mp4文件moov atom放置在mdat atom之前 代码实现

         使用nginx搭建http mp4/flv流媒体服务器，要求mp4文件moov atom要放置在mdat atom前，才能边下载边播放。参考php-qtfaststart项目，测试代码如下：

#include <stdio.h>
#include <stdlib.h>
#include <inttypes.h>
#include <string.h>


#ifdef __MINGW32__
#define fseeko(x, y, z) fseeko64(x, y, z)
#define ftello(x)       ftello64(x)
#endif


#define BE_16(x) ((((uint8_t*)(x))[0] <<  8) | ((uint8_t*)(x))[1])


#define BE_32(x) ((((uint8_t*)(x))[0] << 24) |  \
                  (((uint8_t*)(x))[1] << 16) |  \
                  (((uint8_t*)(x))[2] <<  8) |  \
                   ((uint8_t*)(x))[3])


#define BE_64(x) (((uint64_t)(((uint8_t*)(x))[0]) << 56) |  \
                  ((uint64_t)(((uint8_t*)(x))[1]) << 48) |  \
                  ((uint64_t)(((uint8_t*)(x))[2]) << 40) |  \
                  ((uint64_t)(((uint8_t*)(x))[3]) << 32) |  \
                  ((uint64_t)(((uint8_t*)(x))[4]) << 24) |  \
                  ((uint64_t)(((uint8_t*)(x))[5]) << 16) |  \
                  ((uint64_t)(((uint8_t*)(x))[6]) <<  8) |  \
                  ((uint64_t)( (uint8_t*)(x))[7]))


#define BE_FOURCC(ch0, ch1, ch2, ch3)           \
    ( (uint32_t)(unsigned char)(ch3)        |   \
     ((uint32_t)(unsigned char)(ch2) <<  8) |   \
     ((uint32_t)(unsigned char)(ch1) << 16) |   \
     ((uint32_t)(unsigned char)(ch0) << 24) )


#define QT_ATOM BE_FOURCC
/* top level atoms */
#define FREE_ATOM QT_ATOM('f', 'r', 'e', 'e')
#define JUNK_ATOM QT_ATOM('j', 'u', 'n', 'k')
#define MDAT_ATOM QT_ATOM('m', 'd', 'a', 't')
#define MOOV_ATOM QT_ATOM('m', 'o', 'o', 'v')
#define PNOT_ATOM QT_ATOM('p', 'n', 'o', 't')
#define SKIP_ATOM QT_ATOM('s', 'k', 'i', 'p')
#define WIDE_ATOM QT_ATOM('w', 'i', 'd', 'e')
#define PICT_ATOM QT_ATOM('P', 'I', 'C', 'T')
#define FTYP_ATOM QT_ATOM('f', 't', 'y', 'p')
#define UUID_ATOM QT_ATOM('u', 'u', 'i', 'd')


#define CMOV_ATOM QT_ATOM('c', 'm', 'o', 'v')
#define STCO_ATOM QT_ATOM('s', 't', 'c', 'o')
#define CO64_ATOM QT_ATOM('c', 'o', '6', '4')


#define ATOM_PREAMBLE_SIZE    8
#define COPY_BUFFER_SIZE   1024


int do_faststart(char *in, char *out)
{
    FILE *infile  = NULL;
    FILE *outfile = NULL;
    unsigned char atom_bytes[ATOM_PREAMBLE_SIZE];
    uint32_t atom_type   = 0;
    uint64_t atom_size   = 0;
    uint64_t atom_offset = 0;
    uint64_t last_offset;
    unsigned char *moov_atom = NULL;
    unsigned char *ftyp_atom = NULL;
    uint64_t moov_atom_size;
    uint64_t ftyp_atom_size = 0;
    uint64_t i, j;
    uint32_t offset_count;
    uint64_t current_offset;
    uint64_t start_offset = 0;
uint64_t moov_offset = 0;
uint64_t moov_size = 0;
uint64_t mdat_offset = 0;
uint64_t mdat_size = 0;
    unsigned char copy_buffer[COPY_BUFFER_SIZE];
    int bytes_to_copy;


    infile = fopen(in, "rb");
    if (!infile) {
        //perror(in);
        goto error_out;
    }


    /* traverse through the atoms in the file to make sure that 'moov' is
     * at the end */
    while (!feof(infile)) {
        if (fread(atom_bytes, ATOM_PREAMBLE_SIZE, 1, infile) != 1) {
            break;
        }
        atom_size = (uint32_t) BE_32(&atom_bytes[0]);
        atom_type = BE_32(&atom_bytes[4]);


        /* keep ftyp atom */
        if (atom_type == FTYP_ATOM) {
            ftyp_atom_size = atom_size;
            free(ftyp_atom);
            ftyp_atom = malloc(ftyp_atom_size);
            if (!ftyp_atom) {
                //printf("could not allocate %"PRIu64" bytes for ftyp atom\n",atom_size);
                goto error_out;
            }
            fseeko(infile, -ATOM_PREAMBLE_SIZE, SEEK_CUR);
            if (fread(ftyp_atom, atom_size, 1, infile) != 1) {
                //perror(in);
                goto error_out;
            }
            start_offset = ftello(infile);
        } else {


            /* 64-bit special case */
            if (atom_size == 1) {
                if (fread(atom_bytes, ATOM_PREAMBLE_SIZE, 1, infile) != 1) {
                    break;
                }
                atom_size = BE_64(&atom_bytes[0]);
                fseeko(infile, atom_size - ATOM_PREAMBLE_SIZE * 2, SEEK_CUR);
            } else {
                fseeko(infile, atom_size - ATOM_PREAMBLE_SIZE, SEEK_CUR);
            }
        }
        printf("%c%c%c%c %10"PRIu64" %"PRIu64"\n",
               (atom_type >> 24) & 255,
               (atom_type >> 16) & 255,
               (atom_type >>  8) & 255,
               (atom_type >>  0) & 255,
               atom_offset,
               atom_size);


if(atom_type == MOOV_ATOM){
     moov_offset = atom_offset;
 moov_size = atom_size;
}else if(atom_type == MDAT_ATOM){
     mdat_offset = atom_offset;
 mdat_size = atom_size;
}

        if ((atom_type != FREE_ATOM) &&
            (atom_type != JUNK_ATOM) &&
            (atom_type != MDAT_ATOM) &&
            (atom_type != MOOV_ATOM) &&
            (atom_type != PNOT_ATOM) &&
            (atom_type != SKIP_ATOM) &&
            (atom_type != WIDE_ATOM) &&
            (atom_type != PICT_ATOM) &&
            (atom_type != UUID_ATOM) &&
            (atom_type != FTYP_ATOM)) {
            //printf("encountered non-QT top-level atom (is this a QuickTime file?)\n");
            break;
        }
        atom_offset += atom_size;


        /* The atom header is 8 (or 16 bytes), if the atom size (which
         * includes these 8 or 16 bytes) is less than that, we won't be
         * able to continue scanning sensibly after this atom, so break. */
        if (atom_size < 8)
            break;
    }


    /*
    if (atom_type != MOOV_ATOM) {
        printf("last atom in file was not a moov atom\n");
        free(ftyp_atom);
        fclose(infile);
        return 0;
    }*/


if(moov_offset < mdat_offset){
printf("moov atom is before in mdat atom\n");
        free(ftyp_atom);
        fclose(infile);
        return 0;
}


if(moov_offset == 0 || moov_size == 0){
printf("don't found moov atom in file\n");
        free(ftyp_atom);
        fclose(infile);
        return 0;
}


    /* moov atom was, in fact, the last atom in the chunk; load the whole
     * moov atom */
    //fseeko(infile, -atom_size, SEEK_END);
fseeko(infile, moov_offset, SEEK_SET);
printf("seek to moov atom:%x\n",moov_offset);
    last_offset    = ftello(infile);
    //moov_atom_size = atom_size;
moov_atom_size = moov_size;
    moov_atom      = malloc(moov_atom_size);
    if (!moov_atom) {
        //printf("could not allocate %"PRIu64" bytes for moov atom\n", atom_size);
        goto error_out;
    }
    if (fread(moov_atom, moov_atom_size, 1, infile) != 1) {
        //perror(in);
        goto error_out;
    }


    /* this utility does not support compressed atoms yet, so disqualify
     * files with compressed QT atoms */
    if (BE_32(&moov_atom[12]) == CMOV_ATOM) {
        //printf("this utility does not support compressed moov atoms yet\n");
        goto error_out;
    }


    /* close; will be re-opened later */
    fclose(infile);
    infile = NULL;


    /* crawl through the moov chunk in search of stco or co64 atoms */
    for (i = 4; i < moov_atom_size - 4; i++) {
        atom_type = BE_32(&moov_atom[i]);
        if (atom_type == STCO_ATOM) {
            printf(" patching stco atom...\n");
            atom_size = BE_32(&moov_atom[i - 4]);
            if (i + atom_size - 4 > moov_atom_size) {
                //printf(" bad atom size\n");
                goto error_out;
            }
            offset_count = BE_32(&moov_atom[i + 8]);
            for (j = 0; j < offset_count; j++) {
                current_offset  = BE_32(&moov_atom[i + 12 + j * 4]);
                current_offset += moov_atom_size;
                moov_atom[i + 12 + j * 4 + 0] = (current_offset >> 24) & 0xFF;
                moov_atom[i + 12 + j * 4 + 1] = (current_offset >> 16) & 0xFF;
                moov_atom[i + 12 + j * 4 + 2] = (current_offset >>  8) & 0xFF;
                moov_atom[i + 12 + j * 4 + 3] = (current_offset >>  0) & 0xFF;
            }
            i += atom_size - 4;
        } else if (atom_type == CO64_ATOM) {
            printf(" patching co64 atom...\n");
            atom_size = BE_32(&moov_atom[i - 4]);
            if (i + atom_size - 4 > moov_atom_size) {
                //printf(" bad atom size\n");
                goto error_out;
            }
            offset_count = BE_32(&moov_atom[i + 8]);
            for (j = 0; j < offset_count; j++) {
                current_offset  = BE_64(&moov_atom[i + 12 + j * 8]);
                current_offset += moov_atom_size;
                moov_atom[i + 12 + j * 8 + 0] = (current_offset >> 56) & 0xFF;
                moov_atom[i + 12 + j * 8 + 1] = (current_offset >> 48) & 0xFF;
                moov_atom[i + 12 + j * 8 + 2] = (current_offset >> 40) & 0xFF;
                moov_atom[i + 12 + j * 8 + 3] = (current_offset >> 32) & 0xFF;
                moov_atom[i + 12 + j * 8 + 4] = (current_offset >> 24) & 0xFF;
                moov_atom[i + 12 + j * 8 + 5] = (current_offset >> 16) & 0xFF;
                moov_atom[i + 12 + j * 8 + 6] = (current_offset >>  8) & 0xFF;
                moov_atom[i + 12 + j * 8 + 7] = (current_offset >>  0) & 0xFF;
            }
            i += atom_size - 4;
        }
    }


    /* re-open the input file and open the output file */
    infile = fopen(in, "rb");
    if (!infile) {
        //perror(in);
        goto error_out;
    }


    
    if (start_offset > 0) { /* seek after ftyp atom */
        fseeko(infile, start_offset, SEEK_SET);
        last_offset -= start_offset;
    }
    fseeko(infile, start_offset, SEEK_SET);


    outfile = fopen(out, "wb");
    if (!outfile) {
        //perror(out);
        goto error_out;
    }


    /* dump the same ftyp atom */
    if (ftyp_atom_size > 0) {
        //printf(" writing ftyp atom...\n");
        if (fwrite(ftyp_atom, ftyp_atom_size, 1, outfile) != 1) {
            //perror(out);
            goto error_out;
        }
    }


    /* dump the new moov atom */
    //printf(" writing moov atom...\n");
    if (fwrite(moov_atom, moov_atom_size, 1, outfile) != 1) {
        //perror(out);
        goto error_out;
    }


    /* copy the remainder of the infile, from offset 0 -> last_offset - 1 */
    //printf(" copying rest of file...\n");
    while (last_offset) {
        if (last_offset > COPY_BUFFER_SIZE)
            bytes_to_copy = COPY_BUFFER_SIZE;
        else
            bytes_to_copy = last_offset;


        if (fread(copy_buffer, bytes_to_copy, 1, infile) != 1) {
            //perror(in);
            goto error_out;
        }
        if (fwrite(copy_buffer, bytes_to_copy, 1, outfile) != 1) {
            //perror(out);
            goto error_out;
        }
        last_offset -= bytes_to_copy;
    }


    fclose(infile);
    fclose(outfile);
    free(moov_atom);
    free(ftyp_atom);


    return 0;


error_out:
printf("transcode %s to %s failed.\n",in, out);
    if (infile)
        fclose(infile);
    if (outfile)
        fclose(outfile);
    free(moov_atom);
    free(ftyp_atom);
    return 1;
}




int main(int argc, char *argv[])
{
    if (argc != 3) {
        printf("Usage: qt-faststart <infile.mov> <outfile.mov>\n");
        return 0;
    }


    if (!strcmp(argv[1], argv[2])) {
        fprintf(stderr, "input and output files need to be different\n");
        return 1;
    }
    return do_faststart(argv[1],argv[2]);
}