTORINT 5008 #define RT3DPOINT 5009 #define RTLONG 5010 #define RTVOID 5014 */ rt = pRb->restype; } switch (rt) { case RTSHORT: if (pRb->restype == RTSHORT) { acutPrintf( "RTSHORT : %d/n", pRb->resval.rint); } else { acutPrintf("(%d . %d)/n", pRb->restype, pRb->resval.rint); }; break; case RTREAL: if (pRb->restype == RTREAL) { acutPrintf("RTREAL : %0.3f/n", pRb->resval.rreal); } else { acutPrintf("(%d . %0.3f)/n", pRb->restype, pRb->resval.rreal); }; break; case RTSTR: if (pRb->restype == RTSTR) { acutPrintf("RTSTR : %s/n", pRb->resval.rstring); } else { acutPrintf("(%d . /"%s/")/n", pRb->restype, pRb->resval.rstring); }; break; case RT3DPOINT: if (pRb->restype == RT3DPOINT) { acutPrintf( "RT3DPOINT : %0.3f, %0.3f, %0.3f/n", pRb->resval.rpoint[X], pRb->resval.rpoint[Y], pRb->resval.rpoint[Z]); } else { acutPrintf("(%d %0.3f %0.3f %0.3f)/n", pRb->restype, pRb->resval.rpoint[X], pRb->resval.rpoint[Y], pRb->resval.rpoint[Z]); } break; case RTLONG: acutPrintf("RTLONG : %dl/n", pRb->resval.rlong); break; } //这里为什么要有这个,主要是为了当记录多的时候,起到翻页功能,就要cmd dir /p类似 if ((i == 23) && (pRb->rbnext != NULL)) { i = 0; acedGetString(0, "Press <ENTER> to continue...", buf); } }